mirror of
https://github.com/agessaman/MeshCore.git
synced 2026-10-15 15:30:16 +00:00
agessaman
720f0f1528
Boards own their FEM control through handleCommand() ("get/set
radio.fem.rxgain|txgain"). Use that instead of a parallel set of FEM
virtuals on MainBoard, so any board that implements the commands works
in KISS with no extra code.
- Remove the six FEM virtuals from MainBoard and the board overrides.
- KissModem talks to the board in one adapter. A gain counts as
controllable only if "get" replies exactly "> on" or "> off". "set"
is checked by reading the state back, never by its reply wording.
- SetFemState always replies with the read-back state once the
requested bits pass the capability check.
- Guard the boards' prefs writes against a NULL store. KISS attaches
no prefs, so "set radio.fem.*" would dereference NULL.
- Wio Tracker L1 1W TX gain is exposed again, matching its CLI.