mirror of
https://github.com/agessaman/MeshCore.git
synced 2026-10-15 09:00:17 +00:00
agessaman
5527a26f9a
Add SetHardware sub-commands so a host can probe and configure per-board RF front-end settings: - GetCapabilities (0x1B): uint32 feature bits (AGC, FEM RX, FEM TX) - Set/GetAgcResetInterval (0x1C/0x1D): 0-1020 s, 4 s resolution, 0 disables; default stays 30 s - Set/GetFemState (0x1E/0x1F): apply/value masks for FEM RX (LNA) and TX (PA) gain; all-or-nothing, Unsupported (0x08) if any requested bit is not controllable on this board The AGC scheduler moves from main.cpp into KissModem so it is configurable and unit-tested. FEM changes that arrive mid-TX are deferred until the packet ends, since board setters drive FEM pins directly. MainBoard gains virtual FEM hooks (canControl/set/is for LNA and PA gain). Boards that already implemented these methods privately now expose them as overrides: Heltec V4, V4 R8, T096, Tracker V2, Station G3 and Wio Tracker L1 1W. KISS_FIRMWARE_VERSION bumped to 2.