f25d7a882a
fix: Align channel data framing
...
ref: #1928
2026-03-18 20:14:22 +01:00
a21b83b127
fix: address comments
...
ref:
2026-03-18 20:09:11 +01:00
9b84278607
feat: Add support for PAYLOAD_TYPE_GRP_DATA
...
Docs changes are to reflect how it is currently in fw
This adds ability to send datagram data to everyone in channel
2026-03-18 20:08:52 +01:00
83b7a95679
Merge pull request #2 from weebl2000/2026/remote-lna
...
Make sure LR1110 builds
2026-03-16 09:55:00 +00:00
92bef49c55
Merge branch 'dev' into 2026/remote-lna
2026-03-16 09:40:10 +00:00
274e00df50
Merge remote-tracking branch 'upstream/dev' into 2026/remote-lna
2026-03-16 09:37:55 +00:00
0e62240119
Set AUTO_OFF_MILLIS to 0 for E213, E290
2026-03-15 15:51:31 +01:00
696323c11b
Fix Heltec E213 and E290 e-ink board builds
2026-03-15 15:51:25 +01:00
9af332b6e6
Make sure LR1110 builds
2026-03-13 13:48:36 +01:00
bb8dc5b55b
Merge branch 'main' into dev
2026-03-12 18:14:56 +11:00
792f299986
Merge pull request #1873 from Specter242/codex/sensecap-solar-led-poweroff-parity
...
sensecap solar: add poweroff/shutdown support and nrf52 PM parity
2026-03-12 18:13:14 +11:00
a56419dc21
R1 Neo: Turn off debugging, rtc cleanup
2026-03-11 18:24:01 -07:00
8ac8c4d59d
Merge pull request #1991 from weebl2000/prevent-auto-restart-ble-nrf52
...
Prevent auto-restarting BLE when disabling it on nRF52
2026-03-11 22:05:25 +13:00
8a3262cd70
Merge pull request #1483 from ssp97/dev
...
fix: avoid redundant redefinition of SX126X_DIO3_TCXO_VOLTAGE
2026-03-11 21:49:31 +13:00
a10476efd7
Merge pull request #1845 from lincomatic/repeaterbaud
...
don't limit bridge_baud to 115200
2026-03-11 11:51:00 +13:00
e3afbf975e
Prevent auto-restarting BLE when disabling it on nRF52
...
If client is still connected, client would automatically reconnect
immediately thus keeping BLE on
fixes #1933
2026-03-10 14:31:58 +01:00
5d1f5139ae
Support for muzi works R1 Neo device.
...
Support for R1 Neo hardware. New variant and baseboard class.
* Known issues:
- power management is not currently supported
- power off via long button press is not implemented
Add support for Epson Seiko RX8130CE I2C Real-time clock.
2026-03-08 11:46:20 -07:00
2715d3a113
* Dispatcher::next_tx_time init fix
2026-03-08 23:58:28 +11:00
cf0cc851d4
Merge pull request #1297 from ViezeVingertjes/feature/duty-cycle-token-bucket
...
Implement token bucket duty cycle enforcement
2026-03-08 23:54:32 +11:00
a434f9eff5
simplified the calls
2026-03-08 05:37:49 +11:00
29be7e293c
Merge pull request #1877 from DanielNovak/fix-countbefore-sentinel-regression
...
Fix countBefore regression: replace sentinel with getOutboundTotal()
2026-03-07 18:48:02 +11:00
aad56bb334
Merge pull request #1936 from Quency-D/dev-heltec-tracker-v2
...
Update Heltec Tracker v2 to version KCT8103L.
2026-03-07 17:59:19 +13:00
5dddb8a3a1
Merge pull request #1350 from weebl2000/sync-gps-time-30min
...
Sync gps time every 30min
2026-03-07 17:11:07 +13:00
6fd8c28522
Cache preamble SF to avoid redundant setPreambleLength() on every TX
2026-03-07 12:48:22 +11:00
cdca79540f
Update Heltec Tracker v2 to version KCT8103L.
2026-03-06 14:19:07 +08:00
9a95e25ef2
Remove unused RX boosted gain mode functions and related preprocessor directives across multiple variants
2026-03-05 18:38:57 +00:00
f858f2e4bb
Rename sx126x_rx_boosted_gain to rx_boosted_gain
2026-03-05 18:14:47 +00:00
8df87d5609
Merge remote-tracking branch 'upstream/dev' into 2026/remote-lna
2026-03-05 17:21:38 +00:00
a61add2e6a
Update preamble dynamically to match runtime SF changes via CLI
2026-03-05 22:14:22 +11:00
534a0c97a7
Increased preamble to 32 for <sf9 and left at 16 for sf9 and above
2026-03-05 21:39:14 +11:00
e233346bf0
* repeater: new "get/set loop.detect {off | minimal | moderate | strict }"
2026-03-05 16:26:09 +11:00
dc9e7abacc
Merge pull request #1490 from mesher-de/feature-0hop-cli
...
Add CLI-command for zerohop advert
2026-03-05 15:24:48 +13:00
044c66e261
Merge pull request #1001 from kallanreed/fix_gps_debug_logging
...
Use correct macro for GPS logging test
2026-03-05 13:14:37 +13:00
10f2fecd45
Sync time with GPS every 30 minutes
...
Unless your GPS is being spoofed there isn't really a downside to
syncing more often with GPS.
I understand the RTC is very stable, but especially with powersaving now
clock drift is worse, we should sync more often.
2026-03-03 15:44:55 +01:00
cdd3d5f34e
Merge pull request #1841 from weebl2000/nit-prefs
...
prefs is 5 char length :nerd:
2026-03-04 01:39:55 +13:00
7c594ebc50
Merge pull request #1743 from weebl2000/fixagcreset
...
fix agc reset on SX126x, SX1276 & LR11x0 chips
2026-03-03 22:19:34 +11:00
d7ad89046b
Merge pull request #1633 from weebl2000/fix/gps-uart-power-leak
...
Fix GPS UART consuming +8mA when disabled (nRF52)
2026-03-03 23:26:58 +13:00
2cb08775c0
Clarify comment wording: 1 = direct (0 hops)
...
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com >
2026-03-03 08:40:17 +01:00
c016db86d5
Address PR review: subtract-1 encoding and clamp max_hops
...
- Change > to >= so stored value 1 means direct/0-hop only (liamcottle)
- Clamp max_hops to 63 on write since getPathHashCount() caps at 63 (robekl)
- Update comments to reflect encoding: 0=no limit, 1=direct only, N=up to N-1 hops
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com >
2026-03-03 08:37:22 +01:00
00566741f6
Add configurable max hops filter for auto-add contacts
...
Filter auto-add of new contacts by hop count (issues #1533 , #1546 ).
Setting is configurable from the companion app via extended
CMD_SET/GET_AUTOADD_CONFIG protocol (0 = no limit, 1-63 = max hops).
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com >
2026-03-02 20:41:41 +01:00
0d87dcc989
Also fix countBefore(0xFFFFFFFF) to return _num
...
The signed comparison in countBefore breaks for the max uint32_t value.
Even though callers now use getOutboundTotal(), the function itself
should be correct for all inputs.
2026-03-01 07:41:50 +01:00
8a9a0dca5f
Fix GPS +8mA power leak when disabled (nRF52)
...
On the T114, GPS_RESET (pin 38) is the same pin as PIN_3V3_EN.
MicroNMEALocationProvider::begin() sets pin 38 HIGH (powering the 3V3
rail) but stop() never set it back LOW, leaving the GPS module powered
even when disabled.
Assert reset pin in stop() to mirror begin(), and guard
_location->loop() behind gps_active check.
Fixes meshcore-dev/MeshCore#1628
2026-02-28 19:13:42 +01:00
9bae9d0ed2
fix comment, we know the band now after checking LR1110 user manual
2026-02-28 19:09:25 +01:00
85f764a114
Calibrate configured frequency for AGC reset
2026-02-28 19:09:25 +01:00
f54948e06d
Also implement LR11x10 AGC reset
...
Similar to SX126x but simpler.
2026-02-28 19:09:25 +01:00
b2032e11b6
make it more dry
2026-02-28 19:09:25 +01:00
9106ab46e1
reset noise_floor sampling after agc reset
2026-02-28 19:09:25 +01:00
a2dc2eb50c
when doing AGC reset, call Calibrate(0x7F)
...
1. warm sleep
2. wake to stdby
3. Calibrate(0x7F) to reset all internal blocks
4. re-apply DIO2 RF / boosted gain & register patch to make sure
everything is as it was
2026-02-28 19:09:25 +01:00
f81ec4b14c
fix agc reset
2026-02-28 19:09:25 +01:00
d9e67222f5
prefs is 5 char length :nerd:
2026-02-28 19:07:38 +01:00
Janez T