The discovery beacon previously re-announced at a random 3-10 min interval.
Replace that with a fixed, user-configurable cadence:
- OtaManager::advert_mins() — re-advertise every N minutes after the boot
burst; 0 disables periodic re-advertise (boot burst only). Default 24h.
- Persisted in NodePrefs (CommonCLI) and runtime-tunable: `ota config advert
<minutes>` (0..10080; 0 = off), and shown in `ota config`.
- When periodic advert is disabled, the scheduler still re-checks the config
on a slow timer, so a later `ota config advert <mins>` takes effect live.
Also advertise immediately whenever the served set changes — when a motatool
folder is attached to / detached from the ESP32 WiFi seeder — so peers learn
about newly-available firmware without waiting for the next interval (the
`ota folder` serial path already announced on attach).
Docs: protocol beacon-cadence note + user-guide `ota config advert`.
Extends the USB-serial folder relay to WiFi so an ESP32 companion can both
serve .mota and be operated headlessly:
- motatool `serve --tcp <host[:port]>`: a TcpTransport sibling of the serial
transport (default port 5001). SeederCore/Folder are reused unchanged — the
COUNT/DESCRIBE/READ protocol is transport-agnostic.
- ESP32 companion: a dedicated OTA seeder port (5001) for `serve --tcp`, plus
an OTA text console on 5002 (`nc <ip> 5002` -> `ota status|ls|announce|...`,
the same handle_ota_command CLI serial nodes have). Both run alongside the
phone-app port (5000); all three coexist.
- WiFi.setSleep(false): ESP32 STA mode's modem power-save periodically sleeps
the modem/CPU and stalls the SX1262 SPI+DIO servicing, leaving LoRa deaf
while WiFi is associated. Disabling it restores the radio (HW-validated:
a V3 WiFi companion is then discovered over LoRa and discovers its peers).
- docs: serving .mota over WiFi (protocol §10.2 + user guide).
Before this commit, there was no way to set a different max hop count
for unscoped messages.
Now with this change, by defaul it tracks the flood.max setting, until
a user provides a flood.max.unscoped value, which tax precidence for
packets if ROUTE_TYPE_FLOOD is true.
AUTO_OFF_MILLIS is a power-save feature aimed at battery use. When the
board reports isExternalPowered() == true (USB or other DC source),
blanking the screen serves no purpose — there's nothing to conserve.
But OLEDs are vulnerable to burn-in with static content, so this
behaviour is gated behind a new build flag KEEP_DISPLAY_ON_USB. Default
is unchanged from upstream — the display blanks after AUTO_OFF_MILLIS
on USB or battery. Variants that ship with an LCD instead of an OLED
(e.g. heltec_t096) can opt in by adding -D KEEP_DISPLAY_ON_USB to
their env, gaining always-on-while-powered without exposing OLED users
to burn-in risk.
When the flag is enabled, the implementation refreshes _auto_off every
loop iteration while externally powered, so the timer naturally counts
a fresh AUTO_OFF_MILLIS window from the moment power is removed —
no instantaneous-blank-on-unplug.
Applied to all three companion_radio UI flavours (ui-new, ui-tiny,
ui-orig). Boards without an isExternalPowered() override use the
base-class default in MeshCore.h (returns false), so battery-powered
behaviour is unchanged everywhere.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Framework for upcoming variant-specific PRs that add LED feedback during boot. The hook gives users visual cues that the device is busy and
shouldn't be interacted with until startup completes.
Valentin Kivachuk Burda