diff --git a/docs/test-results/v4_mqtt_bellevue_g2_2026-10-21.md b/docs/test-results/v4_mqtt_bellevue_g2_2026-10-21.md new file mode 100644 index 000000000..1edba9393 --- /dev/null +++ b/docs/test-results/v4_mqtt_bellevue_g2_2026-10-21.md @@ -0,0 +1,72 @@ + +

View this page on MeshCore Docs.

+ + +# V4 MQTT setup and Bellevue G2 Full Repeater, 21 October 2026 + +Status: **PASS for the requested setup and deployment**. The Mercerwood V4 +is left connected to its saved US analyzer MQTT preset. Bellevue's Station G2 +now runs the current Full Repeater application, with repeating enabled and its +USB gateway service restored. No firmware source change was needed. + +## V4 MQTT + +The V4 retains its measured `2bd4cb4d` Full Companion application. Its saved +MQTT switch was already on, while WiFi was off and the MQTT region was empty. +The setup saved region `SEA`, enabled the existing WiFi configuration and kept +the `analyzer-us` preset. This preset uses WSS and device-signed JWT +authentication. WiFi and admin passwords were not changed. + +The first connection obtained two broker PUBACKs. A subsequent 137.367-second +held observation recorded PUBACK growth from 3 to 5, uptime from 29,881 to +30,017 seconds, zero core errors and empty core queues. Every sample had an +empty MQTT outbox and zero queue/drop counters. Free DMA memory stayed at +50,056 bytes or more, with a largest block of 49,140 bytes. + +The one-minute test status interval was restored to its original five minutes. +That setting restarts the MQTT worker; a separate final check confirmed WiFi, +MQTT and a new broker acknowledgment after the restart. WiFi and MQTT remain +enabled. Other saved broker slots and radio settings were not changed. + +PUBACK verifies that the broker accepted a publication. An independent +subscriber payload receipt was not measured because no subscriber account was +available. This finite observation does not replace a long-duration WSS soak. + +## Bellevue Station G2 + +| Item | Result | +| --- | --- | +| Canonical target | `Station_G2_repeater_observer_mqtt`, built through the Full release profile | +| Installed version | `v1.18.0.1-halo-keymind-cascade-dev-observer-a926341f` | +| Application body / target | `4233FACEB6C44EAE` / `DBB6A855` | +| Application SHA256 | `459f2e1de20460b54ac00cd545dfe11490b13081072c3aed47b1398dd276dcf5` | +| Build gates | Full capability and memory gates passed; 200,432 available internal bytes versus 192,656 required heap bytes | +| Installation | Actual ESP32-S3 identity and 16 MiB layout verified; CRC-valid OTA metadata selected the active slot at `0x650000`, size `0x640000` | +| Readback | All 2,118,264 application bytes verified; partition table, OTA metadata and NVS hashes unchanged during the write | +| Persistence | Original public identity, name, radio, TX power, WiFi SSID, MQTT settings and power-saving choice preserved | +| Repeater mode | Role-specific getter accepted; repeating was already on and remains on | +| Final health | Core errors 0, outbound queue 0; local packet counters showed 84 received and 18 sent | +| Service handback | Original `mctomqtt.service` is active and again owns the exact G2 USB endpoint | + +The combined Full recipe retains `observer` in its version string and includes +the repeater implementation, MQTT, ESP-NOW, USB logging, WiFi OTA and LoRa OTA. +The build's Full overlay enables the LoRa update path. Saved operating settings +remain 910.525 MHz / BW62.5 / SF7 / CR5 and TX 19 dBm. + +The application-only update preserved the existing expanded layout. It made no +whole-chip erase or full-flash backup. Small protected NVS reads were hashed +and removed; after boot, saved logical settings and the full public identity +were independently compared with the original observations. + +The first postboot check had zero core errors and one in-flight radio packet +at uptime 13 seconds. The initial harness required an immediately empty queue +and stopped handback at that check. A bounded follow-up on the same installed +firmware verified the exact version, body, identity and repeater role, then +recorded an empty queue with zero errors at uptime 149 seconds and restored +the original USB gateway. That early failed gate is retained in the evidence; +no second firmware installation was performed. + +The [safe receipt](v4_mqtt_bellevue_g2_2026-10-21.safe.json) records artifact +bindings, timings and evidence hashes. The local packet counters demonstrate +observed radio activity; independent peer delivery, RF range, physical OTA +installation and long-duration behavior were not tested in this deployment. diff --git a/docs/test-results/v4_mqtt_bellevue_g2_2026-10-21.safe.json b/docs/test-results/v4_mqtt_bellevue_g2_2026-10-21.safe.json new file mode 100644 index 000000000..e623cce14 --- /dev/null +++ b/docs/test-results/v4_mqtt_bellevue_g2_2026-10-21.safe.json @@ -0,0 +1,211 @@ +{ + "schema": 1, + "report_date": "2026-10-21", + "status": "PASS", + "scope": "Requested V4 MQTT setup and Bellevue Station G2 Full Repeater installation; source-bound finite runtime checks, preserving saved configuration.", + "v4": { + "schema": 1, + "status": "PASS", + "device": "Heltec V4.3 OLED", + "firmware_source": "2bd4cb4d119ce4d588b91a3aa9cfda507e188c13", + "firmware_reflashed": false, + "saved_configuration": { + "wifi_enabled": true, + "mqtt_enabled": true, + "slot1_preset": "analyzer-us", + "transport": "WSS with existing device-signed JWT authentication", + "region_iata": "SEA", + "report_interval_minutes": 5, + "wifi_password_changed": false, + "admin_password_changed": false, + "other_saved_broker_slots_changed": false, + "radio_settings_changed": false + }, + "measurements": { + "connected_with_broker_PUBACK": true, + "setup_pub_ack": 2, + "stability_started_at": "2026-10-21T15:49:59.562699+00:00", + "stability_finished_at": "2026-10-21T15:52:16.929845+00:00", + "stability_elapsed_seconds": 137.367146, + "pub_ack_before": 3, + "pub_ack_after": 5, + "uptime_before": 29881, + "uptime_after": 30017, + "all_core_errors_zero": true, + "all_core_queues_zero": true, + "all_mqtt_outboxes_zero": true, + "all_mqtt_drops_zero": true, + "DMA_free_bytes": [ + [ + 50064, + 49140 + ], + [ + 50064, + 49140 + ], + [ + 50056, + 49140 + ], + [ + 50060, + 49140 + ], + [ + 50056, + 49140 + ], + [ + 50064, + 49140 + ] + ], + "final_reconnect_after_restoring_5min_interval_pub_ack": 1 + }, + "limits": [ + "Broker acknowledgments confirm accepted publications; independent subscriber payload receipt was not measured", + "The held observation is finite, not a long-duration soak", + "Slot2 analyzer-eu remains saved; its connectivity is not claimed" + ], + "evidence_sha256": { + "v4-initial.private.json": "799ce0686dfaf31e9b5d3a0b5452782307cca1dd4bd166f5a96f4cc117ae3ac0", + "v4-config-before.private.json": "beb2e22068855f6bb191ceed9040552a4958c942c81017ac97f7b2821b1c2b04", + "v4-mqtt-setup.private.json": "435d3d64c912cee42055cede3f57898713f442683af9de9c47a5a94af165e3de", + "v4-mqtt-observe.private.json": "03512b2b5a53fce3049e4d05814b31e722628d2f0f328079f63c03f14eee3390", + "v4-mqtt-finish.private.json": "59ac5a0b47733de6fae4031d15e4af347ec4ab5941369d9b672d0d28653d4a48", + "v4-final-handoff.private.json": "178a1ce9daa2aa9b4c2f518b19270ac2834609f358de7fefcf23b1e8c00238ca" + } + }, + "g2": { + "status": "PASS", + "board": "Station G2", + "target": "Station_G2_repeater_observer_mqtt", + "source_commit": "a926341f53f25895c1b827e7a9ded3fe3948707e", + "runtime_version": "v1.18.0.1-halo-keymind-cascade-dev-observer-a926341f", + "body_hash": "4233FACEB6C44EAE", + "target_id": "DBB6A855", + "application_sha256": "459f2e1de20460b54ac00cd545dfe11490b13081072c3aed47b1398dd276dcf5", + "application_bytes": 2118264, + "build": { + "passed": true, + "profile": "full", + "available_internal_bytes": 200432, + "required_heap_bytes": 192656, + "required_contiguous_bytes": 21184, + "verified_capabilities": [ + "bridge.espnow", + "profile.full", + "release.full.same_partition_successor", + "ota.update.wifi", + "ota.update.lora", + "cli.retry_preset", + "telemetry.history", + "ota.cli", + "web.webconfig", + "logging.usb.packets", + "logging.usb.control", + "logging.usb.output" + ], + "physical_OTA_install_tested_this_task": false + }, + "installation": { + "method": "USB active-application-slot update via identity-bound real flasher session", + "application_address": 6619136, + "slot_size": 6553600, + "flash_bytes": 16777216, + "CRC_valid_active_OTA_selection": true, + "full_application_readback_verified": true, + "partition_table_unchanged_during_write": true, + "OTA_metadata_unchanged_during_write": true, + "NVS_hashes_unchanged_during_write": true, + "whole_flash_erased": false, + "full_flash_backup_created": false, + "finished_before_runtime_check": "2026-10-21T16:13:57.046009+00:00" + }, + "handback": { + "repeater_role_verified": true, + "repeat_on": true, + "repeating_setting_changed": false, + "persisted_public_identity_preserved": true, + "saved_settings_preserved": [ + "radio", + "TX power", + "name", + "WiFi SSID", + "MQTT region", + "MQTT slot1 preset", + "MQTT enabled", + "power saving" + ], + "radio_MHz": 910.5250244, + "bandwidth_kHz": 62.5, + "SF": 7, + "CR": 5, + "TX_dBm": 19, + "gateway_service": "mctomqtt.service", + "gateway_active_and_owns_exact_USB_radio": true, + "finished_at": "2026-10-21T16:16:16.796932+00:00", + "core": { + "battery_mv": 0, + "uptime_secs": 149, + "errors": 0, + "queue_len": 0 + }, + "local_packet_counters": { + "recv": 84, + "sent": 18, + "flood_tx": 17, + "direct_tx": 1, + "flood_rx": 84, + "direct_rx": 0, + "recv_errors": 53 + } + }, + "history": { + "preinstall_version": "v1.17.1.9-halo-keymind-cascade-dev-observer-88c85108 (Build: 07-Oct-2026)", + "preinstall_core": { + "battery_mv": 0, + "uptime_secs": 514679, + "errors": 2, + "queue_len": 0 + }, + "initial_postboot_core": { + "battery_mv": 0, + "uptime_secs": 13, + "errors": 0, + "queue_len": 1 + }, + "initial_gate": "First updater required an immediately empty queue and stopped handback when one in-flight packet was present; core errors were zero.", + "followup": "Same installed firmware, exact role/identity/body check and bounded queue settling; final core errors and queue zero; original service restored. No second flash." + }, + "evidence_sha256": { + "g2-repeater-mode.private.json": "33bd01887f37976ae57625cc38bed19f4d1b67ceefb138d48a923d6540448007", + "g2-update.private.json": "d5fdd68a7c4b69490e044bb13382aecff6bfac165533667f60a872279c1cb422", + "esptool5-toolchain.safe.json": "b1aa669f926122c685da2bd3b913ce5293b3b032766509abebe5a2a5817a4d0a", + "g2-preflight-maintenance.private.json": "bc64ad47f4f91d083586ea60ea5bf8cce9752eaa64a42aa15127595f9fa19ad7", + "g2-post-update-runtime.private.json": "cadcd09599d017796f6cc40cb806c28b6d876020ebdabab16cfce1521bda9a83", + "g2-initial.private.json": "58ff2cb0cd0cf1c265a443f6e8998512e2dee09f6309465583514ae70134b934", + "g2-app-only.5PDUMy/otadata-before.bin": "062f79dd9748aef0e56afddd5db3112af00549478e9d478e38137d5f3232f3a3", + "g2-app-only.5PDUMy/readback-validation.log": "4a23e7cd0007c14ffa1315243d874da297c8f5d07f4691084a77b5f532020a68", + "g2-app-only.5PDUMy/inputs.json": "c465b370c19591754661313afd5c175c9c5a951071101517561051083a027bb9", + "g2-app-only.5PDUMy/chip-id.log": "4fbc18754870b54011aa466f2d745f41cdf8a3abe625ad21c61267c97891f085", + "g2-app-only.5PDUMy/otadata-after.bin": "062f79dd9748aef0e56afddd5db3112af00549478e9d478e38137d5f3232f3a3", + "g2-app-only.5PDUMy/table-after.bin": "9af3af2b74e944337ba85f2b0027ee80df160579a1ab746ba0f95853f618cd60", + "g2-app-only.5PDUMy/flash-id.log": "7081b077e1d870cac28a1f27a1718d7cc478d77d16c71aaef09bde9925dabaf7", + "g2-app-only.5PDUMy/finish.log": "bf1313b4bcf482b65afac381e7023e6ce4deb2a1fcbb139a434166053ee7d898", + "g2-app-only.5PDUMy/receipt.safe.json": "18ff87dc1063d858b273084d398feb1ac0fe003ee0fe9a30073e9573347a024b", + "g2-app-only.5PDUMy/protected-after-hashes.json": "0d26cc446d400d03279716e6724cb265fd27cbb78031c35dfe9a5a4b14a08c79", + "g2-app-only.5PDUMy/write.log": "d9cd5efaa91bafbf271380ab0eac5124f27393e482fe87596fdf21b3734560b3", + "g2-app-only.5PDUMy/protected-hashes.json": "73679b17f25c18d20608835e8a689ab4e2d536f32d8888cb1ff3ab368166c264", + "g2-app-only.5PDUMy/table-before.bin": "9af3af2b74e944337ba85f2b0027ee80df160579a1ab746ba0f95853f618cd60" + }, + "limits": [ + "Local radio counters establish observed activity, not independent peer delivery or RF range", + "No physical WiFi/LoRa OTA installation, long-duration load or power measurements in this task", + "Protected NVS/table/OTA hashes refer to the flash-write interval; saved logical settings and identity were separately compared after boot" + ] + }, + "firmware_source_changed_in_this_task": false, + "other_boards_or_gateway_services_changed": false +}