Without ROOM_PASSWORD the guest password defaults to empty, and a client
sending a blank password is granted read+write access (can post). Every
other board's room_server env sets ROOM_PASSWORD; the ThinkNode M6 and M1
were the only two shipping an open room. Default them to "hello" to match
the rest of the tree; operators can still change it at runtime with
'set guest.password'.
The M6 is the only board whose simple_repeater env ships with MESH_DEBUG=1
and GPS_NMEA_DEBUG=1 enabled. MESH_DEBUG=1 adds a 5-second boot delay
(examples/simple_repeater/main.cpp) plus verbose per-packet serial prints on
the hot RX/TX path; GPS_NMEA_DEBUG=1 echoes every GPS UART character to the
serial console (MicroNMEALocationProvider.h). Every sibling repeater env
(M1, M3, t1000-e, RAK, Heltec) ships these off, and the M6 room_server env
in this same file already has them commented. Comment them out to match.
External watchdog support was added (but never merged) for MeshTower V1. The update's V2's #defines to follow the conventions set there and piggy back off the support already written for V1.
While working on some sensor code implementations, I ran into
some hard crashes that root-caused to the 4KB loop task stack
being exhausted.
Looking for various optimization schemes resulted in this relatively
low-lift fix. RAK3401 and RAK4631 both support hardware crypto.
Rather than loading in one of the two software crypto libs,
we can just use the onboard hardware. This is faster, should
consume less power, and in testing used a scant up to 700
bytes in the run loop vs 2.5-3KB per advert.
This change **only** affects advert verification processing, which
currently consumes a significant chunk of the 4KB run loop.
I figured such a change should likely be implemented in phases.
After soaking, this hardware crypto verification
process could be implemented across the entire MeshCore
cryptographic function on RAK nodes. Also possible other nodes
have available hardware crypto, however, I have not checked,
so future improvements may also exist there.
Tested on:
- RAK3401 RAK 1W
- RAK4631 19001
Nick Dunklee