Files
HaloKeymind/src/Dispatcher.h
T
agessaman aba571ed7d feat(mqtt): enhance neighbor discovery with request management
Add functionality to manage neighbor discovery requests in MyMesh.
This includes handling the status of requests, updating the state
upon transmission success or failure, and implementing a timeout
mechanism for neighbor discovery queries. The changes improve the
efficiency and reliability of neighbor discovery operations in
MQTT-enabled environments.
2026-07-26 14:03:04 -07:00

234 lines
7.3 KiB
C++

#pragma once
#include <MeshCore.h>
#include <Identity.h>
#include <Packet.h>
#include <Utils.h>
#include <string.h>
namespace mesh {
/**
* \brief Abstraction of local/volatile clock with Millisecond granularity.
*/
class MillisecondClock {
public:
virtual unsigned long getMillis() = 0;
};
/**
* \brief Abstraction of this device's packet radio.
*/
class Radio {
public:
virtual void begin() { }
/**
* \brief polls for incoming raw packet.
* \param bytes destination to store incoming raw packet.
* \param sz maximum packet size allowed.
* \returns 0 if no incoming data, otherwise length of complete packet received.
*/
virtual int recvRaw(uint8_t* bytes, int sz) = 0;
/**
* \returns estimated transmit air-time needed for packet of 'len_bytes', in milliseconds.
*/
virtual uint32_t getEstAirtimeFor(int len_bytes) = 0;
virtual float packetScore(float snr, int packet_len) = 0;
/**
* \brief starts the raw packet send. (no wait)
* \param bytes the raw packet data
* \param len the length in bytes
* \returns true if successfully started
*/
virtual bool startSendRaw(const uint8_t* bytes, int len) = 0;
/**
* \returns true if the previous 'startSendRaw()' completed successfully.
*/
virtual bool isSendComplete() = 0;
/**
* \brief a hook for doing any necessary clean up after transmit.
*/
virtual void onSendFinished() = 0;
/**
* \brief do any processing needed on each loop cycle
*/
virtual void loop() { }
virtual void idle() { }
virtual void startRecv() { }
virtual int getNoiseFloor() const { return 0; }
virtual void triggerNoiseFloorCalibrate(int threshold) { }
virtual void setCADEnabled(bool enable) { }
virtual void resetAGC() { }
virtual uint8_t getRadioState() const { return 0; }
virtual unsigned long getLastRecvMillis() const { return 0; }
virtual unsigned long getLastRadioInterruptMillis() const { return 0; }
virtual bool isInRecvMode() const = 0;
/**
* \returns true if the radio is currently mid-receive of a packet.
*/
virtual bool isReceiving() { return false; }
virtual float getLastRSSI() const { return 0; }
virtual float getLastSNR() const { return 0; }
/**
* \returns number of receive errors (e.g. CRC failures) since last reset; 0 if not tracked.
*/
virtual uint32_t getPacketsRecvErrors() const { return 0; }
};
/**
* \brief An abstraction for managing instances of Packets (eg. in a static pool),
* and for managing the outbound packet queue.
*/
class PacketManager {
public:
virtual Packet* allocNew() = 0;
virtual void free(Packet* packet) = 0;
virtual void queueOutbound(Packet* packet, uint8_t priority, uint32_t scheduled_for) = 0;
virtual Packet* getNextOutbound(uint32_t now) = 0; // by priority
virtual int getOutboundCount(uint32_t now) const = 0;
virtual int getOutboundTotal() const = 0;
virtual int getFreeCount() const = 0;
virtual Packet* getOutboundByIdx(int i) = 0;
virtual Packet* removeOutboundByIdx(int i) = 0;
virtual void queueInbound(Packet* packet, uint32_t scheduled_for) = 0;
virtual Packet* getNextInbound(uint32_t now) = 0;
};
typedef uint32_t DispatcherAction;
#define ACTION_RELEASE (0)
#define ACTION_MANUAL_HOLD (1)
#define ACTION_RETRANSMIT(pri) (((uint32_t)1 + (pri))<<24)
#define ACTION_RETRANSMIT_DELAYED(pri, _delay) ((((uint32_t)1 + (pri))<<24) | (_delay))
#define ERR_EVENT_FULL (1 << 0)
#define ERR_EVENT_CAD_TIMEOUT (1 << 1)
#define ERR_EVENT_STARTRX_TIMEOUT (1 << 2)
#define ERR_EVENT_RADIO_WATCHDOG (1 << 3)
#ifndef RADIO_WATCHDOG_MS
#define RADIO_WATCHDOG_MS 300000 // 5 minutes
#endif
/**
* \brief The low-level task that manages detecting incoming Packets, and the queueing
* and scheduling of outbound Packets.
*/
class Dispatcher {
Packet* outbound; // current outbound packet
unsigned long outbound_expiry, outbound_start, total_air_time, rx_air_time;
unsigned long last_watchdog_recovery;
unsigned long last_radio_active_ms; // updated on any TX or RX event; used by watchdog
unsigned long next_tx_time;
unsigned long cad_busy_start;
unsigned long radio_nonrx_start;
unsigned long next_floor_calib_time, next_agc_reset_time;
bool prev_isrecv_mode;
uint32_t n_sent_flood, n_sent_direct;
uint32_t n_recv_flood, n_recv_direct;
unsigned long tx_budget_ms;
unsigned long last_budget_update;
unsigned long duty_cycle_window_ms;
void processRecvPacket(Packet* pkt);
void updateTxBudget();
protected:
PacketManager* _mgr;
Radio* _radio;
MillisecondClock* _ms;
uint16_t _err_flags;
Dispatcher(Radio& radio, MillisecondClock& ms, PacketManager& mgr)
: _radio(&radio), _ms(&ms), _mgr(&mgr)
{
outbound = NULL;
total_air_time = rx_air_time = 0;
next_tx_time = ms.getMillis();
cad_busy_start = 0;
next_floor_calib_time = next_agc_reset_time = 0;
_err_flags = 0;
radio_nonrx_start = 0;
prev_isrecv_mode = true;
tx_budget_ms = 0;
last_budget_update = 0;
duty_cycle_window_ms = 3600000;
last_watchdog_recovery = 0;
last_radio_active_ms = 0;
}
virtual DispatcherAction onRecvPacket(Packet* pkt) = 0;
virtual void logRxRaw(float snr, float rssi, const uint8_t raw[], int len) { } // custom hook
virtual void logRx(Packet* packet, int len, float score) { } // hooks for custom logging
virtual void logTx(Packet* packet, int len) { }
virtual void logTxFail(Packet* packet, int len) { }
virtual const char* getLogDateTime() { return ""; }
virtual float getAirtimeBudgetFactor() const;
virtual int calcRxDelay(float score, uint32_t air_time) const;
virtual uint32_t getCADFailRetryDelay() const;
virtual uint32_t getCADFailMaxDuration() const;
virtual int getInterferenceThreshold() const { return 0; } // disabled by default
virtual bool getCADEnabled() const { return false; } // hardware CAD disabled by default
virtual int getAGCResetInterval() const { return 0; } // disabled by default
virtual unsigned long getDutyCycleWindowMs() const { return 3600000; }
#ifdef WITH_MQTT_BRIDGE
virtual uint32_t getRadioWatchdogMillis() const; // observer-only radio recovery
#endif
public:
void begin();
void loop();
Packet* obtainNewPacket();
void releasePacket(Packet* packet);
void sendPacket(Packet* packet, uint8_t priority, uint32_t delay_millis=0);
unsigned long getTotalAirTime() const { return total_air_time; }
unsigned long getReceiveAirTime() const {return rx_air_time; }
unsigned long getRemainingTxBudget() const { return tx_budget_ms; }
uint32_t getNumSentFlood() const { return n_sent_flood; }
uint32_t getNumSentDirect() const { return n_sent_direct; }
uint32_t getNumRecvFlood() const { return n_recv_flood; }
uint32_t getNumRecvDirect() const { return n_recv_direct; }
uint16_t getErrFlags() const { return _err_flags; } // Get error flags
bool hasOutbound() const { return outbound != NULL; }
bool isCurrentOutbound(const Packet* packet) const { return outbound == packet; }
void resetStats() {
n_sent_flood = n_sent_direct = n_recv_flood = n_recv_direct = 0;
_err_flags = 0;
}
// helper methods
bool millisHasNowPassed(unsigned long timestamp) const;
unsigned long futureMillis(int millis_from_now) const;
bool tryParsePacket(Packet* pkt, const uint8_t* raw, int len);
private:
void checkRecv();
void checkSend();
};
}