Payloads of 166 or 167 bytes previously passed the frame-sized bound
(MAX_CHANNEL_DATA_LENGTH = 167) but were rejected by sendGroupData
against MAX_GROUP_DATA_LENGTH (165), causing ERR_CODE_TABLE_FULL (retry
later) to be returned instead of ERR_CODE_ILLEGAL_ARG.
Fixes#3345
- scope the serial config CLI to RP2040; it was exposing the rescue CLI
(cat/rm/erase) on every ESP32 WiFi build, which gates it behind a
physical long-press
- bound and space out RP2040 rejoins: the core's join busy-waits, so cap
it at 5s and retry every 30s instead of every 10s
- stamp the reconnect timer in setup(), so the first loop() doesn't tear
down an association that is still finishing DHCP
- treat stored credentials as a pair, and pass NULL (not "") for an open
network
- teach build_as_lib.py where SerialWifiInterface moved
Store ssid/pwd in NodePrefs and set them with 'set wifi.ssid' /
'set wifi.pwd' over USB serial; build-time WIFI_SSID/WIFI_PWD stay as
the fallback. Headless WiFi builds get the config CLI on Serial, which
is otherwise unused there.
The serial command buffers must stay NUL-terminated within their
bounds: if they ever aren't, strlen() can return >= sizeof(command)
and the read loop would index past the buffer. Additionally, a full
buffer now becomes a completed line (end-of-line marker placed
inside the buffer, NUL terminator kept) instead of overwriting the
terminator and silently corrupting the buffer for the next pass.
Applies to the serial CLI readers of the repeater, room server,
sensor and secure chat examples, and to the CLI rescue reader of
the companion example.
* Add tz_offset companion prefs and get/set commands for companion cli
* Use tz_offset for clock on display
Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com>
Brings in the external FEM gain preferences (fem_txgain, PR #3137 plus the
companion-side port), the AGC reset rxgain fix, the LR2021 preamble/IRQ
timeout logic, and assorted variant fixes (T096, T-Echo Card TCXO, promicro
pinmap, minewsemi, R1 Neo).
Conflict resolutions:
- SH1106Display: both sides fixed T-Beam Supreme startup independently. Kept
our _initialized guard and DISPLAY_ADDRESS_ALT override, took upstream's
SA0-pair fallback and its unconditional display.begin() so the frame buffer
is allocated even when no panel answers.
- MyMesh/SensorMesh/CommonCLI: took upstream's fem_txgain default and wiring,
kept our comments and the observer-side prefs layout.
Also fixes CustomLLCC68Wrapper, which upstream missed when sx126xResetAGC
gained its rx_boost_gain parameter. No variant builds that wrapper today, so
neither tree failed to compile.
Introduced consistent preferences for external LoRa FEM RX and TX gain settings in NodePrefs. Updated companion MyMesh to apply these settings during initialization and transmission. Added unit tests to verify the round-trip serialization of these new preferences.
agessaman