mikecarper
e896eec430
Add scheduled dual LoRa profiles
...
Support radio2, temporary profiles and one schedule slot per command family. Preserve reply affinity, shared airtime and session expiry with guarded warm switching on SX1262 and LR1110.
Validate native routing, scheduling, persistence and driver failure paths; build Companion, repeater, room and sensor roles on ESP32, nRF52 and STM32.
2026-10-19 18:41:53 -07:00
Scott Powell
07a833bbbe
* version 1.18.0
2026-10-15 19:42:01 +11:00
Scott Powell
f9e70426ae
increased MAX_SEARCH_RESULTS to 24. (was 8)
...
Closes #3243
2026-09-24 13:35:27 +10:00
Scott Powell
bc8ccefafe
* fix for telemHasChanged()
2026-09-14 20:23:10 +10:00
Scott Powell
62d0556a70
* added region load/save support
...
* SUBSCRIBE now with timeout param (default 30 mins, max ~18 hours)
2026-09-05 15:59:29 +10:00
Scott Powell
3a5a6b90ab
* sensor: CLI "sub" and "unsub" commands
2026-09-04 22:02:49 +10:00
Scott Powell
9bc6060831
* new: REQ_TYPE_SUBSCRIBE and REQ_TYPE_UNSUBSCRIBE
2026-09-04 15:13:17 +10:00
Scott Powell
b4e37044ed
* default and reply scopes now applied
2026-09-03 14:09:15 +10:00
Scott Powell
d929643524
* version 1.17.1
2026-08-14 22:19:19 +10:00
Scott Powell
93b2db63de
* version 1.17.0
2026-08-09 15:14:46 +10:00
Wessel Nieboer
7c8e092457
Have CAD be a separate toggle (set cad on/off)
2026-06-14 15:20:58 +02:00
Scott Powell
8c0d5c5b24
* version 1.16.0
2026-06-06 21:09:38 +10:00
Wessel Nieboer
c5bf23f4b1
bump simple_sensor version to v1.15.0
2026-04-30 11:12:31 +02:00
Scott Powell
4131a455a2
* repeater: refactored 'region' CLI commands -> CommonCLI
...
* room server: added RegionMap, and new CommonCLI wiring, default_scope handling
* sensor: only minimal RegionMap wiring. Still needs work to handle default-scope
2026-04-15 13:32:49 +10:00
Scott Powell
467959cc3b
* version 1.14.1
2026-03-20 12:32:41 +11:00
Scott Powell
3fe2dd7f48
* ver 1.14.0
2026-03-06 12:20:04 +11:00
Scott Powell
3e76161e9c
* refactor of Contact/Client out_path_len (stored in files), from signed to unsigned byte (+2 squashed commits)
...
Squashed commits:
[f326e25] * misc
[fa5152e] * new 'path mode' parsing in Dispatcher
2026-02-21 19:35:51 +11:00
Scott Powell
e2571accbe
* ver 1.13.0
2026-02-15 17:24:37 +11:00
Wessel Nieboer
d0720c63c2
Allow negative tx power
...
Like SX1262 allows -9 dBm lowest, some allow lower but that probably
isn't useful
2026-02-06 02:24:51 +01:00
Scott Powell
465776d667
* ver 1.12.0
2026-01-29 21:12:31 +11:00
liamcottle
ed589f9620
boot adverts are now zero hop instead of flood
2026-01-26 22:20:36 +13:00
taco
6336bd5b72
refactor ClientACL and CommonCLI, add ClientACL::clear()
2026-01-25 01:31:53 +11:00
Scott Powell
e054597a18
* ver 1.11.0
2025-11-30 18:32:10 +11:00
ripplebiz
79a036f995
Merge pull request #1131 from wel97459/dev-uint
...
Changed uint used in flags to uint8_t
2025-11-25 21:51:36 +11:00
Scott Powell
0e903de72c
* BUG FIX: same remote login fix as repeater
2025-11-25 15:09:51 +11:00
Winston Lowe
031fa1e704
Changed uint to a uint8_t
2025-11-20 21:58:42 -08:00
Scott Powell
91e9fcea4b
* ver 1.10.0
2025-11-13 20:45:38 +11:00
ripplebiz
ba6b8535c9
Merge pull request #971 from fdlamotte/remove_set_setting_by_key
...
SensorManager: remove setSettingByKey
2025-11-11 23:40:13 +11:00
Florent
90e26129ee
Merge branch 'dev' into remove_set_setting_by_key
2025-11-11 12:23:12 +01:00
Florent
06825030e5
sensor: copy control data code from repeater
2025-11-06 22:36:37 +01:00
Michael Hart
81ab944682
Adds serial commands to get stats
...
- Added formatStatsReply, formatRadioStatsReply, and formatPacketStatsReply methods in MyMesh for both simple_repeater, simple_room_server, and simple_sensor.
- Updated CommonCLI to handle new stats commands.
2025-10-28 23:55:49 -07:00
Florent
37dc715a8e
SensorManager: remove setSettingByKey
2025-10-18 23:37:58 +02:00
Florent de Lamotte
9e3c2fc9d9
gps_cli: gps also restored on sensors and rooms
2025-10-06 15:30:18 +02:00
Scott Powell
8d8b9a6141
* ver 1.9.1
2025-10-02 12:52:19 +10:00
Scott Powell
b92d9bd972
* ver 1.9.0
2025-09-28 19:24:00 +10:00
Scott Powell
281591f147
* refactor: moved ACL out of SensorMesh -> ClientACL
2025-09-12 15:35:31 +10:00
Scott Powell
637891b814
* ver bump
2025-09-01 19:32:15 +10:00
Scott Powell
ee194a7b19
* added CommonCLI::saveIdentity()
2025-09-01 15:22:11 +10:00
Scott Powell
8b3c16c497
* ver bump
2025-08-31 23:42:15 +10:00
Florent
136f733df5
SensorMesh: add the possibility to receive msgs from admin
2025-08-27 21:19:12 +02:00
Scott Powell
28af68c187
* new CommonCLI commands: "get prv.key", "set prv.key {hex}"
2025-08-01 19:28:44 +10:00
Scott Powell
365cb89634
* ver bump to 1.7.4
2025-07-24 20:30:35 +10:00
Scott Powell
ea4aa93594
* CommonCLI: "set radio " now with optional 5th param timeout_mins, for applying temporary radio params for that many mins
...
* "advert" command now with longer delay, so that CLI reply is sent first
2025-07-23 21:40:37 +10:00
Scott Powell
3358783039
* sensor: "setperm {pubkey-hex} 0" command can now remove by partial pubkey
...
* sensor: login with blank password now just checks if sender is in ACL, and returns permissions (if so)
2025-07-16 21:16:05 +10:00
Scott Powell
d15b374c29
* Sensor permission levels renamed. Misc sensor fixes.
2025-07-16 14:18:05 +10:00
Scott Powell
7947e8a2d8
* simple_sensor: redesigned permissions
...
* companion: PUSH_CODE_LOGIN_SUCCESS now has extra byte in frame for ACL permissions
2025-07-15 15:05:38 +10:00
Scott Powell
be68aaed20
* simple_sensor: new REQ_TYPE_GET_ACCESS_LIST
2025-07-13 18:50:52 +10:00
Scott Powell
339ee035aa
* simple_sensor: handleCustomCommand() hook
2025-07-13 15:30:49 +10:00
Scott Powell
0d1b5b17d3
* simple_sensor: added alert send queue, with retries, checks for ACKs, etc. Low pri alerts only 1 send attempt, otherwise 4 attempts
2025-07-12 12:26:16 +10:00
Scott Powell
797ab85283
* sensor node: now have two alert priorities, LO, HI
2025-07-09 15:50:36 +10:00
mikecarper