Integrates Mike Carper's transmission-reliability work (direct retries with
SNR-adaptive backoff and CR, flood retry controls, alt-path replies, flood
channel gates) plus its upstream/dev base (as of 2026-07-06) on top of the
observer stack. The flex branch is untouched; this branch is the experimental
integration line.
Conflict-resolution decisions, for future re-syncs (git rerere is enabled and
has recorded these):
- NodePrefs adopts keymind/upstream member order + retry/flood tail. Member
order is in-memory only: /com_prefs stays field-by-field with the same
canonical file order both sides already share through offset 294; keymind
appends the retry tail at 295+ (new canonical size 676). Flex fleet files
load unchanged; retry fields default via direct_retry_prefs_magic.
- loadPrefsInt keeps the fork's legacy MQTT-gap recovery but moves its
detection boundary from 'extra > 5' to 'extra > LEGACY_MQTT_GAP_3SLOT (864)'
so keymind-size tails take the normal read path. COM_PREFS_TAIL_BYTES
retired.
- Dispatcher/RadioLibWrappers: fork watchdog additions + keymind TX overrides
and CAD busy counter are unioned; RxReservePacketManager::queueOutbound
follows upstream's new bool return (false when shedding).
- CommonCLI: fork observer dispatch + versioned /mqtt_prefs machinery kept;
keymind CLI (retry/flood/radioat) taken; duplicate CAD/FEM handlers and
sanitise lines deduped (kept keymind placements to minimize future diff).
- MyMesh (repeater/room): fork alerter/OTA/observer wiring kept; keymind
scheduled-radio system replaces the old pending_* temp-radio members;
applySavedRadioParams() replaces raw setParams at startup.
- ESP32Board: fork manifest-OTA + keymind powerOff/deepSleep and stopOTAUpdate
unioned; startOTAUpdate keeps fork's STA-aware IP with keymind's idempotency
guard.
- build.sh taken wholesale from keymind (fleet builds use GH Actions).
Verified: Heltec_v3_repeater_observer_mqtt, Heltec_v3_repeater,
heltec_v4_repeater_observer_mqtt, Heltec_v3_room_server_observer_mqtt build;
host migration harness (13 MQTT + non-MQTT scenarios) passes with updated
expectations (676-byte /com_prefs; odd-size files normalize on save, not
load); native unit tests 13/13.
Completes the FEM RX-gain restoration begun in the CAD/prefs change, which
persisted radio_fem_rxgain but didn't yet drive the hardware. Also dropped
by the 22eb9b87 revert; restored to match upstream.
- MainBoard: setLoRaFemLnaEnabled()/canControlLoRaFemLna()/isLoRaFemLnaEnabled()
virtuals (default: can't control — non-FEM boards report unsupported)
- heltec_v4: board overrides driving loRaFEMControl; LoRaFEMControl gains the
isLNAEnabled() getter (it already tracked lna_enabled and drove the FEM)
- CLI: `set radio.fem.rxgain on/off` / `get radio.fem.rxgain` (guarded by
canControlLoRaFemLna, so it reports "unsupported" on non-FEM boards)
- app startup applies the persisted pref: board.setLoRaFemLnaEnabled(
_prefs.radio_fem_rxgain), beside setRxBoostedGainMode
Default is ON (upstream), so on FEM boards the LNA is enabled after upgrade —
a real reception behavior change to confirm on hardware. The other FEM
variants (heltec_t096/tower_v2/tracker_v2) need the same small board-override
addition; until then `radio.fem.rxgain` reports unsupported there (no
regression — status quo).
Builds: heltec_v4 repeater-observer + room-observer (FEM board), Heltec_v3
repeater (non-FEM, base virtuals no-op). NEEDS on-device validation on a
Heltec V4.
Continues restoring features dropped by the 22eb9b87 revert. Both were
upstream-tested code, not intentional fork removals.
CAD (hardware Channel Activity Detection / listen-before-talk before TX),
fully restored and functional:
- NodePrefs.cad_enabled + `set cad on/off` / `get cad` CLI (default off)
- RadioLibWrapper: _cad_enabled + setCADEnabled() + the scanChannel()/CAD
branch in isChannelActive() (Phase 1 already restored the Dispatcher hook)
- getCADEnabled() overrides in the repeater/room/sensor apps (return the
pref) and companion (always on, matching upstream)
radio_fem_rxgain: the NodePrefs field + /com_prefs persistence are restored
here at upstream's exact offsets (293 fem, 294 cad), which makes /com_prefs
byte-identical to upstream through the tail. The field is persisted and
defaults on (upstream default), but the per-board LNA *driving* + the
`radio.fem.rxgain` CLI are deferred to the FEM-hardware change (they depend
on board methods and want per-board bench testing).
The new-format /com_prefs tail grows from 3 to 5 bytes; the old-format
detection threshold and the host migration harness are updated accordingly
(all scenarios pass, incl. the non-MQTT-build variant).
Builds: Heltec_v3 repeater, repeater-observer, room-observer. (sensor /
plain-room / companion fail only on the pre-existing Timezone.h include
issue, unrelated to these changes.)
* room server: added RegionMap, and new CommonCLI wiring, default_scope handling
* sensor: only minimal RegionMap wiring. Still needs work to handle default-scope
- Updated the advert timer calculation to explicitly cast the advert interval to an integer type, ensuring consistent behavior across different mesh implementations.
- Enhanced the savePrefs function in CommonCLI to trigger advert timer updates when the advert interval changes, improving responsiveness to user configuration changes.
- Removed the aggressive 4-hour health check in MQTTBridge to prevent connection instability, allowing the MQTT client library to manage connection health internally.
- Added formatStatsReply, formatRadioStatsReply, and formatPacketStatsReply methods in MyMesh for both simple_repeater, simple_room_server, and simple_sensor.
- Updated CommonCLI to handle new stats commands.
agessaman