#54 lands first, so the network abstraction is reworked on top of the
per-slot client ownership model instead of alongside it.
Two resolutions are semantic, not textual:
- Link-transition teardown goes through the ownership API. It called
softDisconnect() on every started client, which bypassed client_state and
ignored the typed result. A slot that is still Starting now gets a real
stop: softDisconnect() returns immediately on a client that is not yet
connected, so its attempt would otherwise complete against the old route and
deliver a CONNECTED event indistinguishable from the new one's (F04). On a
medium switch the old route can still be briefly usable, so that is not
hypothetical. A connected client keeps the cheap bounded path, and a
quarantined one is left alone.
- NetworkLink::applyPowerPrefs() adopts WifiPowerSavePolicy. Its local
`2 ? MAX : NONE` mapping would have reintroduced F11 and read the new stored
value 3 (explicit `min`) as none. It also applies the setting when the link
starts already associated, which is the case the bridge used to cover.
The NTP probe from #54 keeps its validation and its one-attempt-per-server
bound, but resolves and gates on the selected link rather than on WiFi, so it
works on an Ethernet-preferred node.
- The room server checked canFlashAfterStop() only when the bridge was
running at OTA time. After a timed-out restart the bridge reads as
stopped while its unacknowledged task may still own TLS/client state,
so an OTA could erase and write flash under it. It now refuses while
the stop is unproven, after first reaping any late ack. The repeater
already gated unconditionally.
- MyMesh::loop() now reaps a late stop acknowledgement whenever it lands,
releasing the withheld queue and buffers, and restarts only when a
resume is pending and the bridge is enabled. Before, a bridge disabled
during StopUnproven kept those resources until re-enabled or rebooted.
pollLateStopAck() is public for this.
- The wrapper's destructor no longer stops an already-stopped client:
destroySlotClients() had just stopped it, so every shutdown logged five
spurious "esp_mqtt_client_stop failed: ESP_FAIL" errors.
Hardware (Heltec V4, 1 s test stop deadline): restart -> StopUnproven ->
`set bridge.enabled off`; the late ack was reaped ("releasing withheld
resources"), status read "not running", and `set bridge.enabled on`
started cleanly without a second release.
setBridgeState(false) returned early when the bridge was already down,
so `set bridge.enabled off` after a timed-out restart left the resume
pending and MQTT restarted against the operator's choice once the task
acknowledged. Disabling now clears the pending resume before that early
return, and the resume also requires bridge_enabled. The StopUnproven
log and `get mqtt.status` no longer say only "reboot to recover", since
a late ack now recovers on its own.
Hardware (Heltec V4, 5 live slots, 1 s test stop deadline): a restart
went StopUnproven, the task acknowledged 27 s later and the bridge
resumed with all slots reconnecting; with `set bridge.enabled off` in
between it stayed stopped until `set bridge.enabled on`.
- A stop that timed out into StopUnproven refused begin(), and only a
later begin() honoured the task's late acknowledgement. Nothing called
it, so restartBridge() (any `set mqtt...` restart) or an aborted OTA left
the observer offline for the rest of the boot. MyMesh now records that a
start was refused and restarts the bridge once stopAcknowledgedLate()
reports the ack. The OTA-abort alert no longer claims "bridge resumed"
when the restart was refused.
- refreshNTP() now runs the validated probe with one attempt per server.
With two attempts and a 1 s pause it blocked the MQTT task ~18 s every
hour on networks that drop UDP/123, where the old async SNTP cost
nothing. Loop comment and docs updated to match.
startLanMode() took the caller's IP, read before the route lock. A
Wi-Fi/Ethernet switch in between left WebConfig locked to the new link
while advertising the old link's address. It now reads the selected
link's address after lockSwitching(), as startOTAUpdate() already does.
- Guard the boot-time link bootstrap to observer ESP32 builds. It ran
unconditionally in MyMesh::begin(), breaking every non-observer
repeater/room server build (ESP32 and nRF52).
- Rename NetworkInterface -> NetworkLink (class, accessor, files).
Arduino-ESP32 3.x ships its own NetworkInterface class and header,
which broke the ESP32-C6 builds. Drop WiFi.setAutoConnect(), a no-op
on 2.x and removed in 3.x.
- Refresh stored Wi-Fi credentials every bridge tick so the STA
reconnect loop picks up `set wifi.ssid` / `set wifi.pwd` without a
reboot, as the bridge did before the link moved out of it. Skip
reconnects while the SSID is empty.
- Restore the "WiFi connected: <ip>" / "WiFi disconnected: reason N"
debug lines the bridge used to print.
- Alert on Ethernet only once it has held a lease this boot or when no
Wi-Fi is configured; Wi-Fi-only installs of an Ethernet-preferred
image keep Wi-Fi alerts instead of reporting "Ethernet down".
- Record wifi.setup_complete only for Ethernet LAN onboarding, so
Wi-Fi builds keep the SSID-based first-boot portal rule.
- Use seq_cst for the route-switch lock/mutation flag handshake.
- Docs: SNMP RSSI sentinel is -127; describe link-return vs medium-switch
reconnect behavior accurately; note runtime credential pickup.
- Test: unknown keys inside a known /mqtt.json group are ignored, which
keeps wifi.setup_complete downgrade-safe.
Replace the sparse Heltec V4 R8 observer home screen with a padded dark
analytics dashboard, add manual display control, and make blanking a runtime
setting.
Dashboard (DISPLAY_ACTIVITY_DASHBOARD, the four R8 TFT observer envs):
- RadioActivityWindow: 20 one-minute buckets of valid RX packets, no heap.
The caller's 32-bit millis() is extended to a monotonic 64-bit clock, so
nothing downstream has a rollover case; an always-on node passes 2^32 ms
after ~49.7 days, which would otherwise re-enter warm-up and divide 20
minutes of traffic by seconds. Rates use 19 whole minutes plus the elapsed
part of the current one rather than a fixed 1200 s.
- ObserverDashboard: header, radio strip, headline totals, a 20-bar
packets-per-minute graph and RF/status footers, with separate portrait and
landscape layouts. A text row is a fixed 16 px, which is 3.2 logical units
in portrait but 4.27 in landscape, so one shared grid would overlap.
Text is trimmed by character budget, not measured width: getTextWidth()
reports an over-long string at the portrait driver's fallback scale, so
DisplayDriver::drawTextEllipsized() under-trims and the row renders at half
height.
- Six per-row signatures computed from what is actually drawn, so only the
rows whose pixels changed repaint. No startFrame(), no whole-screen clear.
Link state moved out of the full-frame signature, so a DHCP renewal or WiFi
flap repaints one footer row instead of the panel.
- Dark theme by retuning the UIColor statics at runtime, which needs no
display-driver edit and carries boot, setup, reboot and power-off with it.
Touch and button (DISPLAY_TOUCH_TOGGLE):
- CHSC6X at I2C 0x2E, polled; TP_INT is unusable (optional R13, and GPIO 43
is U0TXD). The point-count byte is tested against a valid count, never
against non-zero: an idle read returns 0xFF, which reads as a finger held
down forever and latches the tap detector after one event.
- turnOff() no longer parks PIN_TFT_RST low on this board. GPIO 21 is a
shared LCD_RST/TP_RST net, so doing that held the touch controller in
reset for as long as the display was off. Verified against Heltec's
expansion-board and mainboard schematics and the V4-R8 datasheet pinout,
which also correct the pin comment in HeltecV4R8Board.cpp.
- The USER button click now toggles the display too; it previously did
nothing whenever the display was already on.
display.timeout:
- `set display.timeout <secs>` / `get display.timeout`, 0 = stay on, 60 s
default, 3600 max. Read live, so a change applies without a reboot and
restarts the countdown rather than firing on the old deadline.
- Stored in MQTTPrefs (/mqtt.json), keeping NodePrefs aligned with upstream.
Runtime-only: LegacyV1MQTTPrefs and the four frozen binary payload sizes
are unchanged. No JSON format-version bump - the loader skips keys no
def() claims, so older firmware reads newer files and this firmware reads
older ones with the default applied. Both directions are covered by tests.
- Joins the observer atomic-setter contract, so a failed save rolls the live
value back instead of only claiming to.
New periodic work uses a wrap-safe deadline check; `millis() >= deadline`
fires every loop for a whole interval before each rollover.
Adds test_radio_activity_window, test_observer_dashboard (driving the real
renderer against a recording DisplayDriver in both orientation profiles) and
test_touch_tap_detector. 440 native cases pass.
Picks up upstream MeshCore 1.17.1.
Notable upstream content:
- 1.17.1 version/build-date bump in the example MyMesh headers.
- nRF52: combine radio entropy with CC310 RNG.
- Companion FEM prefs: load/save of fem_ properties commented out until they
can be set from the client.
- Scoped reply routing: replies no longer dropped when flood.max.unscoped is
low (RoutingPolicy + unit tests).
- nRF52 unused-pin sweep (T1, T-Echo Lite, MeshPocket).
No conflicts.
Brings in the external FEM gain preferences (fem_txgain, PR #3137 plus the
companion-side port), the AGC reset rxgain fix, the LR2021 preamble/IRQ
timeout logic, and assorted variant fixes (T096, T-Echo Card TCXO, promicro
pinmap, minewsemi, R1 Neo).
Conflict resolutions:
- SH1106Display: both sides fixed T-Beam Supreme startup independently. Kept
our _initialized guard and DISPLAY_ADDRESS_ALT override, took upstream's
SA0-pair fallback and its unconditional display.begin() so the frame buffer
is allocated even when no panel answers.
- MyMesh/SensorMesh/CommonCLI: took upstream's fem_txgain default and wiring,
kept our comments and the observer-side prefs layout.
Also fixes CustomLLCC68Wrapper, which upstream missed when sx126xResetAGC
gained its rx_boost_gain parameter. No variant builds that wrapper today, so
neither tree failed to compile.
Picks up upstream MeshCore 1.17.0 and the dev commits that followed it.
Notable upstream content:
- 1.17.0 version/build-date bump in the example MyMesh headers.
- anon_req hardening: reply_path_len is now uint8_t with an isValidPathLen()
bounds check and a 0xFF sentinel; reply_path_hash_size is gone.
- LR2021 support (Meshnology W12, Seeed MeshTracker X1) incl. side detectors,
multi-SF and the new `extra.sf` get/set CLI.
- CustomLFS 0.2.2 -> 0.2.3 (GD25Q64C support).
- kiss_modem envs for several nRF52 variants; ThinkNode M6 GPS/flash fixes.
Conflicts resolved:
- platformio.ini: took upstream's CustomLFS 0.2.3, kept our lib_ignore for
the vendored PsychicMqttClient.
- CommonCLI.h: kept both upstream's USE_LR2021 configSideDetectors() hook and
our fault-alert callbacks.
NodePrefs gains upstream's extra_sf[4], which is not registered with
ConfigSerializer, so /prefs.json layout is unchanged.
Verified: 275/275 native host tests pass; Heltec_v3_repeater_observer_mqtt,
Heltec_v3_repeater and heltec_v4_repeater_observer_mqtt all build.
The full embedded string is v1.16.0.5-observer-beta-dev-a1b2c3d. The -observer
tag is on every observer build and the commit is for machines, so neither tells
a person anything at a glance. Both the page header and the console banner now
show base + published build number + channel, paired with the build date the
way `ver` pairs them:
v1.16.0.5-dev (6 Jun 2026)
v1.16.0.5 (6 Jun 2026)
`ver` still prints the whole string, commit included, for when that is what you
need. The channel suffix follows the release filenames rather than the embedded
tag — build.sh writes FILENAME_CHANNEL_TAG "-dev" for the same builds it tags
"-observer-beta-dev" internally, so "-dev" is the name these already carry.
Carrying the build date meant /api/status had to report it; WebConfigServer now
takes FIRMWARE_BUILD_DATE alongside FIRMWARE_VERSION, from the same defines
`ver` reads.
A local build has neither build number nor channel to show, so the fact worth
knowing about it moves to the second line: "local build, OTA not configured".
build.sh deliberately leaves OTA_MANIFEST_BASE undefined there, and a bare
version number gives no hint that the node cannot update itself.
Neighbors publication was gated on BOARD_HAS_PSRAM. Removing that gate alone
was not enough: the feature built but was inert without PSRAM, because three
allocation sites asked for MALLOC_CAP_SPIRAM (which returns null with no
PSRAM), the bridge's persistent buffer was allocated inside a BOARD_HAS_PSRAM
block, and neighborDiscoverReady() rejected every pass at runtime on
psramFound(). The entry table also did not fit: finishNeighborDiscover put
pubkey_hex[50][65] plus entries[50] on the stack, a 4752-byte frame against
the mesh loop task's 8 KB.
- Gate on MAX_NEIGHBOURS plus PSRAM or an explicit per-variant
MQTT_NEIGHBORS_WITHOUT_PSRAM opt-in.
- Move the entry table and its hex strings into one heap block sized to the
pass; the frame drops from 4752 to 304 bytes.
- Prefer PSRAM and fall back to internal DRAM in the mesh-side allocations
and the ArduinoJson pool; hoist the bridge's persistent buffer out of the
BOARD_HAS_PSRAM block (psram_malloc already falls back).
- Keep the runtime psramFound() check only where the buffers are sized for
PSRAM, so a board whose PSRAM failed to init still refuses.
- Size for internal DRAM without PSRAM: 4 KB text buffer and 20 entries per
publish, keeping the pool to a single block and the peak near 13 KB rather
than ~35 KB. Oversized tables truncate and report total_neighbors as before.
Enabled on the ESP32-S3 observer envs (Heltec V3/WSL3, RAK3112, Heltec
Tracker v1.1/v2). Left off for the classic ESP32 T-LoRa V2.1-1.6, which is
already limited to one active TLS slot.
Costs ~7.4 KB static DRAM on repeaters and ~9.6 KB on room servers. The
prefs layout is unchanged, so this is neutral for existing devices.
ArduinoJson v7 hands out document-pool blocks in fixed 4096-byte chunks, so
the pool is not bounded by the size of the text it serialises to. Budgeting
it at NEIGHBORS_JSON_BUFFER_SIZE starved it once the table grew: a 50-entry
table needs 12541 B of pool against the 10240 B cap, and a starved allocator
sets doc.overflowed(), which makes buildNeighborsMessage return 0 and drop
the entire publish rather than truncating the tail.
Repeaters with roughly 40 or more neighbours therefore published no neighbors
message at all, silently, while smaller tables published normally.
Give the pool its own NEIGHBORS_DOC_POOL_BUDGET and add an explicit
NEIGHBORS_MAX_PUBLISH_ENTRIES cap alongside the existing text-size check.
A neighbour heard before the clock is set carries the firmware's unset-clock
default (1715770351, 15 May 2024). Subtracting that from an NTP-synced clock
published ages of ~806 days for neighbours that had just answered a live scope
query, and a backwards clock step reported 0, i.e. "heard just now".
- finishNeighborDiscover() reports the age as unknown ("heard_secs_ago": null)
when the stored stamp and the current clock come from different epochs, or
when the clock has stepped backwards
- handleNeighborDiscoverResponse() re-stamps heard_timestamp on a zero-hop scope
reply, in both the snapshot and the live table, so entries heal once per
discovery cycle instead of waiting for the neighbour's next advert
- publish ordering places usable ages ahead of unknown ones so a poisoned stamp
cannot displace fresh entries when the JSON buffer truncates
- document the null case, and the always-present total_neighbors /
queried_neighbors / truncated fields the payload sample omitted
- add UPSTREAM_BUGS.md, tracking the monotonic-uptime fix to propose upstream
plus the unclamped subtraction in the companion and CLI readouts
Containment only: upstream still stamps neighbours from the wall clock at
packet-reception time, which on a cold boot always precedes NTP.
Absorbs 106 upstream commits. Seven files conflicted; the substantive one
was upstream's new JSON ConfigSerializer (PR #2982), which replaces the
binary /com_prefs layout with /prefs.json and makes NodePrefs a
ConfigSerializer subclass.
Prefs migration
- Adopt upstream's ConfigSerializer. writeCommonPrefsImage() and its
documented offsets (0-294) are deleted, along with the now-unreachable
saveCommonPrefsImageAtomically()/CommonPrefsFileStore atomic rename path.
- Load order is /prefs.json, then /com_prefs, then /node_prefs. Upstream
dropped the /node_prefs fallback; it is restored here so devices that
never advanced past that filename keep their config.
- Legacy files are never removed, so migration cannot destroy its own
source and a deferred or failed save simply retries next boot.
- /com_prefs is treated as a format migration only, not an "upgrade", so
it does not trip the bridge.source tx->rx flip on existing nodes.
- The MQTTPrefsAtomicStore legacy gate is retained: the observer tail
recovered from an old-format file still commits to /mqtt_prefs before
/prefs.json is written.
- MQTTPrefs and /mqtt_prefs are untouched; savePrefs keeps its save_mqtt
parameter and now returns upstream's bool.
Fixes to upstream code
- RadioPrefs::structure() bound both "rxgain" and "fem_rxgain" to
rx_boosted_gain, so radio_fem_rxgain was never persisted. Bound to the
correct field.
- discovery_mod_timestamp was dropped from structure(); it gates
'since'-filtered DISCOVER replies and is set on every config change, so
losing it would silently stop discovery responses after a reboot. Added
as "disc_mod".
Merge artifacts repaired
- Restored bblanchon/ArduinoJson to the native test env; a clean but wrong
auto-merge at the lib_deps block boundary dropped it and broke all 19
host test suites.
- Migrated the fork's WebConfig UITask screens off the removed
DisplayDriver::Color enum to upstream's UIColor element types.
- Removed duplicate getCADEnabled() definitions in companion MyMesh.cpp
and simple_sensor SensorMesh.cpp that both sides had added.
- Dropped memset(&_prefs, 0, ...) in the four example meshes; NodePrefs now
has a vtable. guard gains an initializer that memset used to provide.
Other resolutions
- simple_room_server keeps both the fork's discover.* commands and
upstream's new room.post.
- docs/payloads.md taken from upstream, undoing content earlier merges had
reverted (Control data section, split login tables).
Verified: 273/273 host tests pass across native and native_kiss_modem;
Heltec v3 repeater, repeater_observer_mqtt, room_server_observer_mqtt,
sensor, and companion_radio_ble all build clean.
Enhance the neighbor discovery JSON structure by introducing a
default_scope field, which indicates the region name this node
floods to by default. This change improves clarity in the
neighbor discovery process and aligns with the unscoped flood
behavior when no default region is set. Updates include
modifications to the MyMesh class and related message building
functions to accommodate the new field.
Add support for named packet types in per-slot filters, allowing users
to specify packet types using descriptive names alongside numeric values.
This improves usability and clarity in configuring MQTT slot filters.
Updates include modifications to the parsing logic, WebConfig interface,
and related documentation to reflect the new naming conventions.
Introduce new methods to manage neighbor discovery JSON budget and
entries in MyMesh. This includes tracking the number of queried and
published neighbors, measuring JSON sizes, and handling truncation
when the buffer limit is reached. These improvements optimize the
neighbor discovery process and ensure efficient JSON message
construction for MQTT communications.
Add functionality to manage neighbor discovery requests in MyMesh.
This includes handling the status of requests, updating the state
upon transmission success or failure, and implementing a timeout
mechanism for neighbor discovery queries. The changes improve the
efficiency and reliability of neighbor discovery operations in
MQTT-enabled environments.
Improve the response message for the `alert test` command to clarify
that a successful test send does not guarantee automatic alerts are
enabled. This change helps prevent confusion for operators regarding
the status of the alert system after testing.
Port the neighbor-discovery state machine from mqtt-bridge-implementation-flex,
adapted to this branch's MyMesh (WebConfig members shifted the insertion points;
applied by content).
- Two-stage periodic refresh in loop() driven by mqtt_neighbors_interval:
stage 1 is a zero-hop sendNodeDiscoverReq() (reuses the existing 60s window),
stage 2 (startNeighborDiscover) fires one anon-regions scope query per heard
neighbour, then finishNeighborDiscover() builds the table JSON via
MQTTMessageBuilder::buildNeighborsMessage and hands it to
bridge->requestPublishNeighbors().
- Peer overlay at NEIGHBOR_DISCOVER_PEER_BASE lets scope-query RESPONSE packets
from non-ACL neighbours decrypt: searchPeersByHash prepends heard neighbours
(bounded by MAX_CLIENTS), getPeerSharedSecret derives the secret on the fly,
and onPeerDataRecv routes both overlay-index and ACL-client-that-is-a-neighbour
responses into handleNeighborDiscoverResponse.
- Entries ordered most- to least-useful (recent, then stronger SNR) so the JSON
builder's tail-drop keeps the useful head.
- `discover.scopes` CLI command (manual trigger), with a WITH_MQTT_BRIDGE stub
replying "requires PSRAM" on non-PSRAM builds.
- Reports schedule to the bridge each loop via setNeighborsSchedule().
- Uses ArduinoJson v7 JsonDocument (not deprecated DynamicJsonDocument).
All gated on WITH_MQTT_NEIGHBORS. Reuses the existing MQTTBridge* member.
Verified: T_Beam_S3_Supreme_SX1262_repeater_observer_mqtt builds [SUCCESS].
First upstream merge since the 2026-06-06 base (191 upstream commits). 14 files
conflicted; resolutions below.
Fleet-critical check (Constraint 1): upstream reordered NodePrefs members
(rx_boosted_gain / path_hash_mode moved to the struct tail) but did NOT change
/com_prefs. Persistence is written field-by-field at explicit offsets, so member
order is in-memory only. Verified the fork's writeCommonPrefsImage() is
byte-identical to upstream's inline writer at every offset (79 pad, 121, 122,
290-294). No migration needed.
Resolutions:
- CommonCLI.h: kept the fork's NodePrefs (superset) and adopted upstream's
setRxBoostedGain(bool)->bool signature change, which CommonCLI.cpp now uses to
report unsupported. Corrected a stale comment claiming rx_boosted_gain lives at
offset 79 (it is a pad; the field is at 290).
- CommonCLI.cpp: kept the fork's legacy /com_prefs migration and the extracted
writeCommonPrefsImage() call.
- UITask.cpp: three-way merge - upstream's drawTextCentered + powering-off
screen, plus the fork's WITH_WEBCONFIG portal/reboot screens.
- ESP32Board.cpp, MeshCore.h, platformio.ini: kept both sides (fork OTA additions
alongside upstream powerOff/enterDeepSleep and Packet.cpp).
- MicroNMEALocationProvider.h: took upstream's claim/release and added the
_claims member they depend on.
- MyMesh.cpp/.h (repeater + room server): kept the fork's superset defaults.
- Removed duplicate declarations auto-merge produced: RadioLibWrapper::_cad_enabled
and MyMesh::getCADEnabled().
Verification: native suite 15/15 (incl. upstream's new test_mesh_tables), both
MQTT smoke builds green, ArduinoJson pin check passes. Hardware validation next.
An operator who triggers `ota update` via remote management only sees the
command's reply; the actual OTA runs ~2.5s later and reboots on success,
so the start/fail notifications land outside the reply window. Mirror the
key OTA milestones onto the configured alert channel (in addition to the
Serial log):
- START ("OTA update starting") from beginDeferredOtaUpdate(), i.e. while
the loop still runs -- a flood queued at the deferred fire could never
transmit before the flash blocks the loop / reboots on success.
- FAIL ("OTA aborted: ...") at both abort points (teardown barrier
withheld flashing; preflight/download error).
Success has no message: a successful flash reboots into the new image, so
the node returning on the new version is the signal.
New MyMesh::otaAlert() gates on the `alert on/off` master switch and rides
the configured alert scope (AlertReporter::sendText -> sendChannel ->
resolveAlertScope); no-op when alerts are off or no channel is set. Only
these start/fail milestones -- routine slot connect/disconnect is
unaffected (stays in AlertReporter's fault logic). Documented in ALERTS.md.
Both observer firmwares build.
Wire the Phase 4 MQTTLifecycle state machine into MQTTBridge to replace the
blind vTaskDelete teardown that could kill the MQTT task mid-mbedTLS and then
free client buffers on a corrupted heap (the observed OTA teardown panic).
- MQTTBridge owns a MQTTLifecycle::Coordinator driven only by the loop task
(Core 1) from begin()/end(); a nested LifecycleOps binds the host-tested Ops
spec to FreeRTOS/PsychicMqttClient.
- end() requests a cooperative stop; the MQTT task (Core 0) tears down its own
clients where the mbedTLS contexts live, acks via _stop_acked, and
self-terminates. end() waits (bounded) for the ack, then frees queue/buffers.
- Bounded stop timeout -> reviewed fallback (force kill + Core-1 teardown) sets
a dirty latch that withholds OTA flashing.
- begin() gains an idempotent double-call guard and syncs the Coordinator to
Running.
- OTA teardown barrier: simple_repeater's deferred flash aborts/resumes unless
end() reported a clean stop (canFlashAfterStop()).
Scope: minimal cooperative-shutdown unit. The volatile NTP/reconfigure handshake
replacement and the plain-data snapshot / consumer repointing (MQTT_OWNERSHIP.md
sections 1-3) are deferred. MQTT_STOP_TIMEOUT_MS is a Phase-0 placeholder pending
on-hardware characterization.
Native suite green (incl. test_mqtt_lifecycle); both observer firmware smoke
builds compile. Not yet hardware-validated (Phase 7 gate).
Include detailed instructions for local testing of observer and WiFi
functionality without hardware. Document the use of a mock backend and
Wokwi ESP32-S3 simulation for easier development and testing.
Enhance the MQTT implementation documentation to improve developer
experience and facilitate testing workflows.
agessaman