ab7935142c
EnvironmentSensorManager.cpp: Cleanup after failed RAK4631 GPS detection
...
If no GPS was detected, revert the hardware to the initial state,
otherwise we may see conflicts or increased power consumption on some
boards.
Signed-off-by: Frieder Schrempf <frieder@fris.de >
2025-12-31 14:42:42 +01:00
e79ee11872
EnvironmentSensorManager.cpp: Fix RAK4631 serial GPS detection
...
Serial1 is always true. If we want to check for the presence of a GPS
receiver, we need to check if any data was received.
Signed-off-by: Frieder Schrempf <frieder@fris.de >
2025-12-31 14:42:41 +01:00
84b84717cc
Merge pull request #1293 from weebl2000/gitignorevenv
...
Add common venv dirs to .gitignore
2026-01-01 01:29:55 +13:00
7ea751d3a0
Add venv dirs to .gitignore
2025-12-31 13:01:56 +01:00
f9720f0b0c
Merge pull request #1266 from IoTThinks/MCdev-Powersaving-for-esp32-202512
...
Added powersaving to all ESP32 boards with RTC-supported DIO1
2025-12-31 11:35:46 +11:00
4a869163b2
BUGFIX: replay protection on repeaters tripped by timestamp sent from companion node mobile app. Send the node's RTC timestamp for TXT_TYPE_CLI_DATA messages instead of the timestamp from the app (matches the sendRequest() code logic).
2025-12-30 21:58:59 +11:00
d911a34eeb
Used esp_wifi_get_mode instead of WiFi.getMode() to reduce the code size
2025-12-29 22:38:05 +07:00
33b1e7edb9
Added pad after powersaving_enabled
2025-12-29 21:49:13 +07:00
8edbb085fb
Merge pull request #1254 from entr0p1/tx-led-fix-v2
...
Fix TX LED stuck on when StartTransmit() fails
2025-12-29 16:09:08 +11:00
1c594d4cbd
Merge pull request #1274 from IoTThinks/MCdev-FixedMCUTemperature
...
To fix MCU Temperature for repeaters
2025-12-29 15:05:31 +11:00
9b08a9bd93
Merge pull request #1260 from LitBomb/patch-21
...
Update FAQ with new community projects and tx power settings for amped radios
2025-12-29 13:44:38 +11:00
1d9d37c654
Merge pull request #1247 from entr0p1/dev
...
Fixed T1000-E temperature, lux and BME280 sensor reading accuracies
2025-12-29 12:42:05 +11:00
3d6e523ec8
Merge pull request #1281 from Meshcore-Portugal/jbrazio/promicro_rs232
...
Add RS232 bridge environment configuration for ProMicro
2025-12-29 12:57:00 +13:00
992d971f07
Add RS232 bridge environment configuration for ProMicro
2025-12-28 20:04:57 +00:00
90d1e87ba1
* check for 'early receive' ACK
2025-12-27 20:46:28 +11:00
0b30d2433f
To get and average the temperature so it is more accurate, especially in low temperature
2025-12-27 15:25:21 +07:00
26321162ee
To fix the default temperature to be overridden by external sensors (if any)
2025-12-27 15:23:23 +07:00
def1902688
Fixed T-Beam board to work with sleep
2025-12-24 12:04:39 +07:00
0d11a02e71
Added extra check for P_LORA_DIO_1 before going to sleep
2025-12-24 11:47:19 +07:00
89a289eb22
Added powersaving_enabled sanitization
...
Moved powersaving_enabled to match serialization order
2025-12-24 11:23:19 +07:00
1706f759b7
Modified hasPendingWork to return bool
2025-12-24 11:00:34 +07:00
5c6c15942b
Added powersaving to all ESP32 boards with RTC-supported DIO1
...
Added CLI to enable/disable powersaving
2025-12-23 12:48:08 +07:00
27c92d2fe9
Update FAQ with new MeshCore applications and tx power settings for amped radios
...
Added entries for meshcore-pi and pyMC_Repeater to the FAQ
Added tx power settings for amped radios
2025-12-21 21:48:56 -08:00
245a818085
Fix TX LED stuck on when StartTransmit() fails
2025-12-20 23:15:41 +11:00
cc28b1a34d
EnvironmentSensorManager.cpp: Mitigate BME280 self-heating causing inaccurate readings.
2025-12-20 21:51:51 +11:00
6c993827de
Fixed T1000-E temperature and lux sensors
2025-12-19 23:51:36 +11:00
0c3fb918b2
Merge pull request #1203 from liquidraver/fix-gps-popup
...
Fix GPS/Buzzer toggle UI popup
2025-12-18 21:39:25 +13:00
e855706abb
move showalert after saveprefs
2025-12-17 21:27:22 +01:00
2ddd5ca0c3
Merge pull request #1235 from liquidraver/btfixv7
...
queue throttling + slave latency and minor refactor
2025-12-17 15:08:20 +01:00
cba29ea50c
queue throttling + slave latency and minor refactor
2025-12-17 13:46:58 +01:00
9b13106b6f
Merge pull request #1201 from fschrempf/nrf52-board-deduplication
...
NRF52 Board Code Deduplication
2025-12-17 11:29:33 +01:00
8eb229bcf8
variants: RAK4631: Enable DC/DC regulator to reduce power consumption
...
The RAK4631/RAK4630 module are able to use the DC/DC converter. Enable
it to reduce power consumption.
Signed-off-by: Frieder Schrempf <frieder@fris.de >
2025-12-17 10:39:55 +01:00
22b1585959
NRF52Board.h: Mark getMCUTemperature() as virtual
...
The function in the derived class is virtual per definition. Mark it
to make this clearer to the reader.
Signed-off-by: Frieder Schrempf <frieder@fris.de >
2025-12-17 10:39:54 +01:00
b024b9e1a1
Deduplicate NRF52 startOTAUpdate()
...
The startOTAUpdate() is the same for all NRF52 boards. Use a common
implementation for all boards that currently have a specific
implementation.
The following boards currently have an empty startOTAUpdate() for
whatever reasons and therefore are not inheriting NRF52BoardOTA to
keep the same state: Nano G2 Ultra, Seeed SenseCAP T1000-E,
Wio WM1110.
Signed-off-by: Frieder Schrempf <frieder@fris.de >
2025-12-17 10:30:50 +01:00
e3bb225efb
Deduplicate DC/DC regulator enable for NRF52 boards
...
Some NRF52 boards are able to use the internal power-efficient DC/DC
regulator. Add a new class that can be inherited by board classes to
enable this feature and reduce the power consumption.
Signed-off-by: Frieder Schrempf <frieder@fris.de >
2025-12-17 10:29:14 +01:00
93d1560d14
Use common NRF52 begin() and deduplicate() startup reason init
...
Use a common begin() method that can be called from derived classes
to contain the shared initialization code.
Signed-off-by: Frieder Schrempf <frieder@fris.de >
2025-12-17 10:26:57 +01:00
87b0e432bb
Deduplicate reboot() for NRF52 boards
...
The reboot() method is the same for all NRF52 boards. Use a shared
implementation.
Signed-off-by: Frieder Schrempf <frieder@fris.de >
2025-12-17 10:25:16 +01:00
6486192477
variants: IkokaNrf52Board: Use NRF52Board base class
...
Signed-off-by: Frieder Schrempf <frieder@fris.de >
2025-12-17 10:22:15 +01:00
d67f311c3d
Merge pull request #1206 from IoTThinks/MCdev-MCUTemperature-for-repeaters-202512
...
Added default temperature from ESP32 MCU and NRF52 MCU
2025-12-15 19:37:34 +11:00
2228214ded
Merge pull request #1216 from mattzzw/main
...
Update faq.md
2025-12-15 18:18:00 +13:00
2bcc9c10d2
Update faq.md
...
Fix typo
2025-12-14 18:29:49 +01:00
f38b951e87
Merge pull request #1142 from Meshcore-Portugal/jbrazio/2025_7bc6ab2c
...
Add devcontainer configuration for vscode
2025-12-13 09:07:05 +01:00
2deb9cf144
Fixed to call getMCUTemperature once.
2025-12-13 07:32:26 +07:00
0df8c86b98
Refactor devcontainer runArgs
2025-12-12 17:24:28 +00:00
aba868f324
Merge branch 'thinknode_m3_port' into dev
2025-12-12 17:20:06 +01:00
bde4fc3a23
thinknode_m3: initial commit
2025-12-12 17:16:28 +01:00
e7ed69bdb6
Merge branch 'thinknode_m6_port' into dev
2025-12-12 16:39:37 +01:00
14efaf6fd3
thinknode_m6: initial port
2025-12-12 16:37:57 +01:00
4504ad4daf
Added default temperature from ESP32 MCU and NRF52 MCU
...
Added NRF52Board.h and NRF52Board.cpp
Modified NRF52 variants to extend from NRF52Board to share common feature
2025-12-12 19:01:15 +07:00
9bba417ebc
Merge pull request #1160 from flol/rak11310
...
Support for RAK11310 WisBlock
2025-12-11 10:47:12 +11:00
Frieder Schrempf