dandri/MeshCore-mqtt-observer
1
0
Fork 0
mirror of https://github.com/agessaman/MeshCore.git synced 2026-10-22 05:32:59 +00:00
Code Issues Packages Projects Releases Wiki Activity
Files
docs/observer-docs-refresh
MeshCore-mqtt-observer/variants/heltec_tracker/platformio.ini
T
agessaman 33f1b1096d feat(observer): add dev-preview observer envs for 11 more ESP32-S3 boards 
Repeater + room-server observer builds for Heltec RC32 (with and without
display), Wireless Tracker v1.0, Wireless Paper, Vision Master E213/E290,
Meshnology W12, LilyGo T-ETH Elite (WiFi only), T3S3 SX1276, Xiao S3 and
Ebyte EoRa-S3. The 4 MB boards (T3S3 SX1276, EoRa-S3) use min_spiffs and
omit SNMP; non-PSRAM boards opt into MQTT_NEIGHBORS_WITHOUT_PSRAM.
2026-09-26 10:03:48 -07:00

284 lines
8.3 KiB
INI
Raw Permalink Blame History

[Heltec_tracker_base]
extends = esp32_base
board = esp32-s3-devkitc-1
build_flags =
${esp32_base.build_flags}
-I variants/heltec_tracker
-D HELTEC_LORA_V3
-D ARDUINO_USB_CDC_ON_BOOT=1 ; need for Serial
-D ESP32_CPU_FREQ=80
-D P_LORA_DIO_1=14
-D P_LORA_NSS=8
-D P_LORA_RESET=RADIOLIB_NC
-D P_LORA_BUSY=13
-D P_LORA_SCLK=9
-D P_LORA_MISO=11
-D P_LORA_MOSI=10
-D USE_SX1262
-D RADIO_CLASS=CustomSX1262
-D WRAPPER_CLASS=CustomSX1262Wrapper
-D LORA_TX_POWER=22
-D P_LORA_TX_LED=18
-D PIN_BOARD_SDA=45
-D PIN_BOARD_SCL=46
-D PIN_USER_BTN=0
-D PIN_ADC_CTRL=2
-D PIN_TFT_SDA=42 ; SDIN
-D PIN_TFT_SCL=41 ; SCLK
-D PIN_TFT_DC=40 ; RS (register select)
-D PIN_TFT_RST=39 ; RES
-D PIN_TFT_CS=38
-D USE_PIN_TFT=1
-D PIN_VEXT_EN=3 ; Vext is connected to VDD which is also connected to OLED & GPS
-D PIN_TFT_LEDA_CTL=21 ; LEDK (switches on/off via mosfet to create the ground)
-D PIN_GPS_RX=33
-D PIN_GPS_TX=34
-D PIN_GPS_EN=35 ; N-ch MOSFET Q2 drives P-ch high-side switch → active HIGH (default)
-D PIN_GPS_RESET=36
-D PIN_GPS_RESET_ACTIVE=LOW
-D GPS_BAUD_RATE=115200
-D ENV_INCLUDE_GPS=1
-D SX126X_DIO2_AS_RF_SWITCH=true
-D SX126X_DIO3_TCXO_VOLTAGE=1.8
-D SX126X_CURRENT_LIMIT=140
-D SX126X_RX_BOOSTED_GAIN=1
build_src_filter = ${esp32_base.build_src_filter}
+<../variants/heltec_tracker>
lib_deps =
${esp32_base.lib_deps}
stevemarple/MicroNMEA @ ^2.0.6
bodmer/TFT_eSPI @ ^2.4.31
[env:Heltec_Wireless_Tracker_companion_radio_usb]
extends = Heltec_tracker_base
build_flags =
${Heltec_tracker_base.build_flags}
-I src/helpers/ui
-I examples/companion_radio/ui-new
-D DISPLAY_ROTATION=1
-D DISPLAY_CLASS=ST7735Display
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
-D ENABLE_USB_INTERFACE
; -D BLE_PIN_CODE=123456 ; HWT will use display for pin
; -D OFFLINE_QUEUE_SIZE=256
; -D BLE_DEBUG_LOGGING=1
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${Heltec_tracker_base.build_src_filter}
+<helpers/esp32/*.cpp>
+<helpers/ui/MomentaryButton.cpp>
+<../examples/companion_radio/*.cpp>
+<../examples/companion_radio/ui-new/*.cpp>
+<helpers/ui/ST7735Display.cpp>
lib_deps =
${Heltec_tracker_base.lib_deps}
densaugeo/base64 @ ~1.4.0
[env:Heltec_Wireless_Tracker_companion_radio_ble]
extends = Heltec_tracker_base
build_flags =
${Heltec_tracker_base.build_flags}
-I src/helpers/ui
-I examples/companion_radio/ui-new
-D DISPLAY_ROTATION=1
-D DISPLAY_CLASS=ST7735Display
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
-D BLE_PIN_CODE=123456 ; HWT will use display for pin
-D OFFLINE_QUEUE_SIZE=256
; -D BLE_DEBUG_LOGGING=1
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${Heltec_tracker_base.build_src_filter}
+<helpers/esp32/*.cpp>
+<helpers/ui/MomentaryButton.cpp>
+<../examples/companion_radio/*.cpp>
+<../examples/companion_radio/ui-new/*.cpp>
+<helpers/ui/ST7735Display.cpp>
lib_deps =
${Heltec_tracker_base.lib_deps}
densaugeo/base64 @ ~1.4.0
[env:Heltec_Wireless_Tracker_repeater]
extends = Heltec_tracker_base
build_flags =
${Heltec_tracker_base.build_flags}
-D DISPLAY_ROTATION=1
-D DISPLAY_CLASS=ST7735Display
-D ADVERT_NAME='"Heltec Repeater"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${Heltec_tracker_base.build_src_filter}
+<helpers/ui/ST7735Display.cpp>
+<../examples/simple_repeater>
lib_deps =
${Heltec_tracker_base.lib_deps}
${esp32_ota.lib_deps}
; [env:Heltec_Wireless_Tracker_repeater_bridge_rs232]
; extends = Heltec_tracker_base
; build_flags =
; ${Heltec_tracker_base.build_flags}
; -D DISPLAY_ROTATION=1
; -D DISPLAY_CLASS=ST7735Display
; -D ADVERT_NAME='"RS232 Bridge"'
; -D ADVERT_LAT=0.0
; -D ADVERT_LON=0.0
; -D ADMIN_PASSWORD='"password"'
; -D MAX_NEIGHBOURS=50
; -D WITH_RS232_BRIDGE=Serial2
; -D WITH_RS232_BRIDGE_RX=5
; -D WITH_RS232_BRIDGE_TX=6
; -D BRIDGE_DEBUG=1
; ; -D MESH_PACKET_LOGGING=1
; ; -D MESH_DEBUG=1
; build_src_filter = ${Heltec_tracker_base.build_src_filter}
; +<helpers/bridges/RS232Bridge.cpp>
; +<helpers/ui/ST7735Display.cpp>
; +<../examples/simple_repeater>
; lib_deps =
; ${Heltec_tracker_base.lib_deps}
; ${esp32_ota.lib_deps}
[env:Heltec_Wireless_Tracker_repeater_bridge_espnow]
extends = Heltec_tracker_base
build_flags =
${Heltec_tracker_base.build_flags}
-D DISPLAY_ROTATION=1
-D DISPLAY_CLASS=ST7735Display
-D ADVERT_NAME='"ESPNow Bridge"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
-D WITH_ESPNOW_BRIDGE=1
; -D BRIDGE_DEBUG=1
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${Heltec_tracker_base.build_src_filter}
+<helpers/bridges/ESPNowBridge.cpp>
+<helpers/ui/ST7735Display.cpp>
+<../examples/simple_repeater>
lib_deps =
${Heltec_tracker_base.lib_deps}
${esp32_ota.lib_deps}
[env:Heltec_Wireless_Tracker_room_server]
extends = Heltec_tracker_base
build_flags =
${Heltec_tracker_base.build_flags}
-D DISPLAY_ROTATION=1
-D DISPLAY_CLASS=ST7735Display
-D ADVERT_NAME='"Heltec Room"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D ROOM_PASSWORD='"hello"'
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${Heltec_tracker_base.build_src_filter}
+<helpers/ui/ST7735Display.cpp>
+<../examples/simple_room_server>
lib_deps =
${Heltec_tracker_base.lib_deps}
${esp32_ota.lib_deps}
[env:Heltec_Wireless_Tracker_kiss_modem]
extends = Heltec_tracker_base
build_src_filter = ${Heltec_tracker_base.build_src_filter}
+<../examples/kiss_modem/>
[env:Heltec_Wireless_Tracker_repeater_observer_mqtt]
extends = Heltec_tracker_base
extra_scripts =
${esp32_base.extra_scripts}
pre:scripts/generate_cert_bundle.py
board_ssl_cert_source = adafruit-full
board_build.embed_files = src/certs/x509_crt_bundle.bin
build_flags =
${Heltec_tracker_base.build_flags}
-D DISPLAY_ROTATION=1
-D DISPLAY_CLASS=ST7735Display
-D ADVERT_NAME='"MQTT Observer"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
-D WITH_MQTT_BRIDGE=1
; Non-PSRAM board: neighbors table costs ~4 KB of internal DRAM (see MQTTBridge.h).
-D MQTT_NEIGHBORS_WITHOUT_PSRAM=1
-D MQTT_MAX_PACKET_SIZE=1024
-D MQTT_DEBUG=1
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
-D CONFIG_MBEDTLS_CERTIFICATE_BUNDLE=y
-D ESP32_CPU_FREQ=240
-D MQTT_WIFI_TX_POWER=WIFI_POWER_11dBm
-D WITH_SNMP=1
build_src_filter = ${Heltec_tracker_base.build_src_filter}
+<helpers/bridges/MQTTBridge.cpp>
+<helpers/MQTTMessageBuilder.cpp>
+<helpers/JWTHelper.cpp>
+<helpers/SNMPAgent.cpp>
+<helpers/ui/ST7735Display.cpp>
+<../examples/simple_repeater>
lib_deps =
${Heltec_tracker_base.lib_deps}
${esp32_ota.lib_deps}
elims/PsychicMqttClient@^0.2.4
bblanchon/ArduinoJson @ 7.4.3
arduino-libraries/NTPClient
JChristensen/Timezone
paulstoffregen/Time@1.6.1
0neblock/SNMP_Agent
[env:Heltec_Wireless_Tracker_room_server_observer_mqtt]
extends = Heltec_tracker_base
extra_scripts =
${esp32_base.extra_scripts}
pre:scripts/generate_cert_bundle.py
board_ssl_cert_source = adafruit-full
board_build.embed_files = src/certs/x509_crt_bundle.bin
build_flags =
${Heltec_tracker_base.build_flags}
-D DISPLAY_ROTATION=1
-D DISPLAY_CLASS=ST7735Display
-D ADVERT_NAME='"Heltec Tracker Room Observer"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D ROOM_PASSWORD='"hello"'
-D MAX_NEIGHBOURS=50
-D WITH_MQTT_BRIDGE=1
; Non-PSRAM board: neighbors table costs ~4 KB of internal DRAM (see MQTTBridge.h).
-D MQTT_NEIGHBORS_WITHOUT_PSRAM=1
-D MQTT_MAX_PACKET_SIZE=1024
-D MQTT_DEBUG=1
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
-D CONFIG_MBEDTLS_CERTIFICATE_BUNDLE=y
-D ESP32_CPU_FREQ=240
-D MQTT_WIFI_TX_POWER=WIFI_POWER_11dBm
-D WITH_SNMP=1
build_src_filter = ${Heltec_tracker_base.build_src_filter}
+<helpers/bridges/MQTTBridge.cpp>
+<helpers/MQTTMessageBuilder.cpp>
+<helpers/JWTHelper.cpp>
+<helpers/SNMPAgent.cpp>
+<helpers/ui/ST7735Display.cpp>
+<../examples/simple_room_server>
lib_deps =
${Heltec_tracker_base.lib_deps}
${esp32_ota.lib_deps}
elims/PsychicMqttClient@^0.2.4
bblanchon/ArduinoJson @ 7.4.3
arduino-libraries/NTPClient
JChristensen/Timezone
paulstoffregen/Time@1.6.1
0neblock/SNMP_Agent
Reference in New Issue View Git Blame Copy Permalink