dandri/MeshCore-mqtt-observer
1
0 Fork 0
mirror of https://github.com/agessaman/MeshCore.git synced 2026-10-22 10:22:29 +00:00
Code Issues Packages Projects Releases Wiki Activity
Files
docs/observer-docs-refresh
MeshCore-mqtt-observer/variants/heltec_e213/platformio.ini
T
agessaman 33f1b1096d feat(observer): add dev-preview observer envs for 11 more ESP32-S3 boards 
Repeater + room-server observer builds for Heltec RC32 (with and without
display), Wireless Tracker v1.0, Wireless Paper, Vision Master E213/E290,
Meshnology W12, LilyGo T-ETH Elite (WiFi only), T3S3 SX1276, Xiao S3 and
Ebyte EoRa-S3. The 4 MB boards (T3S3 SX1276, EoRa-S3) use min_spiffs and
omit SNMP; non-PSRAM boards opt into MQTT_NEIGHBORS_WITHOUT_PSRAM.
2026-09-26 10:03:48 -07:00

260 lines
7.1 KiB
INI
Raw Permalink Blame History

[Heltec_E213_base]
extends = esp32_base
board = heltec_e213
build_flags =
${esp32_base.build_flags}
-I variants/heltec_e213
-D Vision_Master_E213
-D ARDUINO_USB_CDC_ON_BOOT=1
-D USE_SX1262
-D RADIO_CLASS=CustomSX1262
-D WRAPPER_CLASS=CustomSX1262Wrapper
-D P_LORA_DIO_1=14
-D P_LORA_NSS=8
-D P_LORA_RESET=12
-D P_LORA_BUSY=13
-D P_LORA_SCLK=9
-D P_LORA_MISO=11
-D P_LORA_MOSI=10
-D P_LORA_TX_LED=45
-D LORA_TX_POWER=22
-D PIN_USER_BTN=0
-D PIN_VEXT_EN=18
-D PIN_VEXT_EN_ACTIVE=HIGH
-D PIN_VBAT_READ=7
-D PIN_ADC_CTRL=46
-D SX126X_DIO2_AS_RF_SWITCH=true
-D SX126X_DIO3_TCXO_VOLTAGE=1.8
-D SX126X_CURRENT_LIMIT=140
-D SX126X_RX_BOOSTED_GAIN=1
-D PIN_BOARD_SDA=39
-D PIN_BOARD_SCL=38
-D DISP_CS=5
-D DISP_BUSY=1
-D DISP_DC=2
-D DISP_RST=3
-D DISP_SCLK=4
-D DISP_MOSI=6
build_src_filter = ${esp32_base.build_src_filter}
+<../variants/heltec_e213>
lib_deps =
${esp32_base.lib_deps}
https://github.com/Quency-D/heltec-eink-modules/archive/563dd41fd850a1bc3039b8723da4f3a20fe1c800.zip
[env:Heltec_E213_companion_radio_ble]
extends = Heltec_E213_base
build_flags =
${Heltec_E213_base.build_flags}
-I examples/companion_radio/ui-new
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
-D DISPLAY_CLASS=E213Display
-D AUTO_OFF_MILLIS=0
-D BLE_PIN_CODE=123456 ; dynamic, random PIN
-D BLE_DEBUG_LOGGING=1
-D OFFLINE_QUEUE_SIZE=256
build_src_filter = ${Heltec_E213_base.build_src_filter}
+<helpers/ui/E213Display.cpp>
+<helpers/esp32/*.cpp>
+<../examples/companion_radio/*.cpp>
+<../examples/companion_radio/ui-new/*.cpp>
lib_deps =
${Heltec_E213_base.lib_deps}
densaugeo/base64 @ ~1.4.0
bakercp/CRC32 @ ^2.0.0
[env:Heltec_E213_companion_radio_usb]
extends = Heltec_E213_base
build_flags =
${Heltec_E213_base.build_flags}
-I examples/companion_radio/ui-new
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
-D DISPLAY_CLASS=E213Display
-D AUTO_OFF_MILLIS=0
-D OFFLINE_QUEUE_SIZE=256
-D ENABLE_USB_INTERFACE
build_src_filter = ${Heltec_E213_base.build_src_filter}
+<helpers/ui/E213Display.cpp>
+<helpers/esp32/*.cpp>
+<../examples/companion_radio/*.cpp>
+<../examples/companion_radio/ui-new/*.cpp>
lib_deps =
${Heltec_E213_base.lib_deps}
densaugeo/base64 @ ~1.4.0
bakercp/CRC32 @ ^2.0.0
[env:Heltec_E213_repeater]
extends = Heltec_E213_base
build_flags =
${Heltec_E213_base.build_flags}
-D DISPLAY_CLASS=E213Display
-D ADVERT_NAME='"Heltec E213 Repeater"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
build_src_filter = ${Heltec_E213_base.build_src_filter}
+<helpers/ui/E213Display.cpp>
+<../examples/simple_repeater>
lib_deps =
${Heltec_E213_base.lib_deps}
${esp32_ota.lib_deps}
bakercp/CRC32 @ ^2.0.0
; [env:Heltec_E213_repeater_bridge_rs232]
; extends = Heltec_E213_base
; build_flags =
; ${Heltec_E213_base.build_flags}
; -D DISPLAY_CLASS=E213Display
; -D ADVERT_NAME='"RS232 Bridge"'
; -D ADVERT_LAT=0.0
; -D ADVERT_LON=0.0
; -D ADMIN_PASSWORD='"password"'
; -D MAX_NEIGHBOURS=50
; -D WITH_RS232_BRIDGE=Serial2
; -D WITH_RS232_BRIDGE_RX=5
; -D WITH_RS232_BRIDGE_TX=6
; -D BRIDGE_DEBUG=1
; ; -D MESH_PACKET_LOGGING=1
; ; -D MESH_DEBUG=1
; build_src_filter = ${Heltec_E213_base.build_src_filter}
; +<helpers/bridges/RS232Bridge.cpp>
; +<helpers/ui/E213Display.cpp>
; +<../examples/simple_repeater>
; lib_deps =
; ${Heltec_E213_base.lib_deps}
; ${esp32_ota.lib_deps}
; bakercp/CRC32 @ ^2.0.0
[env:Heltec_E213_repeater_bridge_espnow]
extends = Heltec_E213_base
build_flags =
${Heltec_E213_base.build_flags}
-D DISPLAY_CLASS=E213Display
-D ADVERT_NAME='"ESPNow Bridge"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
-D WITH_ESPNOW_BRIDGE=1
; -D BRIDGE_DEBUG=1
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${Heltec_E213_base.build_src_filter}
+<helpers/bridges/ESPNowBridge.cpp>
+<helpers/ui/E213Display.cpp>
+<../examples/simple_repeater>
lib_deps =
${Heltec_E213_base.lib_deps}
${esp32_ota.lib_deps}
bakercp/CRC32 @ ^2.0.0
[env:Heltec_E213_room_server]
extends = Heltec_E213_base
build_flags =
${Heltec_E213_base.build_flags}
-D DISPLAY_CLASS=E213Display
-D ADVERT_NAME='"Heltec E213 Room"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D ROOM_PASSWORD='"hello"'
build_src_filter = ${Heltec_E213_base.build_src_filter}
+<helpers/ui/E213Display.cpp>
+<../examples/simple_room_server>
lib_deps =
${Heltec_E213_base.lib_deps}
${esp32_ota.lib_deps}
bakercp/CRC32 @ ^2.0.0
[env:Heltec_E213_kiss_modem]
extends = Heltec_E213_base
build_src_filter = ${Heltec_E213_base.build_src_filter}
+<../examples/kiss_modem/>
[env:Heltec_E213_repeater_observer_mqtt]
extends = Heltec_E213_base
extra_scripts =
${esp32_base.extra_scripts}
pre:scripts/generate_cert_bundle.py
board_ssl_cert_source = adafruit-full
board_build.embed_files = src/certs/x509_crt_bundle.bin
build_flags =
${Heltec_E213_base.build_flags}
-D DISPLAY_CLASS=E213Display
-D ADVERT_NAME='"MQTT Observer"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
-D WITH_MQTT_BRIDGE=1
-D MQTT_MAX_PACKET_SIZE=1024
-D MQTT_DEBUG=1
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
-D CONFIG_MBEDTLS_CERTIFICATE_BUNDLE=y
-D ESP32_CPU_FREQ=160
-D MQTT_WIFI_TX_POWER=WIFI_POWER_11dBm
-D WITH_SNMP=1
build_src_filter = ${Heltec_E213_base.build_src_filter}
+<helpers/bridges/MQTTBridge.cpp>
+<helpers/MQTTMessageBuilder.cpp>
+<helpers/JWTHelper.cpp>
+<helpers/SNMPAgent.cpp>
+<helpers/ui/E213Display.cpp>
+<../examples/simple_repeater>
lib_deps =
${Heltec_E213_base.lib_deps}
${esp32_ota.lib_deps}
bakercp/CRC32 @ ^2.0.0
elims/PsychicMqttClient@^0.2.4
bblanchon/ArduinoJson @ 7.4.3
arduino-libraries/NTPClient
JChristensen/Timezone
paulstoffregen/Time@1.6.1
0neblock/SNMP_Agent
[env:Heltec_E213_room_server_observer_mqtt]
extends = Heltec_E213_base
extra_scripts =
${esp32_base.extra_scripts}
pre:scripts/generate_cert_bundle.py
board_ssl_cert_source = adafruit-full
board_build.embed_files = src/certs/x509_crt_bundle.bin
build_flags =
${Heltec_E213_base.build_flags}
-D DISPLAY_CLASS=E213Display
-D ADVERT_NAME='"Heltec E213 Room Observer"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D ROOM_PASSWORD='"hello"'
-D MAX_NEIGHBOURS=50
-D WITH_MQTT_BRIDGE=1
-D MQTT_MAX_PACKET_SIZE=1024
-D MQTT_DEBUG=1
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
-D CONFIG_MBEDTLS_CERTIFICATE_BUNDLE=y
-D ESP32_CPU_FREQ=160
-D MQTT_WIFI_TX_POWER=WIFI_POWER_11dBm
-D WITH_SNMP=1
build_src_filter = ${Heltec_E213_base.build_src_filter}
+<helpers/bridges/MQTTBridge.cpp>
+<helpers/MQTTMessageBuilder.cpp>
+<helpers/JWTHelper.cpp>
+<helpers/SNMPAgent.cpp>
+<helpers/ui/E213Display.cpp>
+<../examples/simple_room_server>
lib_deps =
${Heltec_E213_base.lib_deps}
${esp32_ota.lib_deps}
bakercp/CRC32 @ ^2.0.0
elims/PsychicMqttClient@^0.2.4
bblanchon/ArduinoJson @ 7.4.3
arduino-libraries/NTPClient
JChristensen/Timezone
paulstoffregen/Time@1.6.1
0neblock/SNMP_Agent
Reference in new issue View Git Blame Copy Permalink