Liam Cottle
1751783931
Merge pull request #3357 from skandragon/feat/picow-wifi-ble
...
Add WiFi to RPI PicoW (and perhaps others)
2026-09-09 21:55:22 +12:00
liamcottle
cee43752c7
add new ENABLE_WIFI_INTERFACE build flag for companions without providing ssid and pwd
2026-09-08 22:54:50 +12:00
liamcottle
6809fed159
simplify and remove 2 as a wifi enabled state
2026-09-08 21:30:17 +12:00
liamcottle
87a05e1589
allow remote management of wifi as user has cli permission
2026-09-08 18:33:37 +12:00
liamcottle
bf64fafe90
simplify response message
2026-09-08 18:30:00 +12:00
liamcottle
790680e4d1
allow toggling wifi enabled regardless of stored ssid
2026-09-08 18:25:34 +12:00
Michael Graff
7c2b4d88be
WiFi on/off tri-state: on when SSID set unless explicitly disabled; PicoW ships no default SSID
2026-09-06 22:18:00 -05:00
Michael Graff
eb2ab10de0
Add wifi.enabled pref and CLI; skip WiFi when disabled or SSID blank
2026-09-06 21:56:25 -05:00
Michael Graff
98cf4f3332
Add get wifi.status and get wifi.ip CLI commands
2026-09-06 21:44:47 -05:00
Michael Graff
b11a779843
Address review: per-variant wifi src, real SSID reply, rename PicoW env
2026-09-06 21:28:04 -05:00
Michael Graff
b9fa450f52
Fix review findings on Pico W WiFi/BLE
2026-09-06 20:43:37 -05:00
ripplebiz
89ef200efa
Merge pull request #3366 from recrof/companion-cli-fix-2
...
Companion CLI: fixed txdelay, direct.txdelay, agc.reset.interval, int.thresh
2026-09-07 10:42:48 +10:00
Rastislav Vysoky
5d82ed352c
Companion CLI: fixed txdelay, direct.txdelay, agc.reset.interval, int.thresh
2026-09-06 15:14:35 +02:00
Michael Graff
a4ac85a0d6
Address review findings on WiFi companion support
...
- scope the serial config CLI to RP2040; it was exposing the rescue CLI
(cat/rm/erase) on every ESP32 WiFi build, which gates it behind a
physical long-press
- bound and space out RP2040 rejoins: the core's join busy-waits, so cap
it at 5s and retry every 30s instead of every 10s
- stamp the reconnect timer in setup(), so the first loop() doesn't tear
down an association that is still finishing DHCP
- treat stored credentials as a pair, and pass NULL (not "") for an open
network
- teach build_as_lib.py where SerialWifiInterface moved
2026-09-05 23:15:13 -05:00
Michael Graff
739a67c9f1
Allow WiFi credentials to be set at runtime
...
Store ssid/pwd in NodePrefs and set them with 'set wifi.ssid' /
'set wifi.pwd' over USB serial; build-time WIFI_SSID/WIFI_PWD stay as
the fallback. Headless WiFi builds get the config CLI on Serial, which
is otherwise unused there.
2026-09-05 23:15:13 -05:00
Aleksei Mamlin
1d9a62ca4a
companion: get/set timezone offset for clock
...
* Add tz_offset companion prefs and get/set commands for companion cli
* Use tz_offset for clock on display
Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com >
2026-08-31 09:08:22 +03:00
fdlamotte
adbdcf00bb
Merge branch 'dev' into node_discover_ui
2026-08-29 11:02:58 -04:00
Scott Powell
6dad3d5ab4
* companion: fix for setSpreadFactor(). "set cad ..." and "board" now implemented.
2026-08-24 20:44:17 +10:00
Scott Powell
5a162ff4c6
* new DynamicConfigSerializer
...
* board/variant KeyValueStore now can write to 'custom' object in Json prefs
2026-08-24 17:12:56 +10:00
Scott Powell
47b0b7b3b8
* T096, and Station G3: refactoring the 'FEM' prefs to variant-specific code
...
* CommonCLI: 'FEM' commands removed
* introduced static no-op attachDynamicPrefs() for all boards
2026-08-24 01:50:22 +10:00
Florent
088ae3caeb
ui: opt-out for discover screen
2026-08-23 10:42:00 -04:00
Scott Powell
e485d01dcb
support for CMD_SEND_TXT_MSG and new TXT_TYPE_CLI_COMMAND
2026-08-23 22:49:45 +10:00
Scott Powell
2c0ace2519
* new TXT_TYPE_CLI_COMMAND (3)
2026-08-23 22:04:05 +10:00
Scott Powell
52306bfe0f
legacy queueMessage() case, eg. repeater replies
2026-08-23 20:07:28 +10:00
Scott Powell
f7c568e3d9
onCommandDataRecv() use '>' prefix for CLI replies.
2026-08-23 20:03:49 +10:00
Scott Powell
21179760d3
"Unknown command" replies
2026-08-23 19:35:43 +10:00
Scott Powell
41588d8052
* adding new CommonRadioPrefs
...
* refactor: moving various radio CLI handling to CommonRadioPrefs
2026-08-23 14:45:15 +10:00
Florent
52f0362c09
ui: repeater discover screen
2026-08-21 18:24:46 -04:00
Scott Powell
afb969ccca
* initial wiring/routing of CLI commands to companion (either via app/serial interface, or remotely via txt message)
2026-08-21 20:55:57 +10:00
liamcottle
67d6d42a4c
fix for 3-byte paths passed to CMD_SEND_RAW_DATA
2026-08-19 18:59:24 +12:00
Scott Powell
0cce9197a1
Fix for CMD_SEND_RAW_DATA and multi-byte paths
2026-08-18 13:11:15 +10:00
agessaman
e2aa7b98f9
feat(companion_radio): add external FEM gain preferences for RX and TX for companions
...
Introduced consistent preferences for external LoRa FEM RX and TX gain settings in NodePrefs. Updated companion MyMesh to apply these settings during initialization and transmission. Added unit tests to verify the round-trip serialization of these new preferences.
2026-08-10 11:59:26 -07:00
liamcottle
dee133d647
disable cad on companion until it's configurable
2026-08-07 00:19:18 +12:00
Scott Powell
2189f2294c
* added prefs initialisers to match original zeroed state
2026-07-18 19:22:53 +10:00
Scott Powell
f515716032
* new NodePrefs for companion
2026-07-17 16:05:10 +10:00
Jaroslav Škarvada
15e259c572
Added MCU temp sensor to the companion
...
Fixes #2896
2026-07-14 17:43:33 +02:00
Wessel Nieboer
7c8e092457
Have CAD be a separate toggle (set cad on/off)
2026-06-14 15:20:58 +02:00
Wessel Nieboer
4f9a091671
Use hardware channel activity detection for checking interference
2026-06-14 15:19:18 +02:00
Scott Powell
2e73fe948e
* fix for anon lastmod
2026-06-14 18:54:51 +10:00
Scott Powell
07648e3344
* fix for anon contacts when full
2026-06-14 17:50:41 +10:00
liamcottle
ae0bb7ee95
use releasePacket instead of _mgr->free
2026-06-09 00:42:58 +12:00
liamcottle
07bfe90695
free packet on parse failure
2026-06-09 00:31:48 +12:00
Liam Cottle
da21d42a2e
Merge pull request #2672 from meshcore-dev/non-contact-requests
...
Non contact requests
2026-06-04 16:05:47 +12:00
Sefinek
cc05ae555a
docs: fix typos, grammar, and formatting in FAQ and code comments
2026-06-02 22:12:18 +02:00
Scott Powell
83ad3a6dc0
* direct/zero hop by default
2026-06-02 15:32:28 +10:00
Liam Cottle
94063f6833
Merge pull request #2636 from sefinek/fix/cmd-device-query-typo
...
fix: rename CMD_DEVICE_QEURY to CMD_DEVICE_QUERY
2026-06-02 12:41:57 +12:00
Scott Powell
bc5d648204
* contacts sync fix
...
* fix for reusing transient/anon contacts only
2026-06-01 19:04:42 +10:00
Scott Powell
d9df8307ca
* first draft
2026-06-01 16:49:31 +10:00
Scott Powell
b259fbd01b
* power saving: hasPendingWork() now also checks if there's a pending contacts write
2026-05-31 18:52:42 +10:00
ripplebiz
54c111609a
Merge pull request #2286 from IoTThinks/MCdev-PowerSaving-for-nrf52-companion-202604
...
Added Power Saving for NRF52 companions to have extra 30% battery life
2026-05-31 18:49:46 +10:00
Liam Cottle