8 Commits

Include renames

Author	SHA1	Message	Date
Scott Powell	47b0b7b3b8	* T096, and Station G3: refactoring the 'FEM' prefs to variant-specific code ... * CommonCLI: 'FEM' commands removed * introduced static no-op attachDynamicPrefs() for all boards	2026-08-24 01:50:22 +10:00
Adam Gessaman	c58c9b2f31	fix(station-g3): apply FEM PA level at TX start ... PA PL1 re-targets the PA's DC-DC supply rail rather than selecting a logic-level gain, and the serial CLI is serviced on every main-loop pass regardless of whether a transmit is in flight. A `set radio.fem.txgain` write could therefore move the rail mid-transmit, while the SX1262 was still driving the PA at full input power. Record the requested level in setPAGainEnable() and drive the pin from setTxModeEnable(), which runs from onBeforeTransmit() ahead of startTransmit(). The level only matters while transmitting, so deferring costs nothing. Document that the pref is saved immediately but applied at the next transmit, so `get radio.fem.txgain` can lead the hardware until then.	2026-08-08 14:53:57 -07:00
agessaman	23066573e5	fix(station-g3): expose FEM gain preferences	2026-08-06 15:29:14 -07:00
ripplebizandGitHub	b797ca198e	Merge pull request #3060 from entr0p1/fix/mesh-debug-active ... Clean up debugs left on in platform.ini files	2026-07-30 12:35:22 +10:00
entr0p1	d7f378b489	Clean up debugs left on in platform.ini files	2026-07-29 18:27:15 +10:00
liamcottle	e7f2c71701	usb companion firmwares now require build flag to include usb interface	2026-07-28 03:45:02 +12:00
Kevin Le	35f654ced3	Fixed hibernate/powerOff for ESP32 boards to stay at uA	2026-07-05 23:47:27 +07:00
Chris	75fb07fc2c	Add support for Station G3 and its software configurable LNA and PA1	2026-05-09 13:53:20 -07:00