added timezone handling, updated mqtt packet output to use the proper timezones for timestamp and time/date, updated mqtt packet to use raw data instead of parsed packet structure, updated packet upload to use proper packet hash

examples/simple_repeater/MyMesh.cpp

@@ -343,12 +343,19 @@ void MyMesh::logRxRaw(float snr, float rssi, const uint8_t raw[], int len) {
   mesh::Utils::printHex(Serial, raw, len);
   Serial.println();
 #endif
+
+#ifdef WITH_BRIDGE
+  if (_prefs.bridge_enabled) {
+    // Store raw radio data for MQTT messages
+    bridge.storeRawRadioData(raw, len, snr, rssi);
+  }
+#endif
 }
 
 void MyMesh::logRx(mesh::Packet *pkt, int len, float score) {
 #ifdef WITH_BRIDGE
   if (_prefs.bridge_pkt_src == 1) {
-    bridge.sendPacket(pkt);
+    bridge.onPacketReceived(pkt);
   }
 #endif
 
@@ -712,7 +719,7 @@ MyMesh::MyMesh(mesh::MainBoard &board, mesh::Radio &radio, mesh::MillisecondCloc
   // bridge defaults
   _prefs.bridge_enabled = 1;    // enabled
   _prefs.bridge_delay   = 500;  // milliseconds
-  _prefs.bridge_pkt_src = 0;    // logTx
+  _prefs.bridge_pkt_src = 1;    // logRx (RX packets)
   _prefs.bridge_baud = 115200;  // baud rate
   _prefs.bridge_channel = 1;    // channel 1
 
@@ -729,6 +736,7 @@ MyMesh::MyMesh(mesh::MainBoard &board, mesh::Radio &radio, mesh::MillisecondCloc
   _prefs.mqtt_status_enabled = 1;    // enabled
   _prefs.mqtt_packets_enabled = 1;   // enabled
   _prefs.mqtt_raw_enabled = 0;       // disabled
+  _prefs.mqtt_tx_enabled = 0;        // disabled (RX only for now)
   _prefs.mqtt_status_interval = 300000; // 5 minutes
   
   // WiFi defaults