diff --git a/variants/waveshare_c3_zero/WaveshareC3ZeroBoard.h b/variants/waveshare_c3_zero/WaveshareC3ZeroBoard.h deleted file mode 100644 index c066c6b7a..000000000 --- a/variants/waveshare_c3_zero/WaveshareC3ZeroBoard.h +++ /dev/null @@ -1,64 +0,0 @@ -#pragma once - -#include -#include - -#include - -class WaveshareC3ZeroBoard : public ESP32Board { -public: - void begin() { - ESP32Board::begin(); - - esp_reset_reason_t reason = esp_reset_reason(); - if (reason == ESP_RST_DEEPSLEEP) { - long wakeup_source = esp_sleep_get_gpio_wakeup_status(); - if (wakeup_source & (1 << P_LORA_DIO_1)) { // received a LoRa packet (while in deep sleep) - startup_reason = BD_STARTUP_RX_PACKET; - } - - #if defined(LORA_TX_BOOST_PIN) - gpio_hold_dis((gpio_num_t) LORA_TX_BOOST_PIN); - gpio_deep_sleep_hold_dis(); - #endif - } - - #ifdef LORA_TX_BOOST_PIN - pinMode(LORA_TX_BOOST_PIN, OUTPUT); - digitalWrite(LORA_TX_BOOST_PIN, HIGH); - #endif - - #ifdef P_LORA_TX_LED - pinMode(P_LORA_TX_LED, OUTPUT); - digitalWrite(P_LORA_TX_LED, LOW); - #endif - } - -#if defined(LORA_TX_BOOST_PIN) || defined(P_LORA_TX_LED) - void onBeforeTransmit() override { - #if defined(P_LORA_TX_LED) - digitalWrite(P_LORA_TX_LED, HIGH); // turn TX LED on - #endif - #if defined(LORA_TX_BOOST_PIN) - digitalWrite(LORA_TX_BOOST_PIN, LOW); - delay(5); - #endif - } - void onAfterTransmit() override { - #if defined(LORA_TX_BOOST_PIN) - digitalWrite(LORA_TX_BOOST_PIN, HIGH); - #endif - #if defined(P_LORA_TX_LED) - digitalWrite(P_LORA_TX_LED, LOW); // turn TX LED off - #endif - } -#endif - - uint16_t getBattMilliVolts() override { - return 0; // no battery-voltage-divider circuit on this board - } - - const char* getManufacturerName() const override { - return "Waveshare ESP32-C3-Zero"; - } -}; diff --git a/variants/waveshare_c3_zero/platformio.ini b/variants/waveshare_c3_zero/platformio.ini deleted file mode 100644 index 3811f349d..000000000 --- a/variants/waveshare_c3_zero/platformio.ini +++ /dev/null @@ -1,121 +0,0 @@ -[Waveshare_C3_Zero] -extends = esp32_base -board = esp32-c3-devkitm-1 -board_build.flash_mode = dio -build_flags = - ${esp32_base.build_flags} - -I variants/waveshare_c3_zero - -D ARDUINO_USB_CDC_ON_BOOT=1 - -D ARDUINO_USB_MODE=1 - -D P_LORA_NSS=7 - -D P_LORA_DIO_1=3 - -D P_LORA_RESET=0 - -D P_LORA_BUSY=1 - -D P_LORA_SCLK=4 - -D P_LORA_MISO=5 - -D P_LORA_MOSI=6 - -D SX126X_RXEN=10 - -D USE_SX1262 - -D RADIO_CLASS=CustomSX1262 - -D WRAPPER_CLASS=CustomSX1262Wrapper - -D SX126X_RX_BOOSTED_GAIN=1 - -D LORA_TX_POWER=14 - -D SX126X_DIO2_AS_RF_SWITCH=true - -D SX126X_DIO3_TCXO_VOLTAGE=1.8 - -D SX126X_CURRENT_LIMIT=140 -build_src_filter = ${esp32_base.build_src_filter} - +<../variants/waveshare_c3_zero> - + -lib_deps = - ${esp32_base.lib_deps} - -[env:Waveshare_C3_Zero_repeater] -extends = Waveshare_C3_Zero -build_src_filter = ${Waveshare_C3_Zero.build_src_filter} - +<../examples/simple_repeater/*.cpp> -build_flags = - ${Waveshare_C3_Zero.build_flags} - ${sensor_base.build_flags} - -UENV_INCLUDE_GPS - -UENV_INCLUDE_VL53L0X - -D ADVERT_NAME='"Waveshare C3 Repeater"' - -D ADVERT_LAT=0.0 - -D ADVERT_LON=0.0 - -D ADMIN_PASSWORD='"password"' - -D MAX_NEIGHBOURS=50 -lib_deps = - ${Waveshare_C3_Zero.lib_deps} - ${sensor_base.lib_deps} - ${esp32_ota.lib_deps} - bakercp/CRC32 @ ^2.0.0 - -[env:Waveshare_C3_Zero_room_server] -extends = Waveshare_C3_Zero -build_src_filter = ${Waveshare_C3_Zero.build_src_filter} - +<../examples/simple_room_server/*.cpp> -build_flags = - ${Waveshare_C3_Zero.build_flags} - ${sensor_base.build_flags} - -UENV_INCLUDE_GPS - -UENV_INCLUDE_VL53L0X - -D ADVERT_NAME='"Waveshare C3 Room"' - -D ADVERT_LAT=0.0 - -D ADVERT_LON=0.0 - -D ADMIN_PASSWORD='"password"' - -D ROOM_PASSWORD='"hello"' -lib_deps = - ${Waveshare_C3_Zero.lib_deps} - ${sensor_base.lib_deps} - ${esp32_ota.lib_deps} - bakercp/CRC32 @ ^2.0.0 - -[env:Waveshare_C3_Zero_companion_radio_usb] -extends = Waveshare_C3_Zero -build_src_filter = ${Waveshare_C3_Zero.build_src_filter} - +<../examples/companion_radio/*.cpp> - + -build_flags = - ${Waveshare_C3_Zero.build_flags} - -D MAX_CONTACTS=350 - -D MAX_GROUP_CHANNELS=40 - -D OFFLINE_QUEUE_SIZE=256 - -D ENABLE_USB_INTERFACE -lib_deps = - ${Waveshare_C3_Zero.lib_deps} - ${esp32_ota.lib_deps} - densaugeo/base64 @ ~1.4.0 - -[env:Waveshare_C3_Zero_companion_radio_ble] -extends = Waveshare_C3_Zero -board_build.partitions = huge_app.csv -build_src_filter = ${Waveshare_C3_Zero.build_src_filter} - +<../examples/companion_radio/*.cpp> - + -build_flags = - ${Waveshare_C3_Zero.build_flags} - -D MAX_CONTACTS=350 - -D MAX_GROUP_CHANNELS=40 - -D BLE_PIN_CODE=123456 - -D OFFLINE_QUEUE_SIZE=256 -lib_deps = - ${Waveshare_C3_Zero.lib_deps} - ${esp32_ota.lib_deps} - densaugeo/base64 @ ~1.4.0 - -[env:Waveshare_C3_Zero_companion_radio_wifi] -extends = Waveshare_C3_Zero -build_src_filter = ${Waveshare_C3_Zero.build_src_filter} - +<../examples/companion_radio/*.cpp> - + -build_flags = - ${Waveshare_C3_Zero.build_flags} - -D MAX_CONTACTS=350 - -D MAX_GROUP_CHANNELS=40 - -D OFFLINE_QUEUE_SIZE=256 - -D WIFI_DEBUG_LOGGING=1 - -D WIFI_SSID='"MySsid"' - -D WIFI_PWD='"MyPWD"' -lib_deps = - ${Waveshare_C3_Zero.lib_deps} - ${esp32_ota.lib_deps} - densaugeo/base64 @ ~1.4.0 diff --git a/variants/waveshare_c3_zero/target.cpp b/variants/waveshare_c3_zero/target.cpp deleted file mode 100644 index cb334fbb3..000000000 --- a/variants/waveshare_c3_zero/target.cpp +++ /dev/null @@ -1,46 +0,0 @@ -#include -#include "target.h" - -WaveshareC3ZeroBoard board; - -#if defined(P_LORA_SCLK) - // NOTE: ESP32-C3 only exposes one general-purpose SPI peripheral (FSPI). - // The default SPIClass() constructor does not reliably bind to it on this - // chip, which silently produces an SPI object that never talks to real - // hardware -- radio chip-detection then fails every time with no error - // other than RADIOLIB_ERR_CHIP_NOT_FOUND. Always pass FSPI explicitly. - static SPIClass spi(FSPI); - RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, spi); -#else - RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY); -#endif - -WRAPPER_CLASS radio_driver(radio, board); - -ESP32RTCClock fallback_clock; -AutoDiscoverRTCClock rtc_clock(fallback_clock); - -#if ENV_INCLUDE_GPS - #include - MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1, &rtc_clock); - EnvironmentSensorManager sensors = EnvironmentSensorManager(nmea); -#else - EnvironmentSensorManager sensors; -#endif - -bool radio_init() { - fallback_clock.begin(); - rtc_clock.begin(Wire); - -#if defined(P_LORA_SCLK) - spi.begin(P_LORA_SCLK, P_LORA_MISO, P_LORA_MOSI); - return radio.std_init(&spi); -#else - return radio.std_init(); -#endif -} - -mesh::LocalIdentity radio_new_identity() { - RadioNoiseListener rng(radio); - return mesh::LocalIdentity(&rng); // create new random identity -} diff --git a/variants/waveshare_c3_zero/target.h b/variants/waveshare_c3_zero/target.h deleted file mode 100644 index f17f197c0..000000000 --- a/variants/waveshare_c3_zero/target.h +++ /dev/null @@ -1,17 +0,0 @@ -#pragma once - -#define RADIOLIB_STATIC_ONLY 1 -#include -#include -#include -#include -#include -#include - -extern WaveshareC3ZeroBoard board; -extern WRAPPER_CLASS radio_driver; -extern AutoDiscoverRTCClock rtc_clock; -extern EnvironmentSensorManager sensors; - -bool radio_init(); -mesh::LocalIdentity radio_new_identity(); \ No newline at end of file