dandri/HaloKeymind
1
0
Fork 0
mirror of https://github.com/mikecarper/MeshCore.git synced 2026-07-28 11:49:27 +00:00
Code Issues Packages Projects Releases Wiki Activity
Files
d5a00da2a0b56e7fcb328df6561d62deeb7fb58d
HaloKeymind/examples/companion_radio/main.cpp
T

624 lines
22 KiB
C++
Raw Blame History

#include <Arduino.h> // needed for PlatformIO
#include <Mesh.h>
#include "MyMesh.h"
#ifdef ESP32_PLATFORM
#include "esp_pm.h"
#include "esp_bt.h"
#endif
// Believe it or not, this std C function is busted on some platforms!
static uint32_t _atoi(const char* sp) {
uint32_t n = 0;
while (*sp && *sp >= '0' && *sp <= '9') {
n *= 10;
n += (*sp++ - '0');
}
return n;
}
#if defined(NRF52_PLATFORM) || defined(STM32_PLATFORM)
#include <InternalFileSystem.h>
#if defined(QSPIFLASH)
#include <CustomLFS_QSPIFlash.h>
DataStore store(InternalFS, QSPIFlash, rtc_clock);
#else
#if defined(EXTRAFS)
#include <CustomLFS.h>
CustomLFS ExtraFS(0xD4000, 0x19000, 128);
DataStore store(InternalFS, ExtraFS, rtc_clock);
#else
DataStore store(InternalFS, rtc_clock);
#endif
#endif
#elif defined(RP2040_PLATFORM)
#include <LittleFS.h>
DataStore store(LittleFS, rtc_clock);
#elif defined(ESP32)
#include <SPIFFS.h>
DataStore store(SPIFFS, rtc_clock);
#endif
#ifdef ESP32
#ifdef WIFI_SSID
#include <helpers/esp32/SerialWifiInterface.h>
#include <helpers/WiFiSetupPortal.h>
SerialWifiInterface serial_interface;
#ifndef TCP_PORT
#define TCP_PORT 5000
#endif
#ifndef WIFI_PWD
#define WIFI_PWD ""
#endif
#elif defined(BLE_PIN_CODE)
#include <helpers/esp32/SerialBLEInterface.h>
SerialBLEInterface serial_interface;
#elif defined(SERIAL_RX)
#include <helpers/ArduinoSerialInterface.h>
ArduinoSerialInterface serial_interface;
HardwareSerial companion_serial(1);
#else
#include <helpers/ArduinoSerialInterface.h>
ArduinoSerialInterface serial_interface;
#endif
#elif defined(RP2040_PLATFORM)
//#ifdef WIFI_SSID
// #include <helpers/rp2040/SerialWifiInterface.h>
// SerialWifiInterface serial_interface;
// #ifndef TCP_PORT
// #define TCP_PORT 5000
// #endif
// #elif defined(BLE_PIN_CODE)
// #include <helpers/rp2040/SerialBLEInterface.h>
// SerialBLEInterface serial_interface;
#if defined(SERIAL_RX)
#include <helpers/ArduinoSerialInterface.h>
ArduinoSerialInterface serial_interface;
HardwareSerial companion_serial(1);
#else
#include <helpers/ArduinoSerialInterface.h>
ArduinoSerialInterface serial_interface;
#endif
#elif defined(NRF52_PLATFORM)
#ifdef BLE_PIN_CODE
#include <helpers/nrf52/SerialBLEInterface.h>
SerialBLEInterface serial_interface;
#elif defined(ETHERNET_ENABLED)
#include <helpers/nrf52/SerialEthernetInterface.h>
SerialEthernetInterface serial_interface;
#else
#include <helpers/ArduinoSerialInterface.h>
ArduinoSerialInterface serial_interface;
#endif
#elif defined(STM32_PLATFORM)
#include <helpers/ArduinoSerialInterface.h>
ArduinoSerialInterface serial_interface;
#else
#error "need to define a serial interface"
#endif
/* GLOBAL OBJECTS */
#ifdef DISPLAY_CLASS
#include "UITask.h"
UITask ui_task(&board, &serial_interface);
#endif
StdRNG fast_rng;
SimpleMeshTables tables;
MyMesh the_mesh(radio_driver, fast_rng, rtc_clock, tables, store
#ifdef DISPLAY_CLASS
, &ui_task
#endif
);
/* END GLOBAL OBJECTS */
void halt() {
while (1) ;
}
/* WIFI RECONNECT TRACKERS */
#if defined(ESP32) && defined(WIFI_SSID)
static const unsigned long WIFI_SETUP_FALLBACK_MS = 120000UL;
static const char COMPANION_WIFI_SETUP_AP[] = "MeshCore-Setup";
bool wifi_needs_reconnect = false;
unsigned long last_wifi_reconnect_attempt = 0;
unsigned long wifi_disconnected_since = 0;
bool wifi_setup_recovery_mode = false;
static char configured_wifi_ssid[32];
static char configured_wifi_password[64];
#if defined(WITH_WEBCONFIG) && defined(DISPLAY_CLASS)
static DisplayDriver* companion_setup_display = nullptr;
static unsigned long companion_setup_display_refresh = 0;
static void renderCompanionSetupDisplay() {
if (!companion_setup_display
|| static_cast<int32_t>(millis() - companion_setup_display_refresh) < 0) return;
companion_setup_display_refresh = millis() + 1000;
companion_setup_display->turnOn();
companion_setup_display->startFrame();
companion_setup_display->setTextSize(1);
companion_setup_display->setColor(DisplayDriver::LIGHT);
char setup_ssid[33] = {0};
char setup_ip[16] = {0};
if (WebConfigServer::getSetupInfo(setup_ssid, sizeof(setup_ssid),
setup_ip, sizeof(setup_ip))) {
companion_setup_display->drawTextCentered(
companion_setup_display->width() / 2, 0, "WebUI setup");
companion_setup_display->setCursor(0, 14);
companion_setup_display->print("Join open WiFi:");
companion_setup_display->drawTextEllipsized(
0, 25, companion_setup_display->width(), setup_ssid);
companion_setup_display->setCursor(0, 39);
companion_setup_display->print("Open in browser:");
companion_setup_display->drawTextCentered(
companion_setup_display->width() / 2, 51, setup_ip);
} else if (WiFi.status() == WL_CONNECTED) {
companion_setup_display->drawTextCentered(
companion_setup_display->width() / 2, 0, "WebUI");
companion_setup_display->setCursor(0, 14);
companion_setup_display->print("Join WiFi:");
companion_setup_display->drawTextEllipsized(
0, 25, companion_setup_display->width(), configured_wifi_ssid);
companion_setup_display->setCursor(0, 39);
companion_setup_display->print("Open in browser:");
const String ip = WiFi.localIP().toString();
companion_setup_display->drawTextCentered(
companion_setup_display->width() / 2, 51, ip.c_str());
} else {
companion_setup_display->drawTextCentered(
companion_setup_display->width() / 2, 8, "WiFi connecting");
companion_setup_display->setCursor(0, 25);
companion_setup_display->print("SSID:");
companion_setup_display->drawTextEllipsized(
0, 38, companion_setup_display->width(), configured_wifi_ssid);
companion_setup_display->drawTextCentered(
companion_setup_display->width() / 2, 52, "Please wait...");
}
companion_setup_display->endFrame();
}
#endif
static bool saveCompanionWiFi(void*, const char* ssid, const char* password) {
if (!WiFiSetupPortal::saveStoredCredentials(ssid, password)) return false;
strncpy(configured_wifi_ssid, ssid, sizeof(configured_wifi_ssid) - 1);
configured_wifi_ssid[sizeof(configured_wifi_ssid) - 1] = '\0';
strncpy(configured_wifi_password, password ? password : "", sizeof(configured_wifi_password) - 1);
configured_wifi_password[sizeof(configured_wifi_password) - 1] = '\0';
return true;
}
#endif
/* WIFI OTA SEEDER — relay a host folder of .mota over WiFi (motatool `serve --tcp`), on a DEDICATED port
separate from the companion (TCP_PORT), so a phone app stays connected while motatool feeds updates. */
#if defined(ESP32) && defined(WIFI_SSID) && defined(ENABLE_OTA)
#include <helpers/ota/OtaContext.h>
#include <helpers/ota/MotaSourceSerial.h>
#include <helpers/ota/FolderMotaStore.h> // `ota pull <#> folder` destination over this same connection
#ifndef OTA_SEEDER_TCP_PORT
#define OTA_SEEDER_TCP_PORT 5001
#endif
static WiFiServer ota_seeder_server(OTA_SEEDER_TCP_PORT);
static WiFiClient ota_seeder_client; // the live seeder connection (reused)
static mesh::ota::SerialMotaSource ota_seeder_source(ota_seeder_client, 3000); // SERVE: read folder -> relay
static mesh::ota::FolderMotaStore ota_folder_store(ota_seeder_client, 3000); // PULL: capture .mota -> folder
static bool ota_seeder_attached = false;
// Accept one motatool connection at a time. While connected, the same link both SERVES the host folder
// over LoRa (register it as a source) and is offered as a `folder` PULL destination (`ota pull <#> folder`
// captures a fetched .mota back to that folder). Drop both the moment the connection closes.
static void ota_seeder_loop() {
if (ota_seeder_client && ota_seeder_client.connected()) return; // still serving the current client
if (ota_seeder_attached) { // previous client just disconnected
mesh::ota::ota_ctx().detach_folder();
mesh::ota::ota_ctx().clear_folder_dest(); // the `folder` pull destination is gone too
mesh::ota::ota_ctx().manager.announce(); // served set shrank back to our own fw -> re-advertise
ota_seeder_attached = false;
WIFI_DEBUG_PRINTLN("OTA seeder: client disconnected, relay stopped");
}
WiFiClient c = ota_seeder_server.available();
if (c) {
ota_seeder_client = c; // rebind the persistent Stream to it
if (mesh::ota::ota_ctx().manager.add_source(&ota_seeder_source)) {
ota_seeder_attached = true;
char di[24]; snprintf(di, sizeof di, "tcp %s", ota_seeder_client.remoteIP().toString().c_str());
mesh::ota::ota_ctx().set_folder_dest(&ota_folder_store, di); // offer `ota pull <#> folder`
// if a folder pull PAUSED when the link dropped, the host still holds the partial: rescan + resume
if (mesh::ota::ota_ctx().manager.fetchState() == mesh::ota::OtaManager::PAUSED)
mesh::ota::ota_ctx().manager.resumeStaged(nullptr);
mesh::ota::ota_ctx().manager.announce(); // new served set -> advertise the folder's fw to peers
WIFI_DEBUG_PRINTLN("OTA seeder: client connected (%s) — relay + folder pull-dest ready", di);
} else {
ota_seeder_client.stop(); // no free source slot
}
}
}
#endif
/* WIFI OTA CONSOLE — a tiny text CLI for OTA over WiFi. A WiFi companion has no serial text console, so
without this its OTA is only reachable through the phone app. Connect with e.g. `nc <ip> 5002` and type
`ota status` / `ota ls` / `ota announce` / ... — one client at a time, on a DEDICATED port separate from
the companion (5000) and the seeder (5001). */
#if defined(ESP32) && defined(WIFI_SSID) && defined(ENABLE_OTA)
#include <helpers/ota/OtaCli.h> // mesh::ota::handle_ota_command(line, reply, board)
#ifndef OTA_CONSOLE_TCP_PORT
#define OTA_CONSOLE_TCP_PORT 5002
#endif
static WiFiServer ota_console_server(OTA_CONSOLE_TCP_PORT);
static WiFiClient ota_console_client;
static char ota_console_line[128];
static uint8_t ota_console_len = 0;
static void ota_console_loop() {
if (!ota_console_client || !ota_console_client.connected()) {
WiFiClient c = ota_console_server.available();
if (c) { ota_console_client = c; ota_console_len = 0;
ota_console_client.print("OTA console — type `ota ...` (e.g. ota status / ota ls / ota announce)\r\n> "); }
return;
}
while (ota_console_client.available()) {
char ch = (char)ota_console_client.read();
if (ch == '\r' || ch == '\n') {
if (ota_console_len == 0) continue; // ignore blanks / the CRLF pair
ota_console_line[ota_console_len] = 0;
char reply[160]; reply[0] = 0;
if (!mesh::ota::handle_ota_command(ota_console_line, reply, board))
strcpy(reply, "only `ota ...` commands are supported on this console");
ota_console_client.print(" -> "); ota_console_client.print(reply); ota_console_client.print("\r\n> ");
ota_console_len = 0;
} else if (ota_console_len < sizeof(ota_console_line) - 1) {
ota_console_line[ota_console_len++] = ch;
}
}
}
#endif
void setup() {
Serial.begin(115200);
board.begin();
#ifdef HAS_EXTERNAL_WATCHDOG
external_watchdog.begin();
#endif
#ifdef DISPLAY_CLASS
DisplayDriver* disp = NULL;
if (display.begin()) {
disp = &display;
#if defined(ESP32) && defined(WIFI_SSID) && defined(WITH_WEBCONFIG)
companion_setup_display = disp;
#endif
disp->startFrame();
#ifdef ST7789
disp->setTextSize(2);
#endif
disp->drawTextCentered(disp->width() / 2, 28, "Loading...");
disp->endFrame();
}
#endif
if (!radio_init()) { halt(); }
fast_rng.begin(radio_driver.getRngSeed());
#if defined(NRF52_PLATFORM) || defined(STM32_PLATFORM)
InternalFS.begin();
#if defined(QSPIFLASH)
if (!QSPIFlash.begin()) {
// debug output might not be available at this point, might be too early. maybe should fall back to InternalFS here?
MESH_DEBUG_PRINTLN("CustomLFS_QSPIFlash: failed to initialize");
} else {
MESH_DEBUG_PRINTLN("CustomLFS_QSPIFlash: initialized successfully");
}
#else
#if defined(EXTRAFS)
ExtraFS.begin();
#endif
#endif
store.begin();
the_mesh.begin(
#ifdef DISPLAY_CLASS
disp != NULL
#else
false
#endif
);
#ifdef BLE_PIN_CODE
serial_interface.begin(BLE_NAME_PREFIX, the_mesh.getNodePrefs()->node_name, the_mesh.getBLEPin());
the_mesh.startInterface(serial_interface);
#elif defined(ETHERNET_ENABLED)
Serial.print("Waiting for serial to connect...\n");
unsigned long timeout = millis();
while (!Serial) {
if ((millis() - timeout) < 5000) { delay(100); } else { break; }
}
Serial.println("Initializing Ethernet adapter...");
if (serial_interface.begin()) {
the_mesh.startInterface(serial_interface);
} else {
Serial.println("ETH: Init failed, continuing without Ethernet (mesh only)");
}
#else
serial_interface.begin(Serial);
the_mesh.startInterface(serial_interface);
#endif
#elif defined(RP2040_PLATFORM)
LittleFS.begin();
store.begin();
the_mesh.begin(
#ifdef DISPLAY_CLASS
disp != NULL
#else
false
#endif
);
//#ifdef WIFI_SSID
// WiFi.begin(WIFI_SSID, WIFI_PWD);
// serial_interface.begin(TCP_PORT);
// #elif defined(BLE_PIN_CODE)
// char dev_name[32+16];
// sprintf(dev_name, "%s%s", BLE_NAME_PREFIX, the_mesh.getNodeName());
// serial_interface.begin(dev_name, the_mesh.getBLEPin());
#if defined(SERIAL_RX)
companion_serial.setPins(SERIAL_RX, SERIAL_TX);
companion_serial.begin(115200);
serial_interface.begin(companion_serial);
#else
serial_interface.begin(Serial);
#endif
the_mesh.startInterface(serial_interface);
#elif defined(ESP32)
SPIFFS.begin(true);
store.begin();
the_mesh.begin(
#ifdef DISPLAY_CLASS
disp != NULL
#else
false
#endif
);
#ifdef WIFI_SSID
board.setInhibitSleep(true); // prevent sleep when WiFi is active
WiFi.setAutoReconnect(true);
WiFi.onEvent([](WiFiEvent_t event, WiFiEventInfo_t info){
if (event == ARDUINO_EVENT_WIFI_STA_DISCONNECTED) {
WIFI_DEBUG_PRINTLN("WiFi disconnected. Flagging for reconnect...");
wifi_needs_reconnect = true;
if (wifi_disconnected_since == 0) {
wifi_disconnected_since = millis() ? millis() : 1;
}
} else if (event == ARDUINO_EVENT_WIFI_STA_GOT_IP) {
WIFI_DEBUG_PRINTLN("connected! IP %s (companion app on :%d)",
WiFi.localIP().toString().c_str(), TCP_PORT);
wifi_needs_reconnect = false;
wifi_disconnected_since = 0;
}
});
bool have_wifi = WiFiSetupPortal::loadStoredCredentials(
configured_wifi_ssid, sizeof(configured_wifi_ssid),
configured_wifi_password, sizeof(configured_wifi_password));
if (!have_wifi && !WiFiSetupPortal::isPlaceholderSSID(WIFI_SSID)) {
strncpy(configured_wifi_ssid, WIFI_SSID, sizeof(configured_wifi_ssid) - 1);
configured_wifi_ssid[sizeof(configured_wifi_ssid) - 1] = '\0';
strncpy(configured_wifi_password, WIFI_PWD, sizeof(configured_wifi_password) - 1);
configured_wifi_password[sizeof(configured_wifi_password) - 1] = '\0';
have_wifi = true;
}
if (have_wifi) {
WiFi.mode(WIFI_STA);
wifi_disconnected_since = millis() ? millis() : 1;
WiFi.begin(configured_wifi_ssid, configured_wifi_password);
}
#ifndef WITH_WEBCONFIG
else if (!wifiSetupPortal().begin(COMPANION_WIFI_SETUP_AP, saveCompanionWiFi, nullptr)) {
WIFI_DEBUG_PRINTLN("WiFi setup: could not start setup portal");
}
#endif
#ifdef WITH_WEBCONFIG
// WiFi companions expose the shared WebUI by default. With no stored
// credentials it opens the captive setup AP; otherwise it waits for the
// station connection and serves the same page on the LAN.
if (WebConfigServer::loadEnabled(true)) {
char web_reply[160];
the_mesh.startWebConfig(!have_wifi, web_reply);
WIFI_DEBUG_PRINTLN("%s", web_reply);
}
#endif
// Disable WiFi modem power-save after starting WebConfig: that startup may
// restore a saved ESP-IDF WiFi power policy. Companion radios must keep
// modem sleep disabled because its pauses can stall SX1262 SPI/DIO service.
WiFi.setSleep(false);
serial_interface.begin(TCP_PORT);
#ifdef ENABLE_OTA
ota_seeder_server.begin(); // dedicated OTA seeder port for `motatool serve --tcp` (relay over LoRa)
WIFI_DEBUG_PRINTLN("OTA seeder listening on :%d (motatool serve --tcp)", OTA_SEEDER_TCP_PORT);
ota_console_server.begin(); // dedicated OTA text-console port (`nc <ip> 5002` -> `ota ...`)
WIFI_DEBUG_PRINTLN("OTA console listening on :%d (nc <ip> %d, type `ota ...`)", OTA_CONSOLE_TCP_PORT, OTA_CONSOLE_TCP_PORT);
#endif
#elif defined(BLE_PIN_CODE)
serial_interface.begin(BLE_NAME_PREFIX, the_mesh.getNodePrefs()->node_name, the_mesh.getBLEPin());
#elif defined(SERIAL_RX)
companion_serial.setPins(SERIAL_RX, SERIAL_TX);
companion_serial.begin(115200);
serial_interface.begin(companion_serial);
#else
serial_interface.begin(Serial);
#endif
the_mesh.startInterface(serial_interface);
#else
#error "need to define filesystem"
#endif
sensors.begin();
#if ENV_INCLUDE_GPS == 1
the_mesh.applyGpsPrefs();
#endif
#ifdef DISPLAY_CLASS
ui_task.begin(disp, &sensors, the_mesh.getNodePrefs()); // still want to pass this in as dependency, as prefs might be moved
#endif
board.onBootComplete();
#ifdef ESP32_PLATFORM
#if !CONFIG_IDF_TARGET_ESP32C6
// Enable BLE sleep
esp_err_t errBLESleep = esp_bt_sleep_enable();
if (errBLESleep == ESP_OK) {
Serial.println("Bluetooth sleep enabled successfully");
} else {
Serial.printf("Bluetooth sleep enable failed: %s\n", esp_err_to_name(errBLESleep));
}
#endif
#if CONFIG_IDF_TARGET_ESP32C3
esp_pm_config_esp32c3_t pm_config;
#elif CONFIG_IDF_TARGET_ESP32S3
esp_pm_config_esp32s3_t pm_config;
#elif CONFIG_IDF_TARGET_ESP32
esp_pm_config_esp32_t pm_config;
#elif CONFIG_IDF_TARGET_ESP32C6
esp_pm_config_t pm_config;
#endif
// Configure Power Management
pm_config = { .max_freq_mhz = 80, .min_freq_mhz = 40, .light_sleep_enable = true };
esp_err_t errPM = esp_pm_configure(&pm_config);
if (errPM == ESP_OK) {
Serial.println("Power Management configured successfully");
} else {
Serial.printf("Power Management failed to configure: %d\r\n", errPM);
}
#endif
}
void loop() {
#if defined(NRF52_PLATFORM)
board.feedWatchdog();
#endif
the_mesh.loop();
sensors.loop();
#ifdef DISPLAY_CLASS
#if defined(ESP32) && defined(WIFI_SSID) && defined(WITH_WEBCONFIG)
if (the_mesh.isWebConfigSetupActive()
#ifdef WITH_MQTT_BRIDGE
|| !the_mesh.isMQTTConfigured()
#endif
) {
renderCompanionSetupDisplay();
} else {
ui_task.loop();
}
#else
ui_task.loop();
#endif
#endif
rtc_clock.tick();
#ifdef HAS_EXTERNAL_WATCHDOG
external_watchdog.loop();
#endif
#ifdef ETHERNET_ENABLED
serial_interface.loop();
#endif
// USB power alone (for example, a wall charger) must not disable power
// saving. Stay awake only while a computer has an active USB data session.
if (!board.isUsbHostConnected() && !the_mesh.hasPendingWork()) {
#if defined(NRF52_PLATFORM)
board.sleep(0); // nrf ignores seconds param, sleeps whenever possible
#elif defined(ESP32_PLATFORM)
if (!serial_interface.isReadBusy() && !serial_interface.isWriteBusy()) { // BLE is not busy
vTaskDelay(pdMS_TO_TICKS(10)); // attempt to sleep
}
#endif
}
#if defined(ESP32) && defined(WIFI_SSID)
#ifdef WITH_WEBCONFIG
the_mesh.serviceWebConfig();
#endif
#ifdef ENABLE_OTA
ota_seeder_loop(); // accept/drop a motatool `serve --tcp` connection on the dedicated seeder port
ota_console_loop(); // service the OTA text console (port 5002)
#endif
if (WiFi.status() == WL_CONNECTED) {
wifi_disconnected_since = 0;
#ifdef WITH_WEBCONFIG
if (wifi_setup_recovery_mode && the_mesh.isWebConfigSetupActive()) {
the_mesh.stopWebConfig();
wifi_setup_recovery_mode = false;
}
#endif
if (wifi_setup_recovery_mode
#ifdef WITH_WEBCONFIG
&& !the_mesh.isWebConfigSetupActive()
#else
&& !wifiSetupPortal().isActive()
#endif
) {
wifi_setup_recovery_mode = false;
}
} else if (configured_wifi_ssid[0]) {
unsigned long now = millis();
if (wifi_disconnected_since == 0) wifi_disconnected_since = now ? now : 1;
if (!wifi_setup_recovery_mode
#ifdef WITH_WEBCONFIG
&& !the_mesh.isWebConfigSetupActive()
#else
&& !wifiSetupPortal().isActive()
#endif
&& now - wifi_disconnected_since >= WIFI_SETUP_FALLBACK_MS) {
#ifdef WITH_WEBCONFIG
if (WebConfigServer::loadEnabled(true)) {
char web_reply[160];
if (the_mesh.startWebConfig(true, web_reply)) {
wifi_setup_recovery_mode = true;
WIFI_DEBUG_PRINTLN("WiFi unavailable for two minutes; %s", web_reply);
} else {
wifi_disconnected_since = now;
}
}
#else
if (wifiSetupPortal().begin(COMPANION_WIFI_SETUP_AP, saveCompanionWiFi, nullptr)) {
wifiSetupPortal().configureRecovery(
configured_wifi_ssid, configured_wifi_password, WIFI_SETUP_FALLBACK_MS);
wifi_setup_recovery_mode = true;
WIFI_DEBUG_PRINTLN("WiFi unavailable for two minutes; setup AP started");
} else {
// Avoid retrying portal creation on every pass through loop().
wifi_disconnected_since = now;
}
#endif
}
}
// Safely attempt to reconnect every 10 seconds if flagged
if (
#ifdef WITH_WEBCONFIG
!the_mesh.isWebConfigSetupActive()
#else
!wifiSetupPortal().isActive()
#endif
&& wifi_needs_reconnect
&& (millis() - last_wifi_reconnect_attempt > 10000)) {
WIFI_DEBUG_PRINTLN("Attempting manual WiFi reconnect...");
WiFi.disconnect();
WiFi.reconnect();
last_wifi_reconnect_attempt = millis();
}
#ifdef WITH_MQTT_BRIDGE
the_mesh.serviceMQTT(configured_wifi_ssid, configured_wifi_password);
#endif
#endif
}
Reference in New Issue View Git Blame Copy Permalink