The room server never supported RX boosted gain, while the repeater
does. Three consequences on SX1262/SX1268 boards:
- boosted gain was never applied to the radio at boot, so a room server
ran in power-saving RX mode while an identical repeater ran boosted -
a real receive-sensitivity difference with nothing pointing at it
- _prefs.rx_boosted_gain was never initialised (the prefs are memset to
0 before defaults are set), so it defaulted to off
- 'set radio.rxgain on' replied "Error: unsupported" but CommonCLI had
already written the value to prefs and saved them, so a stale setting
survived reboot and was never applied
Mirror the repeater's implementation: initialise the pref default under
the same USE_SX1262/USE_SX1268 and SX126X_RX_BOOSTED_GAIN guards, apply
it during radio init, and override setRxBoostedGain() so the CLI reports
success and takes effect.
Built Heltec_v3_room_server (SX1262) and LilyGo_T3S3_sx1276_room_server
(guards compile out cleanly).
Implement SNMP functionality in MyMesh to provide radio diagnostics
and statistics updates. This includes a new method for formatting
radio diagnostic replies and periodic updates to the SNMP agent
with radio stats, enhancing monitoring capabilities for users
with SNMP enabled.
Add functionality to schedule deferred OTA updates in the MyMesh class.
This includes a new member variable to track the update time and a method
to initiate the update process, allowing for a smoother OTA experience
by managing timing and state transitions effectively.
Cherry-picked from observer-firmware (76f44d7d). Resolved a conflict in
loop() where the WITH_WEBCONFIG block occupies the same anchor and shares
an identical closing tail; both blocks retained.
Add support for neighbor discovery and management in the MyMesh class.
This includes structures for neighbor information, methods for handling
neighbor advertisements, and control data reception. The new features
allow for dynamic neighbor management, enhancing the mesh network's
capabilities. Additionally, the maximum number of neighbors is set to
50 across various platform configurations.
First upstream merge since the 2026-06-06 base (191 upstream commits). 14 files
conflicted; resolutions below.
Fleet-critical check (Constraint 1): upstream reordered NodePrefs members
(rx_boosted_gain / path_hash_mode moved to the struct tail) but did NOT change
/com_prefs. Persistence is written field-by-field at explicit offsets, so member
order is in-memory only. Verified the fork's writeCommonPrefsImage() is
byte-identical to upstream's inline writer at every offset (79 pad, 121, 122,
290-294). No migration needed.
Resolutions:
- CommonCLI.h: kept the fork's NodePrefs (superset) and adopted upstream's
setRxBoostedGain(bool)->bool signature change, which CommonCLI.cpp now uses to
report unsupported. Corrected a stale comment claiming rx_boosted_gain lives at
offset 79 (it is a pad; the field is at 290).
- CommonCLI.cpp: kept the fork's legacy /com_prefs migration and the extracted
writeCommonPrefsImage() call.
- UITask.cpp: three-way merge - upstream's drawTextCentered + powering-off
screen, plus the fork's WITH_WEBCONFIG portal/reboot screens.
- ESP32Board.cpp, MeshCore.h, platformio.ini: kept both sides (fork OTA additions
alongside upstream powerOff/enterDeepSleep and Packet.cpp).
- MicroNMEALocationProvider.h: took upstream's claim/release and added the
_claims member they depend on.
- MyMesh.cpp/.h (repeater + room server): kept the fork's superset defaults.
- Removed duplicate declarations auto-merge produced: RadioLibWrapper::_cad_enabled
and MyMesh::getCADEnabled().
Verification: native suite 15/15 (incl. upstream's new test_mesh_tables), both
MQTT smoke builds green, ArduinoJson pin check passes. Hardware validation next.
Integrates Mike Carper's transmission-reliability work (direct retries with
SNR-adaptive backoff and CR, flood retry controls, alt-path replies, flood
channel gates) plus its upstream/dev base (as of 2026-07-06) on top of the
observer stack. The flex branch is untouched; this branch is the experimental
integration line.
Conflict-resolution decisions, for future re-syncs (git rerere is enabled and
has recorded these):
- NodePrefs adopts keymind/upstream member order + retry/flood tail. Member
order is in-memory only: /com_prefs stays field-by-field with the same
canonical file order both sides already share through offset 294; keymind
appends the retry tail at 295+ (new canonical size 676). Flex fleet files
load unchanged; retry fields default via direct_retry_prefs_magic.
- loadPrefsInt keeps the fork's legacy MQTT-gap recovery but moves its
detection boundary from 'extra > 5' to 'extra > LEGACY_MQTT_GAP_3SLOT (864)'
so keymind-size tails take the normal read path. COM_PREFS_TAIL_BYTES
retired.
- Dispatcher/RadioLibWrappers: fork watchdog additions + keymind TX overrides
and CAD busy counter are unioned; RxReservePacketManager::queueOutbound
follows upstream's new bool return (false when shedding).
- CommonCLI: fork observer dispatch + versioned /mqtt_prefs machinery kept;
keymind CLI (retry/flood/radioat) taken; duplicate CAD/FEM handlers and
sanitise lines deduped (kept keymind placements to minimize future diff).
- MyMesh (repeater/room): fork alerter/OTA/observer wiring kept; keymind
scheduled-radio system replaces the old pending_* temp-radio members;
applySavedRadioParams() replaces raw setParams at startup.
- ESP32Board: fork manifest-OTA + keymind powerOff/deepSleep and stopOTAUpdate
unioned; startOTAUpdate keeps fork's STA-aware IP with keymind's idempotency
guard.
- build.sh taken wholesale from keymind (fleet builds use GH Actions).
Verified: Heltec_v3_repeater_observer_mqtt, Heltec_v3_repeater,
heltec_v4_repeater_observer_mqtt, Heltec_v3_room_server_observer_mqtt build;
host migration harness (13 MQTT + non-MQTT scenarios) passes with updated
expectations (676-byte /com_prefs; odd-size files normalize on save, not
load); native unit tests 13/13.
Load-testing the restored token bucket at 'set dutycycle 1' showed MQTT
capture dropping to exactly the TX rate. Queued retransmissions hold static-
pool packets with no expiry, so throttling parks the whole pool in the send
queue; Dispatcher::checkRecv() then discards received packets before logRx()
ever feeds the bridge — each completed TX frees exactly one packet for
exactly one more RX.
Observer builds now use RxReservePacketManager (fork-owned header): once the
free pool drops below a quarter of the pool, outbound packets are refused and
freed, so RX allocation and MQTT capture continue at full rate while the node
sheds repeat load it has no TX budget for anyway. Non-observer builds keep
upstream pool behavior via the same factory; StaticPoolPacketManager stays
byte-identical to upstream.
Completes the FEM RX-gain restoration begun in the CAD/prefs change, which
persisted radio_fem_rxgain but didn't yet drive the hardware. Also dropped
by the 22eb9b87 revert; restored to match upstream.
- MainBoard: setLoRaFemLnaEnabled()/canControlLoRaFemLna()/isLoRaFemLnaEnabled()
virtuals (default: can't control — non-FEM boards report unsupported)
- heltec_v4: board overrides driving loRaFEMControl; LoRaFEMControl gains the
isLNAEnabled() getter (it already tracked lna_enabled and drove the FEM)
- CLI: `set radio.fem.rxgain on/off` / `get radio.fem.rxgain` (guarded by
canControlLoRaFemLna, so it reports "unsupported" on non-FEM boards)
- app startup applies the persisted pref: board.setLoRaFemLnaEnabled(
_prefs.radio_fem_rxgain), beside setRxBoostedGainMode
Default is ON (upstream), so on FEM boards the LNA is enabled after upgrade —
a real reception behavior change to confirm on hardware. The other FEM
variants (heltec_t096/tower_v2/tracker_v2) need the same small board-override
addition; until then `radio.fem.rxgain` reports unsupported there (no
regression — status quo).
Builds: heltec_v4 repeater-observer + room-observer (FEM board), Heltec_v3
repeater (non-FEM, base virtuals no-op). NEEDS on-device validation on a
Heltec V4.
Continues restoring features dropped by the 22eb9b87 revert. Both were
upstream-tested code, not intentional fork removals.
CAD (hardware Channel Activity Detection / listen-before-talk before TX),
fully restored and functional:
- NodePrefs.cad_enabled + `set cad on/off` / `get cad` CLI (default off)
- RadioLibWrapper: _cad_enabled + setCADEnabled() + the scanChannel()/CAD
branch in isChannelActive() (Phase 1 already restored the Dispatcher hook)
- getCADEnabled() overrides in the repeater/room/sensor apps (return the
pref) and companion (always on, matching upstream)
radio_fem_rxgain: the NodePrefs field + /com_prefs persistence are restored
here at upstream's exact offsets (293 fem, 294 cad), which makes /com_prefs
byte-identical to upstream through the tail. The field is persisted and
defaults on (upstream default), but the per-board LNA *driving* + the
`radio.fem.rxgain` CLI are deferred to the FEM-hardware change (they depend
on board methods and want per-board bench testing).
The new-format /com_prefs tail grows from 3 to 5 bytes; the old-format
detection threshold and the host migration harness are updated accordingly
(all scenarios pass, incl. the non-MQTT-build variant).
Builds: Heltec_v3 repeater, repeater-observer, room-observer. (sensor /
plain-room / companion fail only on the pre-existing Timezone.h include
issue, unrelated to these changes.)
The `recv_pkt_region` is set when processing a flood packet in `filterRecvFloodPacket`
but direct/non-flood packets would never pass through that function, so the pointer was
not cleared for them.
`sendFloodReply` would then later use it blindly, which meant that the response would
either inherit the region from the last flood packet, or refer to a non-initialised pointer
if no region floods had been received yet.
Refactored the handling of observer-related settings by moving them from
NodePrefs to a new MQTTPrefs structure. This change centralizes MQTT,
WiFi, timezone, SNMP, and alert configurations, improving code organization
and maintainability. The new structure allows for better separation of
concerns and prepares the codebase for future enhancements.
Before this commit, there was no way to set a different max hop count
for unscoped messages.
Now with this change, by defaul it tracks the flood.max setting, until
a user provides a flood.max.unscoped value, which tax precidence for
packets if ROUTE_TYPE_FLOOD is true.
- Introduced two new MQTT presets: `meshcore-ca-1` and `meshcore-ca-2`.
- Updated documentation to reflect compile-time configuration options for MQTT defaults, including slot presets, IATA, and timezone settings.
- Removed legacy default MQTT settings from the code, now relying on the new configuration approach.
mikecarper