- visually closer to pm3 (differenciate groups and commands)
- "dumphelp" allows to quickly dump all cmds and their options
- now all commands support '-h', so e.g. `hw settings store -h` will print help instead of storing
- no more command description in decorator, it is now taken from argparse description
nfc_tag_mf1_write_mode_t has one new mode SHADOW_REQ.
Client can set SHADOW or SHADOW_REQ, internally it will be transformed to SHADOW_REQ.
When it's time to save data, if SHADOW_REQ, the fw will change it to SHADOW and still allow to save the data before acting as shadow.
Breaking: when client reads back MF1 write mode just after settings SHADOW and before saving config, it will receive SHADOW_REQ and must be ready to handle this new enum value.
Now data length is always in bits
Option -o => -a and only needed to turn field on without select or data
Reorganize pcd_14a_reader_raw_cmd
Some more checks
Disruptive changes:
- tag types are 2-byte long with new values
- GET_SLOT_INFO returns 32 bytes as tag types are now 2-byte long
- "enable" is not common to one slot anymore but bound to the HF or LF part
- GET_ENABLED_SLOTS returns 16 bytes as we get "enabled_hf" and "enabled_lf" for each slot
- SET_SLOT_ENABLE needs 3 bytes slot_number|sense_type|enable as we need to specify to enable HF or LF
- slotConfig changed a lot but this is internal to the fw and its flash and a function does the format conversion on first boot after flash
so slot data is preserved on fw upgrade, but if one downgrades to a previous version, data will be erased.
MF1_DETECT_DARKSIDE was actually runnign the full attack, as there is no quick way to detect Darkside
So if you want to check for Darkside, just run directly MF1_DARKSIDE_ACQUIRE.
Philippe Teuwen