diff --git a/docs/test-results/t1000_usb_bluetooth_priority_2026-10-20.md b/docs/test-results/t1000_usb_bluetooth_priority_2026-10-20.md new file mode 100644 index 000000000..3215bbfca --- /dev/null +++ b/docs/test-results/t1000_usb_bluetooth_priority_2026-10-20.md @@ -0,0 +1,50 @@ + +

View this page on MeshCore Docs.

+ + +# T1000-E USB priority, 20 October 2026 + +Source: `ac0daf3cef31a13163d469c1fd538c06708fe05a`. + +T1000-E Companions now stop Bluetooth advertising and disconnect the Bluetooth +client whenever a USB data host is enumerated. This implements the requested +USB-priority policy after the [simultaneous USB/BLE investigation](companion_qualification_f807_followup_2026-10-19.md) +did not establish a reliable coexistence fix. + +USB priority does not depend on an open serial application or DTR. A charge-only +supply does not acquire priority. Bluetooth is requested again after the data +host has been absent for 500 ms, preserving manual-off and wireless controls. +The policy does not change saved preferences, pairing credentials or identity. +It applies to the T1000-E Bluetooth and Full Companion recipes. + +| Check | Result | +| --- | --- | +| Full Companion build, capability markers, runtime RAM and application-only image bounds | PASS | +| Bluetooth Companion build, capability markers and application-only image bounds | PASS | +| Priority, startup/wake, manual controls, reply routes, bus-reset hold and timer wrap | Six host tests PASS | +| Existing Bluetooth preference/CLI and wireless control tests | Eleven host tests PASS | +| nRF52 BLE regressions, including late connect after disable | 42 tests OK; eight emulator-dependent tests skipped | +| Contact-stream concurrency | Two host tests PASS | +| Hosted documentation links | Seven Python tests and JavaScript checks PASS | +| Install Full on the exact Pi-connected T1000-E | PASS; application only, identity unchanged | +| USB runtime and saved on/off commands while paused | PASS; status reports `bluetooth off (USB data connected)` | +| Saved on during USB priority | PASS; command acknowledges saved on while remaining paused | +| Twenty-second BLE scan with USB enumerated and serial handles closed | Zero target events among 100 scan callbacks | +| Post-test USB readback | PASS; same identity/version, zero core flags, zero recorded crashes | +| Physical unplug, BLE recovery and reconnect qualification on this build | Pending user unplug | +| USB insertion during an established BLE session | Host regression covered; hardware check pending | +| Charge-only and cold-boot behavior on this build | Host policy covered; hardware checks pending | + +The installed version is +`v1.18.0.1-halo-keymind-cascade-dev-ac0daf3c (Build: 20-Oct-2026)`. +Its application ZIP SHA-256 is +`64e09ff2eb8b5e3228f656c7ea99b000c053736b8a020b7eab1429b4d00ab43f`. +The bootloader and SoftDevice were not changed. All opened USB ports were +closed, with no framing rejects in the recorded runtime checks. The original +saved-on Bluetooth choice was restored after the temporary on/off test. + +This verifies USB-priority behavior, not simultaneous active USB/BLE, complete +T1000-E feature qualification or qualification of the other campaign boards. +Historical battery and wall-power passes belong to their original builds. +[Safe evidence summary](t1000_usb_bluetooth_priority_2026-10-20.safe.json) +records the current source and artifact bindings. diff --git a/docs/test-results/t1000_usb_bluetooth_priority_2026-10-20.safe.json b/docs/test-results/t1000_usb_bluetooth_priority_2026-10-20.safe.json new file mode 100644 index 000000000..7f2496730 --- /dev/null +++ b/docs/test-results/t1000_usb_bluetooth_priority_2026-10-20.safe.json @@ -0,0 +1,107 @@ +{ + "schema": 1, + "source_commit": "ac0daf3cef31a13163d469c1fd538c06708fe05a", + "installed_version": "v1.18.0.1-halo-keymind-cascade-dev-ac0daf3c (Build: 20-Oct-2026)", + "application_zip_sha256": "64e09ff2eb8b5e3228f656c7ea99b000c053736b8a020b7eab1429b4d00ab43f", + "capabilities_sha256": "c49a92cb5626f7c871c50de1debb74cca2a482d04949443c2e7d489d03c1d018", + "source_modified": false, + "policy_scope": "T1000-E Bluetooth and Full Companions only; enumerated USB host priority", + "simultaneous_usb_ble_qualified": false, + "full_feature_qualified": false, + "installation": { + "passed": true, + "application_only": true, + "bootloader_or_softdevice_changed": false, + "public_identity_unchanged": true + }, + "usb_priority": { + "source_commit": "ac0daf3cef31a13163d469c1fd538c06708fe05a", + "artifact_sha256": "64e09ff2eb8b5e3228f656c7ea99b000c053736b8a020b7eab1429b4d00ab43f", + "usb_replies": [ + { + "command": "get bluetooth", + "reply": "bluetooth off (USB data connected)" + }, + { + "command": "set bluetooth on", + "reply": "OK - Bluetooth on (saved); paused while USB data is connected" + }, + { + "command": "get bluetooth", + "reply": "bluetooth off (USB data connected)" + }, + { + "command": "set bluetooth off", + "reply": "OK - Bluetooth already off (saved)" + }, + { + "command": "get bluetooth", + "reply": "bluetooth off (USB data connected)" + }, + { + "command": "set bluetooth on", + "reply": "OK - Bluetooth on (saved); paused while USB data is connected" + }, + { + "command": "get bluetooth", + "reply": "bluetooth off (USB data connected)" + } + ], + "serial_closed_during_scan": true, + "scan": { + "seconds": 20, + "target_events": 0, + "all_events": 100 + }, + "transport": { + "ports_opened": 1, + "ports_closed": 1, + "request_frames_sent": 14, + "response_frames_received": 15, + "request_bytes_sent": 280, + "response_payload_bytes": 713, + "discarded_prefix_bytes": 0, + "invalid_length_candidates": 0, + "ignored_push_frames": 1 + }, + "after": { + "version": "v1.18.0.1-halo-keymind-cascade-dev-ac0daf3c (Build: 20-Oct-2026)", + "core": { + "battery_mv": 4195, + "uptime_seconds": 84, + "error_flags": 0, + "outbound_queue_length": 0 + }, + "mcu_regulator": "> auto; active dcdc; fallback off; crashes 0; recovery on", + "public_identity_sha256": "8fc05b145d174bfbebe27978ed580c49bee90b3c1e2d3678108bfc30c38980d9", + "transport": { + "ports_opened": 1, + "ports_closed": 1, + "request_frames_sent": 5, + "response_frames_received": 5, + "request_bytes_sent": 77, + "response_payload_bytes": 288, + "discarded_prefix_bytes": 0, + "invalid_length_candidates": 0, + "ignored_push_frames": 0 + } + }, + "passed": true + }, + "remaining_hardware_checks": [ + "physical_unplug_ble_recovery", + "usb_insertion_during_connected_ble", + "charge_only", + "cold_boot" + ], + "evidence_sha256": { + "usb-priority-usb.safe.json": "a369e9e3f586b3d63d9ea2601594a8ae7566efd3d2cbfd124e7e0ba9b936975c", + "usb-priority-install.safe.json": "5c434448f7a926eca903c22a561b296c176c5e69d472d99ee7c70341a3a64930", + "usb-priority-head-build.private.log": "e6fbcee54674eaed9a307d931d34cd51fe4926fb90ec8350a3330efe5bb9db22", + "usb-priority-ble-build.private.log": "688f406e7bfcf481768dc477232e7c1580333a80afd98afa3866d8bdfa9e5fb5" + }, + "privacy": { + "raw_usb_or_ble_addresses": false, + "device_secrets_or_payloads": false + } +}