HaloKeymind/examples/kiss_modem/main.cpp

#include <Arduino.h>
#include <target.h>
#include <helpers/ArduinoHelpers.h>
#include <helpers/IdentityGeneration.h>
#include <helpers/IdentityStore.h>
#include "KissModem.h"

#if defined(ESP32_PLATFORM)
  #include <helpers/ESP32TrueRandom.h>
#endif

#if defined(NRF52_PLATFORM)
  #include <InternalFileSystem.h>
#elif defined(RP2040_PLATFORM)
  #include <LittleFS.h>
#elif defined(ESP32)
  #include <SPIFFS.h>
#else
  #include <InternalFileSystem.h>
#endif

#if defined(KISS_UART_RX) && defined(KISS_UART_TX)
  #include <HardwareSerial.h>
#endif

#define NOISE_FLOOR_CALIB_INTERVAL_MS 2000
#define AGC_RESET_INTERVAL_MS 30000
#define USB_TX_TIMEOUT_MS 50
#define USB_TX_BUFFER_SIZE 1024

StdRNG rng;
mesh::LocalIdentity identity;
KissModem* modem;
static uint32_t next_noise_floor_calib_ms = 0;
static uint32_t next_agc_reset_ms = 0;

void halt() {
  while (1) ;
}

void loadOrCreateIdentity() {
#if defined(NRF52_PLATFORM) || defined(STM32_PLATFORM)
  InternalFS.begin();
  IdentityStore store(InternalFS, "");
#elif defined(ESP32)
  SPIFFS.begin(true);
  IdentityStore store(SPIFFS, "/identity");
#elif defined(RP2040_PLATFORM)
  LittleFS.begin();
  IdentityStore store(LittleFS, "/identity");
  store.begin();
#else
  #error "Filesystem not defined"
#endif

  const bool needs_identity = !store.load("_main", identity)
      || mesh::hasReservedIdentityPrefix(identity);
  bool identity_ready = true;
  if (needs_identity) {
    identity_ready = mesh::generateUsableLocalIdentity(identity, radio_new_identity);
    if (identity_ready) store.save("_main", identity);
  }

#if defined(ESP32_PLATFORM)
  mesh::discardESP32TrueRandom();
#endif
  if (!identity_ready) {
    MESH_DEBUG_PRINTLN("Identity generation exhausted all attempts; rebooting");
    board.reboot();
  }
}

void onSetRadio(float freq, float bw, uint8_t sf, uint8_t cr) {
  radio_driver.setParams(freq, bw, sf, cr);
}

void onSetTxPower(uint8_t power) {
  radio_driver.setTxPower(power);
}

float onGetCurrentRssi() {
  return radio_driver.getCurrentRSSI();
}

void onGetStats(uint32_t* rx, uint32_t* tx, uint32_t* errors) {
  *rx = radio_driver.getPacketsRecv();
  *tx = radio_driver.getPacketsSent();
  *errors = radio_driver.getPacketsRecvErrors();
}

void setup() {
  board.begin();

  int radioinit_attempts = 0;
  while (!radio_init()) {
    ++radioinit_attempts;
    MESH_DEBUG_PRINTLN("Radio init failed! (attempt %d)", radioinit_attempts);
    if (radioinit_attempts >= 3) {
      MESH_DEBUG_PRINTLN("Radio init failed 3x - rebooting");
      board.reboot();
    }
    delay(500);
  }

  radio_driver.begin();

  rng.begin(radio_driver.getRngSeed());
  loadOrCreateIdentity();

  sensors.begin();

#if defined(KISS_UART_RX) && defined(KISS_UART_TX)
#if defined(ESP32)
  Serial1.setPins(KISS_UART_RX, KISS_UART_TX);
  Serial1.begin(115200);
#elif defined(NRF52_PLATFORM)
  ((Uart *)&Serial1)->setPins(KISS_UART_RX, KISS_UART_TX);
  Serial1.begin(115200);
#elif defined(RP2040_PLATFORM)
  ((SerialUART *)&Serial1)->setRX(KISS_UART_RX);
  ((SerialUART *)&Serial1)->setTX(KISS_UART_TX);
  Serial1.begin(115200);
#elif defined(STM32_PLATFORM)
  ((HardwareSerial *)&Serial1)->setRx(KISS_UART_RX);
  ((HardwareSerial *)&Serial1)->setTx(KISS_UART_TX);
  Serial1.begin(115200);
#else
  #error "KISS UART not supported on this platform"
#endif
  modem = new KissModem(Serial1, identity, rng, radio_driver, board, sensors);
#else
  Serial.begin(115200);
  uint32_t start = millis();
  while (!Serial && millis() - start < 3000) delay(10);
  delay(100);
#if defined(ESP32) && ARDUINO_USB_MODE && ARDUINO_USB_CDC_ON_BOOT
  Serial.setTxTimeoutMs(USB_TX_TIMEOUT_MS);
  Serial.setTxBufferSize(USB_TX_BUFFER_SIZE);
#endif
  modem = new KissModem(Serial, identity, rng, radio_driver, board, sensors);
#endif

  modem->setRadioCallback(onSetRadio);
  modem->setTxPowerCallback(onSetTxPower);
  modem->setGetCurrentRssiCallback(onGetCurrentRssi);
  modem->setGetStatsCallback(onGetStats);
  modem->begin();

  board.onBootComplete();
}

void loop() {
#if defined(NRF52_PLATFORM)
  board.feedWatchdog();
#endif
  modem->loop();
  // GPS acquisition, cache refresh, and delayed shutdown are driven by the
  // sensor manager loop even though KISS itself is normally host powered.
  sensors.loop();
#ifdef TBEAM_1W
  board.updateFanControl();
#endif

  if (!modem->isActuallyTransmitting() && !modem->isHostOutputBackedUp()) {
    if (!modem->isTxBusy()) {
      if ((uint32_t)(millis() - next_agc_reset_ms) >= AGC_RESET_INTERVAL_MS) {
        radio_driver.resetAGC();
        next_agc_reset_ms = millis();
      }
    }

    uint8_t rx_buf[256];
    int rx_len = radio_driver.recvRaw(rx_buf, sizeof(rx_buf));
    if (rx_len > 0) {
      int8_t snr = (int8_t)(radio_driver.getLastSNR() * 4);
      int8_t rssi = (int8_t)radio_driver.getLastRSSI();
      modem->onPacketReceived(snr, rssi, rx_buf, rx_len);
    }
  }

  if ((uint32_t)(millis() - next_noise_floor_calib_ms) >= NOISE_FLOOR_CALIB_INTERVAL_MS) {
    radio_driver.triggerNoiseFloorCalibrate(0);
    next_noise_floor_calib_ms = millis();
  }
  radio_driver.loop();
}