diff --git a/examples/simple_repeater/MyMesh.cpp b/examples/simple_repeater/MyMesh.cpp
index f57de659e..8502834c7 100644
--- a/examples/simple_repeater/MyMesh.cpp
+++ b/examples/simple_repeater/MyMesh.cpp
@@ -1465,5 +1465,6 @@ bool MyMesh::hasPendingWork() const {
   if (bridge.isRunning()) return true;  // bridge needs WiFi radio, can't sleep
 #endif
   if (radio_driver.isWatchdogObserving()) return true;  // keep MCU awake for one radio duty cycle
+  if (radio_driver.isCalibratingNoiseFloor()) return true;  // keep MCU awake for the noise-floor window
   return _mgr->getOutboundTotal() > 0;
 }
diff --git a/examples/simple_room_server/MyMesh.cpp b/examples/simple_room_server/MyMesh.cpp
index 43f479a00..779628636 100644
--- a/examples/simple_room_server/MyMesh.cpp
+++ b/examples/simple_room_server/MyMesh.cpp
@@ -1050,5 +1050,6 @@ bool MyMesh::hasPendingWork() const {
   if (bridge.isRunning()) return true; // bridge needs WiFi radio, can't sleep
 #endif
   if (radio_driver.isWatchdogObserving()) return true; // keep MCU awake for one radio duty cycle
+  if (radio_driver.isCalibratingNoiseFloor()) return true; // keep MCU awake for the noise-floor window
   return _mgr->getOutboundTotal() > 0;
 }
diff --git a/src/helpers/radiolib/CustomLR1110Wrapper.h b/src/helpers/radiolib/CustomLR1110Wrapper.h
index 56aec8be6..5482d7df0 100644
--- a/src/helpers/radiolib/CustomLR1110Wrapper.h
+++ b/src/helpers/radiolib/CustomLR1110Wrapper.h
@@ -43,7 +43,9 @@ protected:
       // reconfiguring the radio
       stopReceiveDutyCycle();
     }
-    if (!_rx_ps_enabled) {
+    if (!_rx_ps_enabled || _nf_calib_active) {
+      // plain continuous RX: powersaving off, or a periodic noise-floor
+      // calibration window is in progress
       return _radio->startReceive();
     }
 
diff --git a/src/helpers/radiolib/CustomSX1262Wrapper.h b/src/helpers/radiolib/CustomSX1262Wrapper.h
index b1b9ce577..eb8c3980d 100644
--- a/src/helpers/radiolib/CustomSX1262Wrapper.h
+++ b/src/helpers/radiolib/CustomSX1262Wrapper.h
@@ -52,7 +52,9 @@ protected:
       // silently abort the RX we are about to start
       stopReceiveDutyCycle();
     }
-    if (!_rx_ps_enabled) {
+    if (!_rx_ps_enabled || _nf_calib_active) {
+      // plain continuous RX: powersaving off, or a periodic noise-floor
+      // calibration window is in progress
       return _radio->startReceive();
     }
 
diff --git a/src/helpers/radiolib/RadioLibWrappers.cpp b/src/helpers/radiolib/RadioLibWrappers.cpp
index 082be0073..86c71086c 100644
--- a/src/helpers/radiolib/RadioLibWrappers.cpp
+++ b/src/helpers/radiolib/RadioLibWrappers.cpp
@@ -11,6 +11,11 @@
 #define NUM_NOISE_FLOOR_SAMPLES  64
 #define SAMPLING_THRESHOLD  14
 
+// periodic noise-floor calibration windows (RX duty-cycle powersaving only)
+#define NF_CALIB_INTERVAL_MS  60000UL   // at least once a minute
+#define NF_CALIB_TIMEOUT_MS   5000UL    // give up on the batch (busy channel)
+#define NF_CALIB_SETTLE_MS    20UL      // frontend/AGC settle after RX entry
+
 static volatile uint8_t state = STATE_IDLE;
 
 // this function is called when a complete packet
@@ -158,16 +163,60 @@ void RadioLibWrapper::rxPsWatchdogCheck() {
   }
 }
 
+// Periodic noise-floor calibration, active only with RX duty-cycle powersaving:
+// a duty-cycled receiver can't be sampled reliably (the frontend is off in the
+// sleep windows and settling right after each wake), so at least once a minute
+// the receive mode is dropped to plain continuous RX, a fresh sample batch is
+// collected exactly like the non-powersaving path does, and the duty cycle is
+// re-armed. The published average stays in _noise_floor as usual.
+void RadioLibWrapper::noiseFloorCalibCheck() {
+  unsigned long now = millis();
+  if (_nf_calib_active) {
+    if (!_rx_ps_enabled || (long)(now - _nf_calib_deadline) >= 0) {
+      // powersaving turned off mid-window, or the batch couldn't complete
+      // (busy channel / stuck filter) - keep the previous floor
+      endNoiseFloorCalib(now);
+    }
+  } else if (_rx_ps_enabled && _rx_ps_armed && state == STATE_RX
+             && now - _nf_last_calib >= NF_CALIB_INTERVAL_MS
+             && !isReceivingPacket()) {
+    // never interrupt an ongoing reception to calibrate (a TX in flight is
+    // already excluded by state == STATE_RX); retries next loop iteration
+    _nf_calib_active = true;
+    _nf_calib_deadline = now + NF_CALIB_TIMEOUT_MS;
+    _nf_sample_from = now + NF_CALIB_SETTLE_MS;
+    _num_floor_samples = 0;   // start a fresh batch for this window
+    _floor_sample_sum = 0;
+    state = STATE_IDLE;   // recvRaw() re-arms; startReceiveMode() sees the
+                          // active flag and starts continuous RX, not duty-cycle
+  }
+}
+
+void RadioLibWrapper::endNoiseFloorCalib(unsigned long now) {
+  _nf_calib_active = false;
+  _nf_last_calib = now;
+  // force a receive re-arm back into duty-cycle mode, but don't clobber a
+  // completed-but-unread packet or an in-flight TX (recvRaw()/onSendFinished()
+  // will re-arm right after those anyway; same guard style as setRxPowerSaving)
+  if ((state & STATE_INT_READY) == 0 && (state & ~STATE_INT_READY) != STATE_TX_WAIT) {
+    state = STATE_IDLE;
+  }
+}
+
 void RadioLibWrapper::loop() {
   if (_rx_ps_enabled) {
     rxPsWatchdogCheck();
   }
+  noiseFloorCalibCheck();
 
   if (state == STATE_RX && _num_floor_samples < NUM_NOISE_FLOOR_SAMPLES) {
-    // In RX duty-cycle (powersaving) mode only sample while the chip is in a
-    // listen window: during the sleep window the frontend is off, so the RSSI
-    // is meaningless and the SPI read would stall until the next window.
-    if (!(_rx_ps_armed && isChipBusy()) && !isReceivingPacket()) {
+    // Noise floor is only sampled outside RX duty-cycle mode: continuously in
+    // plain RX (powersaving off), or inside the periodic calibration window
+    // (powersaving on), skipping the first moments after RX entry there while
+    // the frontend/AGC settles (unsettled GetRssiInst reads ~-127 dBm garbage).
+    if (!_rx_ps_armed
+        && !(_nf_calib_active && (long)(millis() - _nf_sample_from) < 0)
+        && !isReceivingPacket()) {
       int rssi = getCurrentRSSI();
       if (rssi < _noise_floor + SAMPLING_THRESHOLD) {  // only consider samples below current floor + sampling THRESHOLD
         _num_floor_samples++;
@@ -182,6 +231,10 @@ void RadioLibWrapper::loop() {
     _floor_sample_sum = 0;
 
     MESH_DEBUG_PRINTLN("RadioLibWrapper: noise_floor = %d", (int)_noise_floor);
+
+    if (_nf_calib_active) {
+      endNoiseFloorCalib(millis());   // fresh floor published - back to duty cycle
+    }
   }
 }
 
diff --git a/src/helpers/radiolib/RadioLibWrappers.h b/src/helpers/radiolib/RadioLibWrappers.h
index 3f226ebb4..54b824795 100644
--- a/src/helpers/radiolib/RadioLibWrappers.h
+++ b/src/helpers/radiolib/RadioLibWrappers.h
@@ -48,9 +48,21 @@ protected:
   int8_t _cur_dbm;
   bool _params_valid, _dbm_valid;
 
+  // Periodic noise-floor calibration (only while RX duty-cycle powersaving is
+  // armed): a duty-cycled receiver can't be sampled reliably, so at least once
+  // a minute the wrapper drops to plain continuous RX, collects a fresh sample
+  // batch exactly like the non-powersaving path does, publishes the average
+  // into _noise_floor and re-arms the duty cycle.
+  bool _nf_calib_active;
+  unsigned long _nf_last_calib;       // millis of last completed/attempted window
+  unsigned long _nf_calib_deadline;   // abort window if the batch can't complete
+  unsigned long _nf_sample_from;      // no samples before this (RX entry settle)
+
   void idle();
   void startRecv();
   void rxPsWatchdogCheck();
+  void noiseFloorCalibCheck();
+  void endNoiseFloorCalib(unsigned long now);
   void cacheParams(float freq, float bw, uint8_t sf, uint8_t cr) {
     _cur_freq = freq; _cur_bw = bw; _cur_sf = sf; _cur_cr = cr; _params_valid = true;
   }
@@ -73,7 +85,9 @@ public:
         _rx_ps_rx_us(RX_PS_FALLBACK_RX_US), _rx_ps_sleep_us(RX_PS_FALLBACK_SLEEP_US),
         _wd_last_busy(false), _wd_stage(0), _wd_strikes(0), _startrx_fails(0), _wd_last_transition(0),
         _wd_stuck_thresh(0), _wd_observe_until(0), _wd_observe_ms(0),
-        _params_valid(false), _dbm_valid(false) { n_recv = n_sent = n_recv_errors = n_wd_soft = n_wd_hard = 0; }
+        _params_valid(false), _dbm_valid(false),
+        _nf_calib_active(false), _nf_last_calib(0), _nf_calib_deadline(0), _nf_sample_from(0)
+        { n_recv = n_sent = n_recv_errors = n_wd_soft = n_wd_hard = 0; }
 
   void begin() override;
   virtual void powerOff() { _radio->sleep(); }
@@ -117,6 +131,10 @@ public:
   // true while the watchdog is actively watching for BUSY transitions; used by
   // the app's hasPendingWork() to keep the MCU out of light sleep for the window
   bool isWatchdogObserving() const { return _wd_observe_until != 0; }
+  // true while a periodic noise-floor calibration window is in progress; the
+  // app's hasPendingWork() must keep the MCU awake so the sample batch and the
+  // return to duty-cycle complete promptly
+  bool isCalibratingNoiseFloor() const { return _nf_calib_active; }
   void resetStats() { n_recv = n_sent = n_recv_errors = 0; }
 
   virtual float getLastRSSI() const override;