04042e3ca0
Refactor serial bridge handling
2025-07-09 11:03:35 +01:00
3375389181
Merge remote-tracking branch 'upstream/dev' into jbrazio/2025_3f11ad35
2025-07-04 11:57:09 +01:00
3d2404f249
Merge pull request #479 from 446564/cleanup-xio-nrf
...
cleanup xiao nrf52
2025-07-04 16:18:14 +10:00
cf35daddc2
Merge pull request #481 from oltaco/heltecV3-gps_pin_fix
...
fix: Heltec V3 amended GPS pins
2025-07-04 15:49:08 +10:00
2bb7e6dad4
fix: heltec v3: change gps enable pin
2025-07-04 14:12:57 +10:00
74818d0594
fix: change GPS pins
...
Pin 45 and 46 are strapping pins on ESP32-S3, which can lead to unintended consequences on boot. I have amended the pins and added an enable pin as well.
2025-07-04 13:55:39 +10:00
484b7b8144
Merge pull request #476 from WattleFoxxo/xiao-rp2040
...
Adds support for the XIAO-RP2040 board
2025-07-04 10:08:31 +10:00
cb423bcb71
Merge pull request #471 from 446564/rak-usr-btn
...
move rak usr btn to companions
2025-07-04 10:03:26 +10:00
90656e7d06
clean up xiao nrf52
...
move variant specific code out of src/helpers
redefine RXEN for alternate radio pinout
2025-07-03 09:18:26 -07:00
d23378cff6
Add XIAO RP2040 support
2025-07-03 11:42:53 +10:00
ca422bbafb
fix ble pin
2025-07-02 14:37:11 -07:00
ad2e015a5b
move rak usr btn to companions
...
repeaters do not typically have user buttons and
there is only one analog pin available on most, if
not all, base boards. so this allows repeaters to
add custom peripherals or alternate battery signals
2025-07-02 10:24:45 -07:00
dcb7ffa92e
fixing radio include order for heltec paper
2025-07-02 08:32:36 -07:00
b80d99edd1
t1000e: set preamble to 16 at init
2025-07-01 15:42:54 +02:00
1d1bafb3eb
Merge pull request #455 from jquatier/wireless-paper
...
Initial Support for Heltec Wireless Paper
2025-07-01 15:23:58 +10:00
f8d277de83
Merge pull request #426 from 446564/feat-GH109
...
allows manual BLE pin even when device has display
2025-07-01 15:09:43 +10:00
387e2c7e74
Merge pull request #464 from oltaco/lilygo_t3s3-radio.std_init
...
refactor: lilygo_t3s3 with CustomSX1262::std_init()
2025-07-01 12:26:43 +10:00
a72fafcbf1
Merge branch 'main' into dev
2025-06-30 17:07:01 +10:00
c91356016b
Fixed MeshAdventurer repeater build failing
...
Update build_src_filter in platformio.ini
2025-06-30 05:40:07 +02:00
4541380632
Support MeshAdventurer
...
Added support for MeshAdventurer, including radio, display, button, GPS, voltage reading
2025-06-30 03:46:18 +02:00
c56da5e6aa
refactor: lilgo_t3s3 with CustomSX1262::std_init()
2025-06-30 08:51:18 +10:00
1bfa3d338c
Refactor radiolib for Heltec Wireless Tracker
...
Made changes and tested transmission and reception.
Note:
TX to T1000E would not work direct, but always went through a repeater.
TX to two Thinknode M1's went through direct..
2025-06-30 09:48:18 +12:00
2f77cef04b
Add config flags to variants
2025-06-29 16:28:11 +01:00
bcd31b7cdf
fix: missing dependency
2025-06-29 00:28:01 +02:00
9530744ff4
add support for BMP280 temperature+pressure sensor
2025-06-29 00:17:46 +02:00
5fa6533291
Merge branch 'ripplebiz:dev' into dev
2025-06-28 11:03:15 +02:00
1ce180d6ea
remove spi.begin in targets
2025-06-28 11:00:13 +02:00
ff3e888dfd
formatting
2025-06-27 23:30:52 -07:00
3bd1dc3ffa
* minor tidy ups
2025-06-28 16:10:53 +10:00
7c9cf2a5ee
Merge pull request #446 from cod3doomy/dev
...
RAK4631: BME680 add and GPS cleanup
2025-06-28 16:00:36 +10:00
e417c43c30
wireless paper board support
2025-06-27 22:57:49 -07:00
0e197254a2
remove old tbeam def
2025-06-27 17:38:07 +02:00
e16f5349fa
manual-merge tbeam conflicts
2025-06-27 15:30:01 +02:00
95e69cf273
RadioWrapper::std_init: add tbeam, unify coding style
2025-06-27 15:17:51 +02:00
f666b8c8cf
RadioWrapper::std_init: add missing definitions for rx/tx switching
2025-06-27 15:16:37 +02:00
07f25ccac8
sx1276 boards: migrate to std_init()
2025-06-27 15:12:48 +02:00
408ed549a8
wio-e5-sdk: adjust uart location
2025-06-26 13:04:15 +02:00
63247667d0
String removed
...
Removed all string type casting
2025-06-25 21:12:36 -07:00
c872f72584
Merge branch 'ripplebiz:dev' into dev
2025-06-25 21:08:38 -07:00
fe0234d208
Merge pull request #449 from recrof/dev
...
Station G2 refactor for radio.std_init, set max tx power to 19dBm
2025-06-26 13:10:06 +10:00
f15f32e138
Station G2 refactor for radio.std_init, set max tx power to 19dBm
2025-06-25 22:21:22 +02:00
387579922b
rak3x72: support variations in platformio.ini
2025-06-25 13:55:54 +02:00
556051955d
* ESP32Board: added support for Neopixel TX led
2025-06-25 14:54:13 +10:00
8191c0901b
* new variant board: Tenstar C3
2025-06-25 14:34:27 +10:00
001b996a24
RAK4631: BME680 add and GPS cleanup
...
- Added the BME680 environment sensor functionality
- Added the GPS Repeater env for those wanting it
- Cleaned up the GPS and other RAK4631SensorManager code
Verified build and functionality on normal and GPS repeater and companion envs.
IAQ readout is still a work in progress, but a placeholder can be seen on Channel 2 of the app telemetry.
2025-06-24 17:46:01 -07:00
d94f469d53
wio_e5_mini: led and rescue cli
2025-06-24 14:34:42 +02:00
84c2cfdcf2
fix: revert swapped GPS pins
...
reverted GPS pin behaviour and swapped GPS pins for tbeam variants.
2025-06-24 12:39:07 +10:00
6d8fae26da
Merge commit '299e85b830f4bf51c2e4d90e3e1bbb59025f608d' into dev
2025-06-24 12:05:00 +10:00
bd020c6167
* removed deprecated tbeam variant
2025-06-24 12:03:51 +10:00
299e85b830
Merge pull request #441 from oltaco/heltecv3-spi_begin_fix
...
fix: remove extra spi.begin() on heltec v3
2025-06-24 11:57:08 +10:00
João Brázio