mirror of
https://github.com/agessaman/MeshCore.git
synced 2026-10-20 14:32:17 +00:00
agessaman
51fc3ac58f
ESP32-S3FH4R2 (4MB flash, 2MB PSRAM, native USB-CDC) with an LR1121. Pins, the DIO5/DIO6 RF switch table and the 1.8 V TCXO follow the HF schematic and Waveshare's examples. Envs: repeater, room server, companion USB/BLE and KISS modem, all on min_spiffs so roles share one partition layout. Only RFO_HP_LF is wired (R4 on RFO_LP_LF is not fitted), so the new opt-in LR1121_FORCE_HP_PA flag keeps RadioLib on the HP PA at <= 14 dBm, where it would otherwise select the unconnected LP PA.
64 lines
1.7 KiB
C++
64 lines
1.7 KiB
C++
#include <Arduino.h>
|
|
#include "target.h"
|
|
|
|
WaveshareS3LR1121Board board;
|
|
|
|
static SPIClass spi;
|
|
RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, spi);
|
|
WRAPPER_CLASS radio_driver(radio, board);
|
|
|
|
ESP32RTCClock fallback_clock;
|
|
AutoDiscoverRTCClock rtc_clock(fallback_clock);
|
|
SensorManager sensors;
|
|
|
|
#ifndef LORA_CR
|
|
#define LORA_CR 5
|
|
#endif
|
|
|
|
// DIO5/DIO6 drive the RTC6603SP sub-GHz T/R switch; the 2.4 GHz port (RFIO_HF) is unswitched
|
|
static const uint32_t rfswitch_dios[Module::RFSWITCH_MAX_PINS] = {
|
|
RADIOLIB_LR11X0_DIO5,
|
|
RADIOLIB_LR11X0_DIO6,
|
|
RADIOLIB_NC
|
|
};
|
|
|
|
static const Module::RfSwitchMode_t rfswitch_table[] = {
|
|
// mode DIO5 DIO6
|
|
{ LR11x0::MODE_STBY, {LOW, LOW}},
|
|
{ LR11x0::MODE_RX, {HIGH, LOW}},
|
|
{ LR11x0::MODE_TX, {LOW, HIGH}},
|
|
{ LR11x0::MODE_TX_HP, {LOW, HIGH}},
|
|
{ LR11x0::MODE_TX_HF, {LOW, LOW}},
|
|
{ LR11x0::MODE_GNSS, {LOW, LOW}},
|
|
{ LR11x0::MODE_WIFI, {LOW, LOW}},
|
|
END_OF_MODE_TABLE,
|
|
};
|
|
|
|
bool radio_init() {
|
|
fallback_clock.begin();
|
|
rtc_clock.begin(Wire);
|
|
|
|
spi.begin(P_LORA_SCLK, P_LORA_MISO, P_LORA_MOSI);
|
|
int status = radio.begin(LORA_FREQ, LORA_BW, LORA_SF, LORA_CR, RADIOLIB_LR11X0_LORA_SYNC_WORD_PRIVATE,
|
|
LORA_TX_POWER, 16, LR11X0_DIO3_TCXO_VOLTAGE);
|
|
if (status != RADIOLIB_ERR_NONE) {
|
|
Serial.print("ERROR: radio init failed: ");
|
|
Serial.println(status);
|
|
return false;
|
|
}
|
|
|
|
radio.setCRC(2);
|
|
radio.explicitHeader();
|
|
radio.setRfSwitchTable(rfswitch_dios, rfswitch_table);
|
|
#ifdef RX_BOOSTED_GAIN
|
|
radio.setRxBoostedGainMode(RX_BOOSTED_GAIN);
|
|
#endif
|
|
|
|
return true;
|
|
}
|
|
|
|
mesh::LocalIdentity radio_new_identity() {
|
|
RadioNoiseListener rng(radio);
|
|
return mesh::LocalIdentity(&rng);
|
|
}
|