The FEM commands moved out of CommonCLI into Board::handleCommand(), and
the T-Beam 1W fan control was added there too, but the portal never caught
up: `radio.fem.txgain` and the fan commands were missing from the terminal
table entirely, while `radio.fem.rxgain` was offered on every board even
though a board with no hook now answers "??:" rather than "unsupported".
Whether a node answers these is a property of the board, not of the build,
so the page cannot know from the firmware version. Ask the board instead:
probeBoardCommands() runs each candidate getter once on the loop task at
startup and keeps the ones that answer, which needs no per-variant list
because Board::handleCommand() already reports whether it handled a
command. /api/status names the survivors and the page hides everything
else, so adding a command to a variant means one entry in WC_BOARD_CMDS
rather than an edit per board.
The two FEM keys also become Radio-panel toggles, gated the same way;
their `set` reaches the board hook through the existing config batch, so
only the allowlist and /api/config needed to grow.
webconfig_cli_audit.py now scans variants/*/*Board.cpp for the boards that
actually build the portal, checks set-only keys in the reverse direction,
and verifies every gate is a command some board answers; the mock gained
--board-cmds so both shapes of board are testable. `stop ota` joins
NOT_OFFERED: `start ota` cannot run from the portal, so it has nothing to
stop.
The project moved to meshcore-dev/meshcore, but two links still pointed at
ripplebiz/MeshCore: the GitHub Issues link in README and the git clone in the
FAQ build instructions.
Also fixes the FAQ build recipe:
- `pio run -e RAK_4631_Repeater` does not exist; the env is spelled
RAK_4631_repeater (variants/rak4631/platformio.ini:40).
- LORA_FREQ was given as 867.5; the default in [arduino_base] is 869.618
(platformio.ini:29). Reworded to point at the flag rather than a value that
drifts with the default preset.
- Renamed the venv so it no longer collides with the cloned directory name.
And one more env-name casing slip in the Raspberry Pi flashing instructions:
`Heltec_V3_companion_radio_ble` should be `Heltec_v3_...`. Release artifacts are
named directly from the env name (build.sh:147), and the two neighbouring
examples in the same block already use the lowercase spelling.
f6338430 added get/set dutycycle to CommonCLI and updated both CLI docs, but
Terminal Chat does not use CommonCLI -- simple_secure_chat/main.cpp:479-507 has
its own `set` handler supporting only af, name, lat, lon, tx and freq. Typing
`set dutycycle` there returns "ERROR: unknown config".
Restores `set af` as the documented command, points readers at cli_commands.md
for the roles that do have dutycycle, and documents `help`
(simple_secure_chat/main.cpp:510), which the client implements but the doc
never listed.
The doc claimed every pwrmgt command except `get pwrmgt.support` returns
"ERROR: Power management not supported" when NRF52_POWER_MANAGEMENT is not
defined. `get pwrmgt.bootreason` is not inside the #ifdef (CommonCLI.cpp:787)
and answers on all boards; only pwrmgt.source and pwrmgt.bootmv are gated.
Three factual errors in companion_protocol.md:
- The channel-datagram payload cap was given as 163 (MAX_FRAME_SIZE - 9 when
MAX_FRAME_SIZE was still 172). It went 172 -> 176 in 62f1b11d, but simply
updating the arithmetic to 167 would be worse than the stale value: 167 is
only the host-frame bound (MyMesh.cpp:1265). The radio-side bound is
MAX_GROUP_DATA_LENGTH = 184 - 16 - 3 = 165 (MeshCore.h:21, enforced at
BaseChatMesh.cpp:544). A 166- or 167-byte payload passes the frame check,
fails the radio check, and comes back as ERR_CODE_TABLE_FULL -- which this
same doc describes as "retry later", so a conforming client would retry a
permanently failing send forever. Documents 165 as the limit to enforce and
calls out the 166-167 band explicitly.
- Channel index was documented as 0-7 throughout. The bound is
MAX_GROUP_CHANNELS (BaseChatMesh.cpp:927,936), which is 40 on most current
variants, 8 on some and 1 on others. Clients should read max_channels from
byte 3 of PACKET_DEVICE_INFO instead. Index 0 is pre-populated with the
built-in Public channel but is not reserved.
- The secret field was documented as "all zeros" for public channels. The
firmware always hashes a real 16-byte key; the public channel ships with
izOH6cXN6mrJ5e26oRXNcg== (companion_radio/MyMesh.cpp:111,1040). An all-zero
secret is not a private channel and not an inert one: SHA256 over 16 zero
bytes is a fixed global constant, giving a well-known channel with an
all-zero AES key. searchChannelsByHash skips unnamed slots for exactly this
reason (BaseChatMesh.cpp:392-401), but a named slot with a zero secret is
not skipped and will absorb null-key group traffic from any node. Now
documented as something not to do.
Five "Default:" values in cli_commands.md no longer matched the firmware:
- radio / freq: the default preset moved to EU/UK (Narrow) in b777a7c6,
changing LORA_FREQ/BW/SF from 869.525/250/11 to 869.618/62.5/8
(platformio.ini:29-31). No variant overrides these, and LORA_CR is 5
on every path, so the full preset is 869.618,62.5,8,5.
- flood.advert.interval: raised to 47 hours in 40180b8f for both repeater
and room server; sensor leaves it disabled.
- advert.interval: prefs store minutes/2 and the getter doubles on read, so a
factory-fresh node reports 2, not 0. But savePrefs() zeroes any interval
below the 60 minute minimum (CommonCLI.cpp:162-165), and it is called from
every `set` handler -- so the value becomes 0 as soon as the node is
configured. Documented both states, since neither alone is the whole story.
- direct.txdelay: repeater defaults to 0.3, room server and sensor to 0.2.
Sources: platformio.ini:29-31, simple_repeater/MyMesh.cpp:893,903-904,
simple_room_server/MyMesh.cpp:650,661-662, simple_sensor/SensorMesh.cpp:716,
726-727, CommonCLI.cpp:162-165,680-681.
Adds both settings to docs/cli_commands.md in the existing format, and records
the R8 dashboard, display controls and the two hardware fixes in the changelog.
The display.flip entry calls out that it is persisted config which survives a
firmware update, since a node still carrying flip=1 from testing looks exactly
like a firmware whose orientation was never fixed.
The reduced-TLS work was validated on hardware but only reachable through
PLATFORMIO_BUILD_FLAGS pointing at an absolute path in a developer's home
directory, so nothing outside that machine could reproduce it.
Distribute the archives as a release asset instead of committing them: ~6 MB
per architecture, and they must be rebuilt for every espressif32 bump, so
committing would grow history permanently and go stale without any signal.
scripts/mbedtls_4k_manifest.txt per-arch sha256 of each archive
scripts/fetch_mbedtls_4k.sh fetch into .mbedtls-4k/<arch>/, verify
scripts/mbedtls_4k.py pre-build wiring and post-link proof
Off by default. The script is attached to esp32_base but returns immediately
unless MESHCORE_REDUCED_TLS=1, so ordinary builds need no artifact and are
byte-for-byte unaffected — confirmed by building with it absent.
Both ways this can fail silently produce a firmware that looks fine and lacks
the change, so the opt-in path refuses to guess:
- a -L at a missing or partial directory: the linker ignores an unusable
search path and resolves mbedTLS from the framework. Now a hard error.
- archives left over from an earlier platform version: now a sha256
mismatch against the manifest, naming both hashes.
- a -L that is present but outranked, leaving the flag inert: after the
link, firmware.map must resolve every libmbed*.a into .mbedtls-4k/, or
the build fails and prints the offending paths.
That last check earned its place immediately — it caught its own first
implementation comparing a relative map path against an absolute one, and an
earlier build flag in this investigation was accepted by the compiler while
no source read it. A flag reaching the compiler proves nothing about the link.
Verified all four paths on Heltec_v3_repeater_observer_mqtt: default build
unaffected; opted in with archives present links all four from .mbedtls-4k/
and says so; archives absent fails with a fetch hint; a single appended byte
fails on sha256.
Also removes platformio.local.ini.hold, which held the superseded approach of
pointing platform_packages at a whole custom framework. That installs over the
shared framework package and changes mbedTLS for every other ESP32 project on
the machine; the -L path keeps the change scoped to one env.
Note the inbound record buffer stays at 16 KiB, so this lowers per-connection
footprint by ~12 KiB but does not move the contiguous allocation a handshake
needs. It buys headroom, not a lower floor.
(cherry picked from commit a87faff6ff170c328fdd0550f4b4dd9089aa2ea0)
Brings in the external FEM gain preferences (fem_txgain, PR #3137 plus the
companion-side port), the AGC reset rxgain fix, the LR2021 preamble/IRQ
timeout logic, and assorted variant fixes (T096, T-Echo Card TCXO, promicro
pinmap, minewsemi, R1 Neo).
Conflict resolutions:
- SH1106Display: both sides fixed T-Beam Supreme startup independently. Kept
our _initialized guard and DISPLAY_ADDRESS_ALT override, took upstream's
SA0-pair fallback and its unconditional display.begin() so the frame buffer
is allocated even when no panel answers.
- MyMesh/SensorMesh/CommonCLI: took upstream's fem_txgain default and wiring,
kept our comments and the observer-side prefs layout.
Also fixes CustomLLCC68Wrapper, which upstream missed when sx126xResetAGC
gained its rx_boost_gain parameter. No variant builds that wrapper today, so
neither tree failed to compile.
Documents why the largest allocatable block on a non-PSRAM observer walks down in
16 KiB steps at every TLS reconnect, and what to do about it.
The framework builds mbedTLS with the symmetric buffer configuration
(CONFIG_MBEDTLS_SSL_MAX_CONTENT_LEN 16384), so each broker slot holds two 16 KiB
record buffers in internal DRAM and two slots cost 64 KiB on a board with about
80 KiB free. Confirmed against the sdkconfig the Heltec env actually links, not
the IDF 5.3 libs package that belongs to the esp32c6 env.
Rebuilding only the mbedTLS archives with an asymmetric outbound buffer of 4 KiB
is ABI-safe, because in_buf/out_buf are heap pointers sized in ssl_setup() and no
public struct embeds a CONTENT_LEN-sized array. Dropping KEEP_PEER_CERTIFICATE is
not, since it changes mbedtls_ssl_session layout, so it is excluded.
Also records two traps worth not rediscovering: esp32-arduino-lib-builder's
release/v4.4 clones its dependencies at master and no longer resolves, and
pointing platform_packages at a file:// framework copy overwrites the shared
package for every other project on the machine.
Picks up upstream MeshCore 1.17.0 and the dev commits that followed it.
Notable upstream content:
- 1.17.0 version/build-date bump in the example MyMesh headers.
- anon_req hardening: reply_path_len is now uint8_t with an isValidPathLen()
bounds check and a 0xFF sentinel; reply_path_hash_size is gone.
- LR2021 support (Meshnology W12, Seeed MeshTracker X1) incl. side detectors,
multi-SF and the new `extra.sf` get/set CLI.
- CustomLFS 0.2.2 -> 0.2.3 (GD25Q64C support).
- kiss_modem envs for several nRF52 variants; ThinkNode M6 GPS/flash fixes.
Conflicts resolved:
- platformio.ini: took upstream's CustomLFS 0.2.3, kept our lib_ignore for
the vendored PsychicMqttClient.
- CommonCLI.h: kept both upstream's USE_LR2021 configSideDetectors() hook and
our fault-alert callbacks.
NodePrefs gains upstream's extra_sf[4], which is not registered with
ConfigSerializer, so /prefs.json layout is unchanged.
Verified: 275/275 native host tests pass; Heltec_v3_repeater_observer_mqtt,
Heltec_v3_repeater and heltec_v4_repeater_observer_mqtt all build.
PA PL1 re-targets the PA's DC-DC supply rail rather than selecting a
logic-level gain, and the serial CLI is serviced on every main-loop pass
regardless of whether a transmit is in flight. A `set radio.fem.txgain`
write could therefore move the rail mid-transmit, while the SX1262 was
still driving the PA at full input power.
Record the requested level in setPAGainEnable() and drive the pin from
setTxModeEnable(), which runs from onBeforeTransmit() ahead of
startTransmit(). The level only matters while transmitting, so deferring
costs nothing.
Document that the pref is saved immediately but applied at the next
transmit, so `get radio.fem.txgain` can lead the hardware until then.
Neighbors publication was gated on BOARD_HAS_PSRAM. Removing that gate alone
was not enough: the feature built but was inert without PSRAM, because three
allocation sites asked for MALLOC_CAP_SPIRAM (which returns null with no
PSRAM), the bridge's persistent buffer was allocated inside a BOARD_HAS_PSRAM
block, and neighborDiscoverReady() rejected every pass at runtime on
psramFound(). The entry table also did not fit: finishNeighborDiscover put
pubkey_hex[50][65] plus entries[50] on the stack, a 4752-byte frame against
the mesh loop task's 8 KB.
- Gate on MAX_NEIGHBOURS plus PSRAM or an explicit per-variant
MQTT_NEIGHBORS_WITHOUT_PSRAM opt-in.
- Move the entry table and its hex strings into one heap block sized to the
pass; the frame drops from 4752 to 304 bytes.
- Prefer PSRAM and fall back to internal DRAM in the mesh-side allocations
and the ArduinoJson pool; hoist the bridge's persistent buffer out of the
BOARD_HAS_PSRAM block (psram_malloc already falls back).
- Keep the runtime psramFound() check only where the buffers are sized for
PSRAM, so a board whose PSRAM failed to init still refuses.
- Size for internal DRAM without PSRAM: 4 KB text buffer and 20 entries per
publish, keeping the pool to a single block and the peak near 13 KB rather
than ~35 KB. Oversized tables truncate and report total_neighbors as before.
Enabled on the ESP32-S3 observer envs (Heltec V3/WSL3, RAK3112, Heltec
Tracker v1.1/v2). Left off for the classic ESP32 T-LoRa V2.1-1.6, which is
already limited to one active TLS slot.
Costs ~7.4 KB static DRAM on repeaters and ~9.6 KB on room servers. The
prefs layout is unchanged, so this is neutral for existing devices.
Absorbs 106 upstream commits. Seven files conflicted; the substantive one
was upstream's new JSON ConfigSerializer (PR #2982), which replaces the
binary /com_prefs layout with /prefs.json and makes NodePrefs a
ConfigSerializer subclass.
Prefs migration
- Adopt upstream's ConfigSerializer. writeCommonPrefsImage() and its
documented offsets (0-294) are deleted, along with the now-unreachable
saveCommonPrefsImageAtomically()/CommonPrefsFileStore atomic rename path.
- Load order is /prefs.json, then /com_prefs, then /node_prefs. Upstream
dropped the /node_prefs fallback; it is restored here so devices that
never advanced past that filename keep their config.
- Legacy files are never removed, so migration cannot destroy its own
source and a deferred or failed save simply retries next boot.
- /com_prefs is treated as a format migration only, not an "upgrade", so
it does not trip the bridge.source tx->rx flip on existing nodes.
- The MQTTPrefsAtomicStore legacy gate is retained: the observer tail
recovered from an old-format file still commits to /mqtt_prefs before
/prefs.json is written.
- MQTTPrefs and /mqtt_prefs are untouched; savePrefs keeps its save_mqtt
parameter and now returns upstream's bool.
Fixes to upstream code
- RadioPrefs::structure() bound both "rxgain" and "fem_rxgain" to
rx_boosted_gain, so radio_fem_rxgain was never persisted. Bound to the
correct field.
- discovery_mod_timestamp was dropped from structure(); it gates
'since'-filtered DISCOVER replies and is set on every config change, so
losing it would silently stop discovery responses after a reboot. Added
as "disc_mod".
Merge artifacts repaired
- Restored bblanchon/ArduinoJson to the native test env; a clean but wrong
auto-merge at the lib_deps block boundary dropped it and broke all 19
host test suites.
- Migrated the fork's WebConfig UITask screens off the removed
DisplayDriver::Color enum to upstream's UIColor element types.
- Removed duplicate getCADEnabled() definitions in companion MyMesh.cpp
and simple_sensor SensorMesh.cpp that both sides had added.
- Dropped memset(&_prefs, 0, ...) in the four example meshes; NodePrefs now
has a vtable. guard gains an initializer that memset used to provide.
Other resolutions
- simple_room_server keeps both the fork's discover.* commands and
upstream's new room.post.
- docs/payloads.md taken from upstream, undoing content earlier merges had
reverted (Control data section, split login tables).
Verified: 273/273 host tests pass across native and native_kiss_modem;
Heltec v3 repeater, repeater_observer_mqtt, room_server_observer_mqtt,
sensor, and companion_radio_ble all build clean.
mkdocs will only consider the first H1 (if any) and subheaders under it for the table of contents
this increases the header levels of everything below "important concepts" by 1 so that the table of contents correctly resolves them
Enhance the documentation for the `start ota` command to clarify its
behavior when connected to a Wi-Fi network versus when using the
`start ota ap` option. This provides users with better guidance on
how to initiate OTA updates under different network conditions.
First upstream merge since the 2026-06-06 base (191 upstream commits). 14 files
conflicted; resolutions below.
Fleet-critical check (Constraint 1): upstream reordered NodePrefs members
(rx_boosted_gain / path_hash_mode moved to the struct tail) but did NOT change
/com_prefs. Persistence is written field-by-field at explicit offsets, so member
order is in-memory only. Verified the fork's writeCommonPrefsImage() is
byte-identical to upstream's inline writer at every offset (79 pad, 121, 122,
290-294). No migration needed.
Resolutions:
- CommonCLI.h: kept the fork's NodePrefs (superset) and adopted upstream's
setRxBoostedGain(bool)->bool signature change, which CommonCLI.cpp now uses to
report unsupported. Corrected a stale comment claiming rx_boosted_gain lives at
offset 79 (it is a pad; the field is at 290).
- CommonCLI.cpp: kept the fork's legacy /com_prefs migration and the extracted
writeCommonPrefsImage() call.
- UITask.cpp: three-way merge - upstream's drawTextCentered + powering-off
screen, plus the fork's WITH_WEBCONFIG portal/reboot screens.
- ESP32Board.cpp, MeshCore.h, platformio.ini: kept both sides (fork OTA additions
alongside upstream powerOff/enterDeepSleep and Packet.cpp).
- MicroNMEALocationProvider.h: took upstream's claim/release and added the
_claims member they depend on.
- MyMesh.cpp/.h (repeater + room server): kept the fork's superset defaults.
- Removed duplicate declarations auto-merge produced: RadioLibWrapper::_cad_enabled
and MyMesh::getCADEnabled().
Verification: native suite 15/15 (incl. upstream's new test_mesh_tables), both
MQTT smoke builds green, ArduinoJson pin check passes. Hardware validation next.
Switch ESP32-S3 KISS modem environments to HWCDC and move outbound KISS writes to a non-blocking queued frame path so loop() and TX completion keep progressing when the host reads slowly. Add native backpressure regression tests and correct the native_kiss_modem test filter so this suite runs directly with pio test.
Adds a small allocation for groupdata packets for the Meshcore firmware for the StreamSensor product. It was previously a LoRaWAN platform, and we've moved to Meshcore.
Let me know when and how to demonstrate.
Adds a small allocation for groupdata packets for the Meshcore firmware for the StreamSensor product. It was previously a LoRaWAN platform, and we've moved to Meshcore.
Implemented new commands for configuring and diagnosing NTP server
settings in the MQTT bridge. Users can now set a custom NTP server
and probe connectivity to configured servers. This enhancement
improves time synchronization reliability for JWT authentication
and provides better diagnostics for NTP connectivity issues.
agessaman