771 Commits

Author	SHA1	Message	Date
Scott Powell	b6110eee38	* new req/resp (after login): REQ_TYPE_GET_OWNER_INFO (includes firmware-ver) ... * ANON_REQ_TYPE_OWNER, firmware-ver removed (security exploit) * ANON_REQ_TYPE_BASIC, formware-ver removed, just remote clock + some 'feature' bits * CTL_TYPE_NODE_DISCOVER_REQ now ingored if 'repeat off' has been set	2026-01-12 16:58:35 +11:00
Scott Powell	65796c8f20	* CommonCLI: added "set name ..." validation ... * ANON_REQ_TYPE_VER_OWNER, now removes commas from node_name	2026-01-09 16:28:08 +11:00
Scott Powell	5475043083	* new ANON_REQ_TYPE_VER_OWNER ... * CommonCLI: new "get/set owner.info ..."	2026-01-09 11:07:31 +11:00
Scott Powell	8d51126956	Merge branch 'dev' into regions-request	2026-01-08 00:21:08 +11:00
ripplebiz	3eaaf96ed3	Merge pull request #1300 from fschrempf/fix-rak4631-gps ... Fix RAK4631 GPS Detection	2026-01-07 14:56:58 +11:00
ripplebiz	09005fa455	Merge pull request #1308 from liamcottle/fix/wifi-interface-frames ... Fix: WiFi Interface Frame Parsing	2026-01-04 16:19:57 +11:00
liamcottle	8708fa012a	simplify reading frame header	2026-01-04 17:43:25 +13:00
cj-vana	63767cdb7d	Fix typos in README and source comments	2026-01-03 18:54:48 -07:00
liamcottle	71bb49e556	remove use of dynamic allocation	2026-01-03 16:36:19 +13:00
liamcottle	ed263b0727	implement frame header parising for wifi interface	2026-01-03 15:39:57 +13:00
Scott Powell	3af25495bb	* Repeater: new anon request sub-type: ANON_REQ_TYPE_REGIONS (rate limited to max 4 every 3 mins) ... * Companion: new CMD_SEND_ANON_REQ command (reply with existing RESP_CODE_SENT frame)	2026-01-03 12:02:15 +11:00
Frieder Schrempf	ab7935142c	EnvironmentSensorManager.cpp: Cleanup after failed RAK4631 GPS detection ... If no GPS was detected, revert the hardware to the initial state, otherwise we may see conflicts or increased power consumption on some boards. Signed-off-by: Frieder Schrempf <frieder@fris.de>	2025-12-31 14:42:42 +01:00
Frieder Schrempf	e79ee11872	EnvironmentSensorManager.cpp: Fix RAK4631 serial GPS detection ... Serial1 is always true. If we want to check for the presence of a GPS receiver, we need to check if any data was received. Signed-off-by: Frieder Schrempf <frieder@fris.de>	2025-12-31 14:42:41 +01:00
ripplebiz	f9720f0b0c	Merge pull request #1266 from IoTThinks/MCdev-Powersaving-for-esp32-202512 ... Added powersaving to all ESP32 boards with RTC-supported DIO1	2025-12-31 11:35:46 +11:00
Kevin Le	d911a34eeb	Used esp_wifi_get_mode instead of WiFi.getMode() to reduce the code size	2025-12-29 22:38:05 +07:00
Kevin Le	33b1e7edb9	Added pad after powersaving_enabled	2025-12-29 21:49:13 +07:00
ripplebiz	8edbb085fb	Merge pull request #1254 from entr0p1/tx-led-fix-v2 ... Fix TX LED stuck on when StartTransmit() fails	2025-12-29 16:09:08 +11:00
ripplebiz	1c594d4cbd	Merge pull request #1274 from IoTThinks/MCdev-FixedMCUTemperature ... To fix MCU Temperature for repeaters	2025-12-29 15:05:31 +11:00
ripplebiz	1d9d37c654	Merge pull request #1247 from entr0p1/dev ... Fixed T1000-E temperature, lux and BME280 sensor reading accuracies	2025-12-29 12:42:05 +11:00
Scott Powell	90d1e87ba1	* check for 'early receive' ACK	2025-12-27 20:46:28 +11:00
Kevin Le	0b30d2433f	To get and average the temperature so it is more accurate, especially in low temperature	2025-12-27 15:25:21 +07:00
Kevin Le	def1902688	Fixed T-Beam board to work with sleep	2025-12-24 12:04:39 +07:00
Kevin Le	0d11a02e71	Added extra check for P_LORA_DIO_1 before going to sleep	2025-12-24 11:47:19 +07:00
Kevin Le	89a289eb22	Added powersaving_enabled sanitization ... Moved powersaving_enabled to match serialization order	2025-12-24 11:23:19 +07:00
Kevin Le	5c6c15942b	Added powersaving to all ESP32 boards with RTC-supported DIO1 ... Added CLI to enable/disable powersaving	2025-12-23 12:48:08 +07:00
entr0p1	245a818085	Fix TX LED stuck on when StartTransmit() fails	2025-12-20 23:15:41 +11:00
entr0p1	cc28b1a34d	EnvironmentSensorManager.cpp: Mitigate BME280 self-heating causing inaccurate readings.	2025-12-20 21:51:51 +11:00
fdlamotte	2ddd5ca0c3	Merge pull request #1235 from liquidraver/btfixv7 ... queue throttling + slave latency and minor refactor	2025-12-17 15:08:20 +01:00
liquidraver	cba29ea50c	queue throttling + slave latency and minor refactor	2025-12-17 13:46:58 +01:00
Frieder Schrempf	22b1585959	NRF52Board.h: Mark getMCUTemperature() as virtual ... The function in the derived class is virtual per definition. Mark it to make this clearer to the reader. Signed-off-by: Frieder Schrempf <frieder@fris.de>	2025-12-17 10:39:54 +01:00
Frieder Schrempf	b024b9e1a1	Deduplicate NRF52 startOTAUpdate() ... The startOTAUpdate() is the same for all NRF52 boards. Use a common implementation for all boards that currently have a specific implementation. The following boards currently have an empty startOTAUpdate() for whatever reasons and therefore are not inheriting NRF52BoardOTA to keep the same state: Nano G2 Ultra, Seeed SenseCAP T1000-E, Wio WM1110. Signed-off-by: Frieder Schrempf <frieder@fris.de>	2025-12-17 10:30:50 +01:00
Frieder Schrempf	e3bb225efb	Deduplicate DC/DC regulator enable for NRF52 boards ... Some NRF52 boards are able to use the internal power-efficient DC/DC regulator. Add a new class that can be inherited by board classes to enable this feature and reduce the power consumption. Signed-off-by: Frieder Schrempf <frieder@fris.de>	2025-12-17 10:29:14 +01:00
Frieder Schrempf	93d1560d14	Use common NRF52 begin() and deduplicate() startup reason init ... Use a common begin() method that can be called from derived classes to contain the shared initialization code. Signed-off-by: Frieder Schrempf <frieder@fris.de>	2025-12-17 10:26:57 +01:00
Frieder Schrempf	87b0e432bb	Deduplicate reboot() for NRF52 boards ... The reboot() method is the same for all NRF52 boards. Use a shared implementation. Signed-off-by: Frieder Schrempf <frieder@fris.de>	2025-12-17 10:25:16 +01:00
Kevin Le	4504ad4daf	Added default temperature from ESP32 MCU and NRF52 MCU ... Added NRF52Board.h and NRF52Board.cpp Modified NRF52 variants to extend from NRF52Board to share common feature	2025-12-12 19:01:15 +07:00
agessaman	b91b854a1d	fix output from LPS22HB: convert barometric pressure from kPa to hPa in EnvironmentSensorManager	2025-12-08 19:53:33 -08:00
Scott Powell	676c317f78	* refactor: on-demand getSharedSecret()	2025-12-06 19:17:45 +11:00
ripplebiz	46f6146df7	Merge pull request #1180 from oltaco/shared-secret-on-demand ... Companion: Faster startup by calculating shared_secret on demand	2025-12-06 18:59:19 +11:00
Scott Powell	d7adcc136b	* LPPDataHelpers, readCurrent() signed value	2025-12-06 16:49:25 +11:00
taco	638f41d143	calculate shared_secret on demand	2025-12-06 16:21:17 +11:00
ripplebiz	9ee3008f88	Merge pull request #1177 from liquidraver/btfixv6 ... Fix BLE semaphore leak and improve SerialBLEInterface	2025-12-06 14:23:27 +11:00
Christophe Vanlancker	01eb8716af	fix(core): optimize GPS loop and add display GPIO safeguards	2025-12-05 20:45:10 +01:00
liquidraver	73ab0d8813	Improve SerialBLEInterface	2025-12-05 07:39:48 +01:00
ripplebiz	c77391c5dd	Merge pull request #1169 from Meshcore-Portugal/jbrazio/2025_db83f76e ... Bridge: Fix RAK4631 GPS conflict and add T114 RS232 targets	2025-12-03 13:43:19 +11:00
João Brázio	69a9a0bce9	Bridge: Add t114 rs232 targets	2025-12-02 10:31:24 +00:00
csrutil	df3cb3d192	_location->loop() should be in the next tick	2025-11-29 20:29:52 +08:00
csrutil	62e180dc0f	changed ms to sec	2025-11-29 19:02:00 +08:00
csrutil	88fb173297	add configurable GPS update interval ... Make GPS update interval configurable via settings instead of using hardcoded 1 second value. The interval is persisted from preferences and can be adjusted at runtime through the sensor manager settings interface	2025-11-29 17:20:21 +08:00
ripplebiz	fe874032d5	Merge pull request #1153 from fdlamotte/thinknode_m5 ... Thinknode m5 support	2025-11-29 12:13:30 +11:00
Florent	1c0017b634	thinknode_m5: gps support	2025-11-28 13:15:11 +01:00