dandri/HaloKeymind
1
0
Fork 0
mirror of https://github.com/mikecarper/MeshCore.git synced 2026-07-23 23:41:02 +00:00
Code Issues Packages Projects Releases Wiki Activity
Files
ceeec4b1da5b1af524a0e54761ba57413b0e90e4
HaloKeymind/platformio.ini
T

214 lines
7.4 KiB
INI
Raw Blame History

; PlatformIO Project Configuration File
;
; Build options: build flags, source filter
; Upload options: custom upload port, speed and extra flags
; Library options: dependencies, extra library storages
; Advanced options: extra scripting
;
; Please visit documentation for the other options and examples
; https://docs.platformio.org/page/projectconf.html
[platformio]
extra_configs =
variants/*/platformio.ini
platformio.local.ini
[arduino_base]
framework = arduino
monitor_speed = 115200
lib_deps =
SPI
Wire
;jgromes/RadioLib @ ^7.7.1
https://github.com/jgromes/RadioLib.git#6d8934836678d8894e3d556550475b37dce3e2b6
rweather/Crypto @ ^0.4.0
adafruit/RTClib @ ^2.1.3
melopero/Melopero RV3028 @ ^1.1.0
electroniccats/CayenneLPP @ 1.6.1
build_flags = -w -DNDEBUG -DRADIOLIB_STATIC_ONLY=1 -DRADIOLIB_GODMODE=1
-D LORA_FREQ=869.618
-D LORA_BW=62.5
-D LORA_SF=8
-D ENABLE_ADVERT_ON_BOOT=1
-D ENABLE_PRIVATE_KEY_IMPORT=1 ; NOTE: comment these out for more secure firmware
-D ENABLE_PRIVATE_KEY_EXPORT=1
-D RADIOLIB_EXCLUDE_CC1101=1
-D RADIOLIB_EXCLUDE_RF69=1
-D RADIOLIB_EXCLUDE_SX1231=1
-D RADIOLIB_EXCLUDE_SI443X=1
-D RADIOLIB_EXCLUDE_RFM2X=1
-D RADIOLIB_EXCLUDE_SX128X=1
-D RADIOLIB_EXCLUDE_AFSK=1
-D RADIOLIB_EXCLUDE_AX25=1
-D RADIOLIB_EXCLUDE_HELLSCHREIBER=1
-D RADIOLIB_EXCLUDE_MORSE=1
-D RADIOLIB_EXCLUDE_APRS=1
-D RADIOLIB_EXCLUDE_BELL=1
-D RADIOLIB_EXCLUDE_RTTY=1
-D RADIOLIB_EXCLUDE_SSTV=1
build_src_filter =
+<*.cpp>
+<helpers/*.cpp>
+<helpers/radiolib/*.cpp>
+<helpers/bridges/BridgeBase.cpp>
+<helpers/ui/MomentaryButton.cpp>
; ----------------- ESP32 ---------------------
[esp32_base]
extends = arduino_base
platform = platformio/espressif32@6.11.0
monitor_filters = esp32_exception_decoder
; OTA is available on every ESP32 variant (A/B via esp_ota; the detools-sequential apply decodes into the
; inactive slot). The received .mota is staged in the INACTIVE OTA slot (OtaStoreFlashEsp32), not RAM, so
; deltas/full images of any size fetch over the air (RX-safe, sector-coalesced). The build always includes
; it; for `applydelta` to actually run, the board must use a dual-app/OTA partition table
; (board_build.partitions) with two app slots + otadata (boards without one fetch-refuse cleanly).
; pio_endf appends the EndF self-identity trailer. (nRF52 single-slot OTA is enabled per-board, not here —
; it needs a custom bootloader; RP2040/STM32 have no A/B path yet.)
extra_scripts = merge-bin.py
post:tools/mota/pio_endf.py
build_flags = ${arduino_base.build_flags}
-D ESP32_PLATFORM
-D OTA_FLASH_STORE=1
-D OTA_FOLDER_SERIAL ; `ota folder on` relays a host folder of .mota over the USB console (no extra HW)
; -D ESP32_CPU_FREQ=80 ; change it to your need
build_src_filter = ${arduino_base.build_src_filter}
+<helpers/ota/*.cpp>
+<helpers/ota/detools/detools.c>
[esp32_ota]
lib_deps =
ESP32Async/ESPAsyncWebServer @ 3.10.3
file://arch/esp32/AsyncElegantOTA
; esp32c6 uses arduino framework 3.x
; WARNING: experimental. May not work as stable as other platforms.
[esp32c6_base]
extends = esp32_base
platform = https://github.com/pioarduino/platform-espressif32/releases/download/53.03.13-1/platform-espressif32.zip
; ----------------- NRF52 ---------------------
[nrf52_base]
extends = arduino_base
platform = nordicnrf52
platform_packages =
; use internal fork that includes patch to ble stack to prevent firmware lockup during rapid connect/disconnect
; https://github.com/meshcore-dev/MeshCore/pull/1177
; https://github.com/meshcore-dev/MeshCore/pull/1295
framework-arduinoadafruitnrf52 @ https://github.com/meshcore-dev/Adafruit_nRF52_Arduino#d541301
extra_scripts = create-uf2.py
build_flags = ${arduino_base.build_flags}
-D NRF52_PLATFORM
-D LFS_NO_ASSERT=1
-D EXTRAFS=1
lib_deps =
${arduino_base.lib_deps}
https://github.com/oltaco/CustomLFS#0.2.2
; Shared OTA recipe for board=rak4631-hardware nRF52 variants. nRF52840 has no A/B slot, so the update is
; applied in place by the custom OTAFIX bootloader (in-place detools); the app only stages + verifies +
; approves it. Reuses the RAK4631 flash layout (src/helpers/ota/OtaFlashLayout_nrf52.h; FS_START 0xD4000
; is the safe staging ceiling for every RAK4631 role/ldscript). The device must run the matching OTAFIX
; bootloader for `applydelta` to actually apply. (detools.c is intentionally NOT built into the app —
; only the bootloader decodes.) The [rak4631] base defines this same recipe inline because it carries
; board-specific extras (fix_bsec_lib.py, BSEC lib) and a fixed post-script order; the simpler RAK4631
; variants below just extend this section.
[rak4631_hw]
extends = nrf52_base
extra_scripts = ${nrf52_base.extra_scripts}
post:tools/mota/pio_endf.py
build_flags = ${nrf52_base.build_flags}
-D OTA_FLASH_STORE=1
-D OTA_FOLDER_SERIAL ; `ota folder on` relays a host folder of .mota over the USB console (no extra HW)
build_src_filter = ${nrf52_base.build_src_filter}
+<helpers/ota/*.cpp>
lib_deps = ${nrf52_base.lib_deps}
; ----------------- RP2040 ---------------------
[rp2040_base]
extends = arduino_base
upload_protocol = picotool
board_build.core = earlephilhower
platform = https://github.com/maxgerhardt/platform-raspberrypi.git#4e22a0d ; framework-arduinopico @ 1.50600.0+sha.6a1d13e9
build_flags = ${arduino_base.build_flags}
-D RP2040_PLATFORM
; ----------------- STM32 ----------------------
[stm32_base]
extends = arduino_base
platform = ststm32
extra_scripts = post:arch/stm32/build_hex.py
build_flags = ${arduino_base.build_flags}
-D STM32_PLATFORM
-I src/helpers/stm32
-I $PROJECT_PACKAGES_DIR/framework-arduinoststm32/libraries/SubGhz/src
build_src_filter = ${arduino_base.build_src_filter}
+<helpers/stm32>
lib_deps = ${arduino_base.lib_deps}
file://arch/stm32/Adafruit_LittleFS_stm32
SubGhz
[sensor_base]
build_flags =
-D ENV_INCLUDE_GPS=1
-D ENV_INCLUDE_AHTX0=1
-D ENV_INCLUDE_BME280=1
-D ENV_INCLUDE_BMP280=1
-D ENV_INCLUDE_SHTC3=1
-D ENV_INCLUDE_SHT4X=1
-D ENV_INCLUDE_LPS22HB=1
-D ENV_INCLUDE_INA3221=1
-D ENV_INCLUDE_INA219=1
-D ENV_INCLUDE_INA226=1
-D ENV_INCLUDE_INA260=1
-D ENV_INCLUDE_MLX90614=1
-D ENV_INCLUDE_VL53L0X=1
-D ENV_INCLUDE_BME680=1
-D ENV_INCLUDE_BMP085=1
lib_deps =
adafruit/Adafruit INA3221 Library @ ^1.0.1
adafruit/Adafruit INA219 @ ^1.2.3
robtillaart/INA226 @ ^0.6.4
adafruit/Adafruit INA260 Library @ ^1.5.3
adafruit/Adafruit AHTX0 @ ^2.0.5
adafruit/Adafruit BME280 Library @ ^2.3.0
adafruit/Adafruit BMP280 Library @ ^2.6.8
adafruit/Adafruit SHTC3 Library @ ^1.0.1
sensirion/Sensirion I2C SHT4x @ ^1.1.2
arduino-libraries/Arduino_LPS22HB @ ^1.0.2
adafruit/Adafruit MLX90614 Library @ ^2.1.5
adafruit/Adafruit_VL53L0X @ ^1.2.4
stevemarple/MicroNMEA @ ^2.0.6
adafruit/Adafruit BME680 Library @ ^2.0.4
adafruit/Adafruit BMP085 Library @ ^1.2.4
; ----------------- TESTING ---------------------
[env:native]
platform = native
test_framework = googletest
build_flags = -std=c++17
-I src
-I test/mocks
test_build_src = yes
build_src_filter =
-<*>
+<../src/Utils.cpp>
+<../src/Packet.cpp>
+<../src/Dispatcher.cpp>
+<../src/Identity.cpp>
+<../src/Mesh.cpp>
+<../src/helpers/StaticPoolPacketManager.cpp>
+<../src/helpers/ota/MerkleTree.cpp>
+<../src/helpers/ota/MotaContainer.cpp>
+<../src/helpers/ota/FirmwareInfo.cpp>
+<../src/helpers/ota/OtaProtocol.cpp>
+<../src/helpers/ota/OtaManager.cpp>
+<../src/helpers/ota/detools/detools.c>
lib_deps =
google/googletest @ 1.17.0
Reference in New Issue View Git Blame Copy Permalink