Add saved node and region discovery response switches

docs/cli_command_availability.md

@@ -150,6 +150,7 @@ should use command `0x42`. See [Companion radio binary protocol](companion_proto
 | Neighbors | [`neighbors`](cli_commands.md#list-nearby-neighbors) | Role with a neighbor table | Yes | Yes | Yes |
 | Neighbors | [`neighbor.remove [pubkey_prefix]`](cli_commands.md#remove-a-neighbor) | Role with a mutable neighbor table; omit prefix to clear all | Yes | Yes | Yes |
 | Neighbors | [`discover.neighbors`](cli_commands.md#discover-zero-hop-neighbors) | Repeater; some MQTT room servers | Yes | Yes | Yes |
+| Neighbors | [`get/set discovery.node.responses`; `get/set discovery.region.responses`](cli_commands.md#enable-or-disable-discovery-responses) | Repeater only; newer source, not published 1.18.0.1 binaries; saved, default on, no reboot | Yes | Yes | Yes |
 | Neighbors | [`discover.scopes`](cli_commands.md#discover-neighbor-scopes-mqtt-observer-neighbors-feature) | MQTT observer with compiled neighbor support | No | No | No |
 | Statistics | [`clear stats`](cli_commands.md#clear-stats) | All full-parser text CLI roles | Yes | Yes | Yes |
 | Statistics | [`stats-core`](cli_commands.md#stats-core) | Local connection | Local | Local | Local |
@@ -325,6 +326,7 @@ should use command `0x42`. See [Companion radio binary protocol](companion_proto
 | Neighbors | [`neighbors`](cli_commands.md#list-nearby-neighbors) | Role with a neighbor table | Yes | Yes | Yes | Yes | Yes |
 | Neighbors | [`neighbor.remove [pubkey_prefix]`](cli_commands.md#remove-a-neighbor) | Role with a mutable neighbor table; omit prefix to clear all | Yes | Yes | Yes | Yes | Yes |
 | Neighbors | [`discover.neighbors`](cli_commands.md#discover-zero-hop-neighbors) | Repeater; some MQTT room servers | Yes | Yes | Yes | Yes | Yes |
+| Neighbors | [`get/set discovery.node.responses`; `get/set discovery.region.responses`](cli_commands.md#enable-or-disable-discovery-responses) | Repeater only; newer source, not published 1.18.0.1 binaries; saved, default on, no reboot | Yes | Yes | Yes | Yes | Yes |
 | Neighbors | [`discover.scopes`](cli_commands.md#discover-neighbor-scopes-mqtt-observer-neighbors-feature) | MQTT observer with compiled neighbor support | No | No | No | Feature | No |
 | Statistics | [`clear stats`](cli_commands.md#clear-stats) | Full parser | Yes | Yes | Yes | Yes | Yes |
 | Statistics | [`stats-core`](cli_commands.md#stats-core) | Local connection | Local | Local | Local | Local | Local |

docs/cli_commands.md

@@ -636,6 +636,44 @@ require MQTT or PSRAM.
 
 ---
 
+### Enable or disable discovery responses
+
+**Availability:** Repeater firmware in newer source builds. These switches are
+not included in the existing published **1.18.0.1** binaries. They do not require
+MQTT or PSRAM and are not Companion, Room Server, or Sensor settings.
+
+```text
+get discovery.node.responses
+set discovery.node.responses on
+set discovery.node.responses off
+get discovery.region.responses
+set discovery.region.responses on
+set discovery.region.responses off
+```
+
+| Setting | Default | What `off` does |
+| --- | --- | --- |
+| `discovery.node.responses` | `on` | Stops replies to normal zero-hop node-discovery requests. |
+| `discovery.region.responses` | `on` | Stops replies to anonymous region/scope queries, even while adverts remain enabled. |
+
+The two choices are independent. They apply immediately after a successful
+save and survive reboot; no reboot is needed. Fresh installations and upgrades
+without saved choices keep both on, preserving the previous behavior. Use a
+local console or authenticated administrator CLI to change them.
+
+Enabling node responses still honors the existing hidden-node rule: when both
+`advert.interval` and `flood.advert.interval` are `0`, the repeater does not
+answer normal discovery requests. Enabling a response switch also retains the
+normal request-validation and rate limits.
+
+These switches do not stop the node's own adverts, outgoing
+`discover.neighbors` or `discover.scopes` commands, or automatic
+[MQTT neighbor discovery](#view-or-change-periodic-neighbors-publishing-mqtt-observer-neighbors-feature).
+They do not restrict an authorized administrator's `region` CLI commands.
+Use `set mqtt.neighbors off` to stop the periodic outgoing MQTT discovery pass.
+
+---
+
 ### Discover neighbor scopes (MQTT observer, neighbors feature)
 
 Refreshes the zero-hop neighbor table, then queries each neighbor for its region
@@ -649,6 +687,10 @@ scopes and publishes the assembled table to the MQTT `neighbors` topic once.
 Elsewhere it replies `Err - neighbors not enabled in this build`. If a
 `discover.neighbors` refresh is already in flight, the scope pass is queued behind it.
 
+This is an outgoing query. A repeater's separate
+[discovery response switches](#enable-or-disable-discovery-responses) control
+whether that repeater answers other nodes' requests.
+
 ---
 
 ## Statistics
@@ -6399,6 +6441,12 @@ default-off updates keep the existing record size.
 > While enabled, `get mqtt.status` gains a trailing `nbr: <next>/<last>` field
 > (time to next publish, and how the last publish went).
 
+This setting controls this node's outgoing periodic discovery and MQTT
+publication. It does not control replies to requests from other nodes. Newer
+repeater source builds have separate
+[node and region response switches](#enable-or-disable-discovery-responses),
+both defaulting to on; those switches are not in the published 1.18.0.1 images.
+
 ---
 
 #### View or change the neighbors publish interval (MQTT observer, neighbors feature)