mirror of
https://github.com/mikecarper/MeshCore.git
synced 2026-10-29 00:03:41 +00:00
123 lines
4.0 KiB
INI
123 lines
4.0 KiB
INI
; M5Stack Cardputer-Adv (StampS3A, ESP32-S3, 8 MB) + Cap LoRa-1262 (SX1262).
|
|
; Pin map: docs.m5stack.com/en/cap/Cap_LoRa-1262 (EXT 2.54-14P header).
|
|
; Internal I2C (Wire1, G8/G9): TCA8418 keyboard, ES8311 codec and the Cap's
|
|
; PI4IOE5V6408 antenna switch. Wire is the Grove port (G2/G1).
|
|
; microSD (CS G12) shares the LoRa SPI bus.
|
|
; Companion builds use the keyboard/display UI adapted from
|
|
; MultiMote/meshcore-cardputer-adv (MIT); repeater/room builds are headless.
|
|
; TCXO 1.8 V verified on hardware (radio init + RX/TX on 910.525 MHz).
|
|
[M5Stack_Cardputer_Adv]
|
|
extends = esp32_base
|
|
board = m5stack-stamps3
|
|
board_check = true
|
|
board_build.mcu = esp32s3
|
|
board_build.partitions = default_8MB.csv
|
|
extra_scripts =
|
|
${esp32_base.extra_scripts}
|
|
pre:variants/m5stack_cardputer_adv/win_long_cmdline.py
|
|
build_flags = ${esp32_base.build_flags}
|
|
-I variants/m5stack_cardputer_adv
|
|
-I src/helpers/sensors
|
|
-D M5STACK_CARDPUTER_ADV
|
|
; StampS3 board JSON sets USB_MODE=1 but not CDC_ON_BOOT; without this the
|
|
; console/CLI is on UART0 pins instead of the USB-C port.
|
|
-D ARDUINO_USB_CDC_ON_BOOT=1
|
|
-D PIN_VBAT_READ=10
|
|
-D PIN_BOARD_SDA=2
|
|
-D PIN_BOARD_SCL=1
|
|
-D PIN_SD_CS=12
|
|
-D P_LORA_NSS=5
|
|
-D P_LORA_SCLK=40
|
|
-D P_LORA_MISO=39
|
|
-D P_LORA_MOSI=14
|
|
-D P_LORA_RESET=3
|
|
-D P_LORA_BUSY=6
|
|
-D P_LORA_DIO_1=4
|
|
-D PIN_GPS_RX=13
|
|
-D PIN_GPS_TX=15
|
|
-D GPS_BAUD_RATE=115200
|
|
-D SX126X_DIO2_AS_RF_SWITCH=true
|
|
-D SX126X_DIO3_TCXO_VOLTAGE=1.8
|
|
-D SX126X_CURRENT_LIMIT=140
|
|
-D SX126X_RX_BOOSTED_GAIN=1
|
|
-D USE_SX1262
|
|
-D MC_SX1262_SPI_HZ=8000000
|
|
-D RADIO_CLASS=CustomSX1262
|
|
-D WRAPPER_CLASS=CustomSX1262Wrapper
|
|
-D LORA_TX_POWER=22
|
|
build_src_filter = ${esp32_base.build_src_filter}
|
|
+<helpers/sensors/EnvironmentSensorManager.cpp>
|
|
+<../variants/m5stack_cardputer_adv/CardputerSensorManager.cpp>
|
|
+<../variants/m5stack_cardputer_adv/target.cpp>
|
|
lib_deps =
|
|
${esp32_base.lib_deps}
|
|
|
|
; Keyboard + display UI on top of the Cascade companion (CLI stays on USB).
|
|
[M5Stack_Cardputer_Adv_ui]
|
|
extends = M5Stack_Cardputer_Adv
|
|
build_flags =
|
|
${M5Stack_Cardputer_Adv.build_flags}
|
|
-I variants/m5stack_cardputer_adv/companion_radio
|
|
-I variants/m5stack_cardputer_adv/companion_radio/ui-cardputer
|
|
-I examples/companion_radio
|
|
-D CARDPUTER_ADV_UI=1
|
|
-D ENV_INCLUDE_GPS=1
|
|
-D AUTO_SHUTDOWN_MILLIVOLTS=3400
|
|
-D MESH_CONTACT_CACHE=1 ; retain all contacts while bounding resident paths/secrets
|
|
-D MAX_CONTACTS=350
|
|
-D MAX_GROUP_CHANNELS=40
|
|
-D OFFLINE_QUEUE_SIZE=256
|
|
-D ENABLE_USB_INTERFACE
|
|
build_src_filter = ${M5Stack_Cardputer_Adv.build_src_filter}
|
|
-<helpers/sensors/EnvironmentSensorManager.cpp>
|
|
+<helpers/esp32/*.cpp>
|
|
+<../examples/companion_radio/*.cpp>
|
|
+<../variants/m5stack_cardputer_adv/*.cpp>
|
|
+<../variants/m5stack_cardputer_adv/hw>
|
|
+<../variants/m5stack_cardputer_adv/companion_radio>
|
|
lib_deps =
|
|
${M5Stack_Cardputer_Adv.lib_deps}
|
|
densaugeo/base64 @ ~1.4.0
|
|
lovyan03/LovyanGFX @ ^1.2.24
|
|
adafruit/Adafruit TCA8418 @ ^1.0.2
|
|
stevemarple/MicroNMEA @ ^2.0.6
|
|
|
|
[env:M5Stack_Cardputer_Adv_repeater]
|
|
extends = M5Stack_Cardputer_Adv
|
|
build_src_filter = ${M5Stack_Cardputer_Adv.build_src_filter}
|
|
+<../examples/simple_repeater/*.cpp>
|
|
build_flags =
|
|
${M5Stack_Cardputer_Adv.build_flags}
|
|
-D ADVERT_NAME='"Cardputer Repeater"'
|
|
-D ADVERT_LAT=0.0
|
|
-D ADVERT_LON=0.0
|
|
-D ADMIN_PASSWORD='"password"'
|
|
-D MAX_NEIGHBOURS=50
|
|
lib_deps =
|
|
${M5Stack_Cardputer_Adv.lib_deps}
|
|
${esp32_ota.lib_deps}
|
|
|
|
[env:M5Stack_Cardputer_Adv_room_server]
|
|
extends = M5Stack_Cardputer_Adv
|
|
build_src_filter = ${M5Stack_Cardputer_Adv.build_src_filter}
|
|
+<../examples/simple_room_server>
|
|
build_flags =
|
|
${M5Stack_Cardputer_Adv.build_flags}
|
|
-D ADVERT_NAME='"Cardputer Room"'
|
|
-D ADVERT_LAT=0.0
|
|
-D ADVERT_LON=0.0
|
|
-D ADMIN_PASSWORD='"password"'
|
|
-D ROOM_PASSWORD='"hello"'
|
|
lib_deps =
|
|
${M5Stack_Cardputer_Adv.lib_deps}
|
|
${esp32_ota.lib_deps}
|
|
|
|
[env:M5Stack_Cardputer_Adv_companion_radio_usb]
|
|
extends = M5Stack_Cardputer_Adv_ui
|
|
|
|
[env:M5Stack_Cardputer_Adv_companion_radio_ble]
|
|
extends = M5Stack_Cardputer_Adv_ui
|
|
build_flags =
|
|
${M5Stack_Cardputer_Adv_ui.build_flags}
|
|
-D BLE_PIN_CODE=123456
|