realtag
87c78a98bd
discover.neighbors sends a tagged repeater discovery request and only accepts matching repeater responses
2026-02-17 01:04:14 +00:00
realtag
e8785dd9b0
discover sends a single repeater discovery request and populates the neighbor list; self is excluded
2026-02-17 00:41:24 +00:00
Scott Powell
e2571accbe
* ver 1.13.0
2026-02-15 17:24:37 +11:00
ripplebiz
a6e741e30e
Merge pull request #1672 from ChaoticLeah/feature/mute-buzzer-icon
...
Add muted icon to show when buzzer is muted
2026-02-15 15:54:33 +11:00
Scott Powell
0abac35744
* client_repeat state now in _DEVICE_INFO response
2026-02-14 16:45:41 +11:00
Scott Powell
564a19d125
* companion client repeat mode support
2026-02-14 15:50:06 +11:00
Leah
fb025fb67e
Add muted icon to show when buzzer is muted
2026-02-11 10:00:20 +01:00
liamcottle
bafa2ccd22
fix estimated timeout for multi byte path traces
2026-02-10 17:01:30 +13:00
ripplebiz
248c3107b4
Merge pull request #1605 from ViezeVingertjes/kiss-modem-spec-compliance
...
Kiss modem spec compliance
2026-02-09 16:45:20 +11:00
ripplebiz
f6fc05601c
Merge pull request #1609 from weebl2000/bridge-always-has-work
...
Bridge always has work (prevents sleep)
2026-02-08 22:42:05 +11:00
Liam Cottle
10eacc4e95
Merge pull request #1316 from weebl2000/allow-negative-tx
...
Allow negative tx
2026-02-08 12:43:10 +13:00
Wessel Nieboer
e8646f5ede
Parse as signed int
2026-02-07 16:58:06 +01:00
agessaman
776131e263
simplify kiss noise floor sampling
2026-02-07 07:42:52 -08:00
Wessel Nieboer
c4c287d01b
Bridge always has work (prevents sleep)
2026-02-07 15:39:24 +01:00
ViezeVingertjes
f6ebbd978e
Remove redundant locals in handleSetRadio
2026-02-07 14:32:11 +01:00
ViezeVingertjes
5157daf1c1
Remove individual HW_RESP_* defines, use HW_RESP() macro directly
2026-02-07 14:24:34 +01:00
ViezeVingertjes
00b44c4114
Remove redundant send/complete/finished callbacks, use Radio interface directly
2026-02-07 14:22:21 +01:00
ViezeVingertjes
5ccd99e25f
Add toggleable per-packet signal reporting
2026-02-07 10:21:36 +01:00
ViezeVingertjes
7982d1ce1f
Use high-bit convention for hardware response codes
2026-02-07 10:21:32 +01:00
ViezeVingertjes
49e7516145
Add KISS UART support
2026-02-07 08:51:52 +01:00
agessaman
f445b5acdc
fix(kiss_modem): improve RX delivery and noise floor sampling
2026-02-07 08:51:52 +01:00
ViezeVingertjes
02ddc05c30
Reorganise KISS protocol to close gaps.
2026-02-07 08:51:52 +01:00
ViezeVingertjes
f78617dbdb
Add periodic noise floor calibration and AGC reset
2026-02-07 08:51:52 +01:00
ViezeVingertjes
5dcc377b77
Rewrite KISS modem to be fully spec-compliant
2026-02-07 08:51:52 +01:00
ripplebiz
c1c9848569
Merge pull request #1596 from jbrazio/2026/t114-sensors
...
Refactor Heltec T114 sensor management
2026-02-07 14:17:15 +11:00
ripplebiz
6502067368
Merge pull request #1591 from agessaman/fix-kiss-noise-floor
...
fix(kiss): periodic noise floor calibration and AGC reset
2026-02-07 14:08:26 +11:00
Wessel Nieboer
d0720c63c2
Allow negative tx power
...
Like SX1262 allows -9 dBm lowest, some allow lower but that probably
isn't useful
2026-02-06 02:24:51 +01:00
Adam Gessaman
c0b81b9ad8
Clean up comments on kiss noise floor changes.
2026-02-05 09:46:30 -08:00
João Brázio
18473333df
Merge remote-tracking branch 'upstream/dev' into 2026/t114-sensors
2026-02-05 13:36:22 +00:00
João Brázio
5cb26b91f6
Refactor Heltec T114 sensor management
2026-02-05 13:35:04 +00:00
ripplebiz
76a46a74e9
Merge pull request #1562 from oltaco/nrf52-sleep-repeater
...
Add Low-Power Sleep for nRF52 Boards
2026-02-05 13:16:47 +11:00
ripplebiz
4b9d5462bb
Merge pull request #1532 from oltaco/esp32board.h-removewifi
...
Refactor ESP32Board.h to save ~500 bytes of DRAM
2026-02-05 13:09:04 +11:00
agessaman
0fb570338f
fix(kiss): periodic noise floor calibration and AGC reset
...
- Trigger noise floor calibration every 2s and AGC reset every 30s in main loop.
- Reorder loop to match Dispatcher: calibrate + radio.loop() before AGC reset
and recvRaw() so RSSI is never sampled right after startReceive().
- Update protocol doc with calibration intervals and typical noise floor range.
- Variant platformio.ini updates (heltec_v3, rak4631).
2026-02-03 20:58:39 -08:00
taco
598489be47
refactor ui with ring buffer and display most recent
2026-02-04 09:38:05 +11:00
ripplebiz
e03f311e51
Merge pull request #1545 from ViezeVingertjes/kiss-modem-firmware
...
Add KISS-like Modem example and protocol documentation
2026-02-03 12:33:19 +11:00
ViezeVingertjes
f0ba14ff75
Remove sync word handling from KissModem.
2026-02-02 18:05:26 +01:00
taco
a342ab8437
nrf52: allow repeater to sleep when idle
2026-02-01 14:51:27 +11:00
ViezeVingertjes
240b5ea1e3
Refactor KissModem to integrate radio and sensor management directly, removing callback dependencies.
2026-01-31 15:15:19 +01:00
ViezeVingertjes
1bcb52bab3
Add new commands and responses for RSSI, channel status, airtime, noise floor, statistics, battery, and sensors.
2026-01-31 15:05:25 +01:00
taco
8d5eaf500d
add makeBlobPath inline helper for esp32
2026-02-01 00:02:30 +11:00
taco
e6e1b810f8
add DataStore::deleteBlobByKey()
2026-02-01 00:02:29 +11:00
ViezeVingertjes
c786cfe613
Add KISS Modem firmware
2026-01-31 10:22:32 +01:00
Liam Cottle
06a83c0453
Merge pull request #1531 from agessaman/add-recv-errors-stats
...
Add recv_errors to CMD_GET_STATS STATS_TYPE_PACKETS response
2026-01-30 20:57:07 +13:00
agessaman
019bbf74d3
Add recv_errors to CMD_GET_STATS STATS_TYPE_PACKETS response
...
Append uint32_t recv_errors (RadioLib receive/CRC errors) to packet stats
binary frame. Frame size 26 -> 30 bytes. Update stats_binary_frames.md and
Python/TypeScript parsing examples for backward compatibility (accept >=26).
2026-01-29 20:44:11 -08:00
taco
c7eea3915d
fix: remove esp_wifi.h from esp32board.h
...
saves ~500 bytes of dram and allows Tbeam to compile again
2026-01-30 15:07:40 +11:00
ripplebiz
cf7d95c6de
Merge pull request #1509 from stevenlafl/tbeam-1w
...
Add LilyGO T-Beam 1W Support
2026-01-30 14:55:17 +11:00
Rastislav Vysoky
c345f1da8e
Revert "Remove _serial->isConnected() logic from buzzer notifications"
2026-01-30 00:12:04 +01:00
Scott Powell
465776d667
* ver 1.12.0
2026-01-29 21:12:31 +11:00
Steven Linn
44e7c092c8
Add battery min/max voltage parameter support
2026-01-28 22:24:49 -07:00
ripplebiz
d81616ec68
Merge pull request #1476 from mattzzw/region_via_LoRa
...
Add cli command `region list {allowed|denied}`, enable output of region cmd via remote cli
2026-01-27 11:07:22 +11:00
