mirror of
https://github.com/mikecarper/MeshCore.git
synced 2026-09-26 16:27:57 +00:00
agessaman
daec2e4edd
Three defects found reviewing the preceding commits.
1. reconnectSlotClient() stranded a STOPPED client, reintroducing the very bug
this branch fixes. It only rebuilt when isStarted() was true and otherwise
fell through to reconnect(), which is a documented no-op on a stopped client
— so nothing restarted it, at any rung, including the breaker probe. The
WiFi-transition teardown reaches exactly this state: it calls the hard
disconnect(), clearing _started while initial_connect_done stays set, so
after WiFi returned the slot could never come back. Now a stopped client is
started with connect() before the rebuild/reuse decision is considered.
The post-NTP credential refresh had the same exposure — it called
reconnect() directly — so it now goes through the helper too, still reusing
the transport since its fault is stale credentials, not the transport.
2. Allocating the neighbors buffer on first use let a stopped bridge allocate.
A neighbour discovery started before a stop can complete after it, and
neither caller rechecks bridge state, so requestPublishNeighbors() would
allocate 4 KB after releaseRuntimeBuffers() had already run and strand
_neighbors_publish_pending with no task to consume it. end() then returns
early on !_initialized, retaining the buffer until a later begin/end or a
reboot. Guarded on isRunning(), the same flag end() checks.
The release/acquire handoff itself was confirmed sound: the allocation and
copy precede the release store, and the task loop reads the pointer only
after its acquire load, so a half-published pointer is not observable.
3. The post-link map check failed open, contradicting the fail-closed claim in
its own commit message. A missing map, an unrecognised map format, or a
partial archive list each warned and passed; and it hardcoded firmware.map
while the post-action target used ${PROGNAME}, so a renamed program could
inspect a stale or absent file and still succeed. All four now fail the
build, and it requires every one of the four archives to appear rather than
at least one.
Rebuilt Heltec_v3_repeater_observer_mqtt, Heltec_v3_repeater and
heltec_v4_repeater_observer_mqtt; the opt-in path still reports all 4 archives
linked from .mbedtls-4k/.
(cherry picked from commit 5b5f076e5e165997e8050f2be061c7c67340fcf7)