Beacon-Docs/docs/upgrading.md

Upgrading

Upgrading to 2.0.0 from 1.x

2.0.0 needs a fresh database. It starts from a new schema baseline. Pointed at a 1.x database it refuses to start with:

database schema predates Beacon 2.0.0; 2.0.0 needs a fresh database

1.x history does not carry over. For the all-in-one stack, in this order:

1. Stop the stack and keep a copy of everything you edited.

docker compose down
cp -r ../docker-deployment-type1 ../docker-deployment-type1.bak   # .env, config.yaml, Caddy files, blocklist

2. Update the deployment files. If the folder is a git clone, git pull will refuse because the 1.x layout tracked .env and you edited docker-compose.yml:

git checkout -- . && git pull

Then put your own files back from the copy: .env, data/app/config.yaml, and anything you changed under data/Caddy/. Do not copy docker-compose.yml back; re-apply your POSTGRES_PASSWORD to the new one instead.

3. Fix the database names. The user and database are called beacon now, not tower. In .env, change both in POSTGRES_DSN (postgres://beacon:...@db:5432/beacon). The new docker-compose.yml already uses beacon. The names only have to agree with each other, so if you have already initialised a 2.0.0 database under tower, either keep tower in both places or move that data directory away as well.

4. Move the 1.x database away and start. Postgres only creates the user and database on an empty data directory, so do this after step 3, not before:

mv data/postgres data/postgres-1.x   # or rm -rf data/postgres once you no longer need it
docker compose pull
docker compose up -d

docker compose down also lets the network come back with the new fixed subnet. If 172.30.0.0/24 is already used on your host, pick another in docker-compose.yml and change server.trusted_proxies in data/app/config.yaml to match.

Config that stops startup if left as it was:

• Every manual scopes: entry needs region: set to one of your regions: slugs.
• MeshMapper refresh intervals must be within bounds: meshmapper.scopes.refresh_interval 1h to 24h, meshmapper.zones.refresh_interval and meshmapper.channels.refresh_interval 24h to 168h.
• packets.retention and analytics.rollup_retention must be at least 24h.
• server.trusted_proxies entries must be CIDRs (10.0.0.5/32, not 10.0.0.5).

Other changes to review:

• meshmapper.scopes.sources is ignored, with a warning. Scope catalogues are now found through MeshMapper's zone list for every known IATA.
• REST rate limiting is on by default: 300 requests per minute per client IP on /api/v1/* (IPv6 clients share a /64), answered with 429 and Retry-After. Behind a proxy, set server.trusted_proxies and have the proxy send X-Real-IP (see Reverse proxy); X-Forwarded-For and True-Client-IP are not trusted. Tune or turn it off under ratelimit:.
• WebSocket upgrades are rate limited to websocket.max_connects_per_minute (default 10) per client IP, on top of max_connections_per_ip (default 5). Only the page's own host may open /ws unless you list other origins in websocket.allowed_origins, for example when the web app is served from a different host than the API.
• packets.retention now defaults to 7 days and also covers observations and channel messages. Historical stats come from hourly rollups kept for analytics.rollup_retention (90 days).
• Admin endpoints under /api/v1/admin/ need BEACON_API_KEY (or auth.api_key).
• Image tags: latest is the newest stable release from main. Pin :2.0 on both images if you want to choose when to move to the next minor release.

app_config/config.yaml.example is the full 2.0.0 reference.

Routine upgrades

Pin both images to the same release line in docker-compose.yml (see Image tags), then:

docker compose pull
docker compose up -d

Database migrations run when the server starts. Read the release notes first; a release that needs a config change says so there. Keep server and web on the same X.Y.

Since server 2.0.4, a server can require a minimum Beacon Web version (minWebVersion at GET /api/v1/info; see web.min_web_version in Configuration). An older web build shows a "reload" screen instead of the app, so pull the web image together with the server.

MeshMapper API authentication rollout

When upgrading to a Beacon build with MeshMapper API authentication, configure the key before relying on imports. Ask your local MeshMapper regional or grouped-region admin for a key covering the required APIs and your region or all member regions. Confirm MeshMapper Server supports X-API-Key before enforcement; see MeshMapper API key for the rollout details.

Set MESHMAPPER_API_KEY in the backend .env, then recreate the app container:

docker compose up -d --force-recreate app

Without a key, Beacon keeps running and retains saved imports, but MeshMapper refreshes are unconfigured. Existing IP exemptions are not a substitute for a key. After configuring one, check the MeshMapper logs for successful refreshes; existing backoff still applies. If you use backups, leave meshmapper.api_key empty in the saved YAML and keep the key in the environment. Exports refuse a nonempty saved YAML key.

REST rate limit raised to 600

Newer builds default ratelimit.requests_per_minute (and burst) to 600 a minute instead of 300. Opening the Map and Nodes tabs on a region of a few thousand nodes could run past 300 and leave the map half loaded. The shipped config.yaml templates set the value explicitly, so an existing deployment keeps 300 until you change it:

ratelimit:
  enabled: true
  requests_per_minute: 600
  burst: 600

Then run docker compose restart app. If you run the fail2ban jails, the flood jail's maxretry of 900 still sits above the new limit.

Upgrading to 2.1

Server 2.1.0 is one upgrade from any 2.0.x release. It runs migrations 004 to 053 at startup, adds two read models that region and scope pages are served from, and drops indexes and one column nothing reads any more. No config change is required. Beacon Web must move to 2.1 at the same time (minWebVersion is 2.1.0; an older web build shows the reload screen). The minimum app version stays 2.0.0, so installed apps keep working.

The upgrade has two phases. First the server runs its migrations while the API and ingest are down. Then it serves the API again and fills the read models in the background; until each one is ready, the pages it serves answer 503 with Retry-After. Web and app retry for about 90 s, then show an error with a retry button.

Before you upgrade

1. Back up the database; see Backing up. The rollback does not need the backup, but it is the only way back from anything unexpected.

2. Disk. On a large deployment the release adds about 1 GB net (the new packet_sites table is about 2.3 GB; dropped indexes free the rest), and the first fill writes about 8 GB of WAL within minutes. Keep that much free on the volume under data/postgres/, with room to spare.

3. Slow disk or small VM (rotational, network or shared storage, or a few GB of RAM): set readmodels.fill.duty: 0.25 and readmodels.fill.packet_sites_slice: 100000 in config.yaml before upgrading. At full speed the first fill can stall such a machine; paced, it takes longer but the server stays responsive. See Pacing the backfills.

4. Connections. The server now opens one pool per workload: 20 connections by default, plus one for each CPU above 6. Check that Postgres max_connections leaves room for that and your own sessions; see Database pools and connections.

5. Large deployments only (tens of millions of routes, hundreds of millions of observations): pre-build the new indexes off-peak, while the old version keeps running, to shorten the startup pause:

   • the route hop index (10 to 25 minutes at startup otherwise),
   • the four packets indexes,
   • the observer adverts index.

   Everyone else can skip this: the server builds them at startup.

6. Run the pre-deploy check (no long transactions, no anti-wraparound vacuum, no pg_dump running), and pick a quiet hour.

Upgrade

Pull and start the server and web images together, as in Routine upgrades:

docker compose pull
docker compose up -d

What happens, and how long

Phase	Pages affected	Small deployment	Large deployment
Startup migrations	Whole API and ingest down; packets arriving meanwhile are not stored	Seconds	Under a minute with the indexes pre-built; add 10 to 25 minutes for the route hop index and a few more for the others if not. Two checks on packets (026, 028) always run here
Channel messages by site	Channel message pages filtered by iatas, region or scope answer 503	Seconds	About 1 to 5 minutes
Packets by site	/packets filtered by iatas, iata, region or regionId answer 503	Seconds to minutes	Roughly 5 to 20 minutes at duty: 1; about twice that at the default 0.5, four times at 0.25
Observation payload types	Observer advert pages answer 503	About a minute when every observation already has its type	Up to about 80 minutes when many observations have none

A slow disk stretches every phase: on a test server with a rotational disk and about 6 million observations, the migrations took 8 minutes and the fills at duty: 0.25 about an hour.

Measured on a large deployment (8 vCPU, 8 GB RAM, NVMe; 91 GB database with 35 million routes, 30 million observations and 3 million packets; default pacing):

Step	Time
Pre-building the eight indexes, old version still serving	1 min 50 s (route hop index 72 s, adverts index 16 s, the rest under 8 s each)
Migrations 004 to 053 at startup	7.4 s (the two packets checks 3.7 s and 1.8 s)
API and ingest down	about 15 s
Channel message pages by site back	8 min after startup
Observer advert pages	at once (no untyped observations)
Region packet pages back	50 min after startup
Database size	91 GB before, 71 GB after

The region packet fill walks the whole observation id range, newest to oldest, so a database that still holds a few very old observations fills for longer than its row count suggests, and the eta in its progress lines overstates the time left.

Watch the log for these lines; each one ends a phase:

• Beacon listening on :8080: migrations done, API up.
• cmi trusted: region and scope message pages read channel_message_iatas
• packet_sites trusted: region packet pages read packet_sites
• ... backfill progress lines show a fill moving.

After that the server keeps both read models up to date as it ingests, and earns their trust again within a second or two of every later restart. If trust ever drops, the log says read model untrusted ... and later read model trusted again: its pages are served from it; see Pages that wait for a read model.

After upgrading

• Ingest cost. Each stored observation now costs about 15 to 21 % more insert time and 37 to 53 % more WAL. Watch beacon_ingest_queue_depth for the first hours; see Ingest cost.
• Alerts. Load the read-model Untrusted rules, BeaconAdvertsNotReady, BeaconSlowPoolBusy and the sequence rules from Example alert rules.
• Route maintenance. The first route retention run after the upgrade is a full pass; on a large deployment it takes 12 to 14 minutes in short statements. See After upgrading: route maintenance.
• Optional, large deployments, once, off-peak: compact observers and channels and rebuild the route keyset indexes.
• Plan checks. Turn on the daily plan check only after the upgrade, if you want it.

Rolling back from 2.1

Lighter steps first, without changing images:

• Region or scope pages misbehave: set readmodels.cmi.enabled: false or readmodels.packet_sites.enabled: false and restart. Those pages answer 503 until it is true again; see Configuration.
• Pool or plan trouble: database.api_plan_layout: single and restart; see Rolling back the pool layout.

To go back to 2.0.7, two objects it needs must come back first, because migrations 046 and 053 removed them:

ALTER TABLE known_routes ADD COLUMN last_reconfirmed_at timestamp with time zone DEFAULT now() NOT NULL;
CREATE INDEX CONCURRENTLY idx_observations_observer_id ON packet_observations USING btree (observer_id, id);
SELECT indisvalid AND indisready FROM pg_index WHERE indexrelid = 'idx_observations_observer_id'::regclass;

The ALTER is a catalog change (milliseconds, brief lock on known_routes). Run the CREATE on its own in autocommit mode; on a large deployment it takes about a minute or two, and the SELECT must print t. Then deploy the 2.0.7 server and a matching 2.0 web build. The other dropped indexes are optional; their statements are in Lookup-table indexes and the route stamp column. Upgrading again later needs nothing by hand: the server repairs both read models at startup before any page reads them.

What changed, by area

Reference for operators who want the detail behind each phase above.

Packets: checks, indexes and exact cursors (025 to 033)

Exact page cursors (nextPageCursor and pageCursor) on /packets, /nodes and /observers; see Exact page cursors. Two checks, four indexes and a statistics object on packets. The checks (026, 028) scan packets at startup and cannot be pre-built. Pre-build only the four indexes; don't create the checks or the statistics object yourself, or startup stops on an object that already exists.

Observer adverts index and payload-type backfill (034)

A partial index for /observers/{observerId}/adverts, read once a background job has filled in missing observation payload types. Until it reports done, advert pages answer 503. See After upgrading: observation payload types, which also shows how to mark it done by hand. Five stats and traces statements move to the api_custom pool; see After upgrading: stats and traces on the custom pool.

Channel messages by site (035 to 041)

channel_message_iatas, the read model behind channel message pages filtered by iatas or scope. Its indexes build on an empty table in under a second. See Read models: channel messages by site for what to watch, the metrics and alerts, and how read-only servers decide.

Packets by site (042 to 045)

packet_sites, the read model behind /packets filtered by iatas, iata, region or regionId. Those pages gain nextPageCursor. Migration 042 takes a brief lock on packets. See Read models: packets by site.

Pools, dropped indexes and a dropped column (046 to 053)

• api_legacy opens only under the single layout. api_slow (2 connections by default, database.slow_pool_size, 120 s statement limit) runs the few statements that may read whole site histories; see Slow region and message statements.
• 046 drops idx_observations_observer_id, 047 to 052 drop six cold lookup-table indexes, and 053 drops known_routes.last_reconfirmed_at. Every 2.0.x image reads or writes that column, hence the rollback steps above.

Read-model pages without fallback

Region /packets pages, channel message pages filtered by iatas (or by scope without since), and observer advert pages are served only from their read model or backfilled data. While that is not ready they answer 503 with Retry-After: 30; there is no fallback to the previous statements. The kill switches above turn those pages off instead of serving them from the previous statements. A page whose statement runs past its pool's limit answers 503 with Retry-After: 10. To get the fallbacks back, revert their one server commit; see Reverting to the read-model fallbacks.

Changes that need a restart

Beacon reads config.yaml once at startup. After editing it, run docker compose restart app. On the next start:

• A newly added channel key decrypts the matching stored messages. Look for config: backfilled N previously-undecrypted channel message(s) in the log.
• Border file and MeshMapper import changes take effect.
• Changed admin or MeshMapper keys in the YAML file are picked up.

For environment changes in .env, use docker compose up -d --force-recreate app instead. A container restart reuses its old environment.

The one runtime-only setting is CORS origins: PUT /api/v1/admin/config changes them without a restart, and nothing is written to the file, so a restart reloads whatever the file says.