From c4a2b139308ecd3a03028fb2083a159311624b2e Mon Sep 17 00:00:00 2001
From: recrof <recrof@gmail.com>
Date: Sat, 11 Oct 2025 21:52:48 +0200
Subject: [PATCH] moved HeltecV3Board.h to variant folder

---
 .../heltec_v3}/HeltecV3Board.h                 | 18 +++---------------
 variants/heltec_v3/platformio.ini              |  7 +++++++
 variants/heltec_v3/target.h                    |  2 +-
 3 files changed, 11 insertions(+), 16 deletions(-)
 rename {src/helpers => variants/heltec_v3}/HeltecV3Board.h (88%)

diff --git a/src/helpers/HeltecV3Board.h b/variants/heltec_v3/HeltecV3Board.h
similarity index 88%
rename from src/helpers/HeltecV3Board.h
rename to variants/heltec_v3/HeltecV3Board.h
index c63ed2d8..afdaf639 100644
--- a/src/helpers/HeltecV3Board.h
+++ b/variants/heltec_v3/HeltecV3Board.h
@@ -2,16 +2,7 @@
 
 #include <Arduino.h>
 #include <helpers/RefCountedDigitalPin.h>
-
-// LoRa radio module pins for Heltec V3
-// Also for Heltec Wireless Tracker/Paper
-#define  P_LORA_DIO_1   14
-#define  P_LORA_NSS      8
-#define  P_LORA_RESET   RADIOLIB_NC
-#define  P_LORA_BUSY    13
-#define  P_LORA_SCLK     9
-#define  P_LORA_MISO    11
-#define  P_LORA_MOSI    10
+#include <helpers/ESP32Board.h>
 
 // built-ins
 #ifndef PIN_VBAT_READ              // set in platformio.ini for boards like Heltec Wireless Paper (20)
@@ -22,9 +13,6 @@
 #endif
 #define  PIN_ADC_CTRL_ACTIVE    LOW
 #define  PIN_ADC_CTRL_INACTIVE  HIGH
-//#define  PIN_LED_BUILTIN 35
-
-#include "ESP32Board.h"
 
 #include <driver/rtc_io.h>
 
@@ -43,7 +31,7 @@ public:
     // Auto-detect correct ADC_CTRL pin polarity (different for boards >3.2)
     pinMode(PIN_ADC_CTRL, INPUT);
     adc_active_state = !digitalRead(PIN_ADC_CTRL);
-    
+
     pinMode(PIN_ADC_CTRL, OUTPUT);
     digitalWrite(PIN_ADC_CTRL, !adc_active_state); // Initially inactive
 
@@ -64,7 +52,7 @@ public:
   void enterDeepSleep(uint32_t secs, int pin_wake_btn = -1) {
     esp_sleep_pd_config(ESP_PD_DOMAIN_RTC_PERIPH, ESP_PD_OPTION_ON);
 
-    // Make sure the DIO1 and NSS GPIOs are hold on required levels during deep sleep 
+    // Make sure the DIO1 and NSS GPIOs are hold on required levels during deep sleep
     rtc_gpio_set_direction((gpio_num_t)P_LORA_DIO_1, RTC_GPIO_MODE_INPUT_ONLY);
     rtc_gpio_pulldown_en((gpio_num_t)P_LORA_DIO_1);
 
diff --git a/variants/heltec_v3/platformio.ini b/variants/heltec_v3/platformio.ini
index b43c0870..dcf566b3 100644
--- a/variants/heltec_v3/platformio.ini
+++ b/variants/heltec_v3/platformio.ini
@@ -7,6 +7,13 @@ build_flags =
   -I variants/heltec_v3
   -D HELTEC_LORA_V3
   -D ESP32_CPU_FREQ=80
+  -D P_LORA_DIO_1=14
+  -D P_LORA_NSS=8
+  -D P_LORA_RESET=RADIOLIB_NC
+  -D P_LORA_BUSY=13
+  -D P_LORA_SCLK=9
+  -D P_LORA_MISO=11
+  -D P_LORA_MOSI=10
   -D RADIO_CLASS=CustomSX1262
   -D WRAPPER_CLASS=CustomSX1262Wrapper
   -D LORA_TX_POWER=22
diff --git a/variants/heltec_v3/target.h b/variants/heltec_v3/target.h
index b2125664..739aecfe 100644
--- a/variants/heltec_v3/target.h
+++ b/variants/heltec_v3/target.h
@@ -3,7 +3,7 @@
 #define RADIOLIB_STATIC_ONLY 1
 #include <RadioLib.h>
 #include <helpers/radiolib/RadioLibWrappers.h>
-#include <helpers/HeltecV3Board.h>
+#include <HeltecV3Board.h>
 #include <helpers/radiolib/CustomSX1262Wrapper.h>
 #include <helpers/AutoDiscoverRTCClock.h>
 #include <helpers/SensorManager.h>