diff --git a/src/helpers/TBeamS3SupremeBoard.h b/src/helpers/TBeamS3SupremeBoard.h
index e30c02ed..5a8070b9 100644
--- a/src/helpers/TBeamS3SupremeBoard.h
+++ b/src/helpers/TBeamS3SupremeBoard.h
@@ -36,7 +36,7 @@
 #define P_GPS_RX    9   //GPS RX pin
 #define P_GPS_TX    8   //GPS TX pin
 #define P_GPS_WAKE  7   //GPS Wakeup pin
-#define P_GPS_1PPS  6   //GPS 1PPS pin
+//#define P_GPS_1PPS  6   //GPS 1PPS pin - repurposed for lora tx led
 #define GPS_BAUD_RATE 9600
 
 //I2C Wire addresses
@@ -59,6 +59,9 @@ public:
 #endif
   bool power_init();
   void begin() {
+
+    power_init();
+
     ESP32Board::begin();
 
     esp_reset_reason_t reason = esp_reset_reason();
@@ -71,7 +74,6 @@ public:
       rtc_gpio_hold_dis((gpio_num_t)P_LORA_NSS);
       rtc_gpio_deinit((gpio_num_t)P_LORA_DIO_1);
     }
-    power_init();
   }
 
   void enterDeepSleep(uint32_t secs, int pin_wake_btn = -1) {
diff --git a/variants/lilygo_tbeam_supreme_SX1262/platformio.ini b/variants/lilygo_tbeam_supreme_SX1262/platformio.ini
index b9118e3f..abcd89bc 100644
--- a/variants/lilygo_tbeam_supreme_SX1262/platformio.ini
+++ b/variants/lilygo_tbeam_supreme_SX1262/platformio.ini
@@ -5,12 +5,11 @@ build_flags =
   ${esp32_base.build_flags}
   -I variants/lilygo_tbeam_supreme_SX1262
   -D LORA_TX_POWER=22
+  -D P_LORA_TX_LED=6
   -D RADIO_CLASS=CustomSX1262
   -D WRAPPER_CLASS=CustomSX1262Wrapper
   ;-D DISPLAY_CLASS=SSD1306Display      ;Needs to be modified for SH1106
   -D SX126X_RX_BOOSTED_GAIN=1
-  -D HAS_PMU=1
-  -D HAS_GPS=1
 build_src_filter = ${esp32_base.build_src_filter}
   +<../variants/lilygo_tbeam_supreme_SX1262>
 board_build.partitions = min_spiffs.csv ; get around 4mb flash limit