thinknode_m3: initial commit

variants/thinknode_m3/target.cpp

@@ -0,0 +1,99 @@
+#include <Arduino.h>
+#include "target.h"
+#include <helpers/sensors/MicroNMEALocationProvider.h>
+
+ThinknodeM3Board board;
+
+RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, SPI);
+
+WRAPPER_CLASS radio_driver(radio, board);
+
+VolatileRTCClock fallback_clock;
+AutoDiscoverRTCClock rtc_clock(fallback_clock);
+#ifdef ENV_INCLUDE_GPS
+MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1);
+EnvironmentSensorManager sensors = EnvironmentSensorManager(nmea);
+#else
+EnvironmentSensorManager sensors = EnvironmentSensorManager();
+#endif
+
+#ifdef DISPLAY_CLASS
+  NullDisplayDriver display;
+#endif
+
+#ifndef LORA_CR
+  #define LORA_CR      5
+#endif
+
+#ifdef RF_SWITCH_TABLE
+static const uint32_t rfswitch_dios[Module::RFSWITCH_MAX_PINS] = {
+  RADIOLIB_LR11X0_DIO5,
+  RADIOLIB_LR11X0_DIO6,
+  RADIOLIB_NC,
+  RADIOLIB_NC, 
+  RADIOLIB_NC
+};
+
+static const Module::RfSwitchMode_t rfswitch_table[] = {
+  // mode                 DIO5  DIO6 
+  { LR11x0::MODE_STBY,   {LOW , LOW  }},  
+  { LR11x0::MODE_RX,     {HIGH, LOW  }},
+  { LR11x0::MODE_TX,     {HIGH, HIGH }},
+  { LR11x0::MODE_TX_HP,  {LOW , HIGH }},
+  { LR11x0::MODE_TX_HF,  {LOW , LOW  }}, 
+  { LR11x0::MODE_GNSS,   {LOW , LOW  }},
+  { LR11x0::MODE_WIFI,   {LOW , LOW  }},  
+  END_OF_MODE_TABLE,
+};
+#endif
+
+bool radio_init() {
+  rtc_clock.begin(Wire);
+  
+#ifdef LR11X0_DIO3_TCXO_VOLTAGE
+  float tcxo = LR11X0_DIO3_TCXO_VOLTAGE;
+#else
+  float tcxo = 1.6f;
+#endif
+
+  SPI.setPins(P_LORA_MISO, P_LORA_SCLK, P_LORA_MOSI);
+  SPI.begin();
+  int status = radio.begin(LORA_FREQ, LORA_BW, LORA_SF, LORA_CR, RADIOLIB_LR11X0_LORA_SYNC_WORD_PRIVATE, LORA_TX_POWER, 16, tcxo);
+  if (status != RADIOLIB_ERR_NONE) {
+    Serial.print("ERROR: radio init failed: ");
+    Serial.println(status);
+    return false;  // fail
+  }
+  
+  radio.setCRC(2);
+  radio.explicitHeader();
+
+#ifdef RF_SWITCH_TABLE
+  radio.setRfSwitchTable(rfswitch_dios, rfswitch_table);
+#endif
+#ifdef RX_BOOSTED_GAIN
+  radio.setRxBoostedGainMode(RX_BOOSTED_GAIN);
+#endif
+
+  return true;  // success
+}
+
+uint32_t radio_get_rng_seed() {
+  return radio.random(0x7FFFFFFF);
+}
+
+void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
+  radio.setFrequency(freq);
+  radio.setSpreadingFactor(sf);
+  radio.setBandwidth(bw);
+  radio.setCodingRate(cr);
+}
+
+void radio_set_tx_power(uint8_t dbm) {
+  radio.setOutputPower(dbm);
+}
+
+mesh::LocalIdentity radio_new_identity() {
+  RadioNoiseListener rng(radio);
+  return mesh::LocalIdentity(&rng);  // create new random identity
+}