Scott Powell
a66773bac0
* CommonCLI: added "get/set path.hash.mode "
2026-02-23 14:25:19 +11:00
Scott Powell
3e76161e9c
* refactor of Contact/Client out_path_len (stored in files), from signed to unsigned byte (+2 squashed commits)
...
Squashed commits:
[f326e25] * misc
[fa5152e] * new 'path mode' parsing in Dispatcher
2026-02-21 19:35:51 +11:00
Liam Cottle
bbc5f0c11a
Merge pull request #1718 from realtag-github/repeater-v1.13-implement-discover
...
discover sends a single repeater discovery request and populates the neighbor list; self is excluded
2026-02-17 23:53:28 +13:00
Scott Powell
2e00298128
* companion: retransmit delays now hard-coded (only for client repeat mode)
2026-02-17 20:25:56 +11:00
Scott Powell
5de3e1bf32
* repeater: slight increase to default direct.txdelay
2026-02-17 20:10:13 +11:00
3DPGG
3e53df5082
Fix LilyGo_TLora_V2_1_1_6_terminal_chat build
...
This change addresses two issues. The first is that the
LilyGo_TLora_V2_1_1_6_terminal_chat build would try to compile
simple_repeater/MyMesh.cpp. All other examples of terminal chat
targets are instead building simple_secure_chat/main.cpp . This
change would align this build to the rest of the builds.
The second issue, found during the course of investigating the
first, stems from simple_repeater/MyMesh.cpp using the
MAX_NEIGHBOURS #define to control whether the neighbor list is kept.
Repeaters that keep this list must define this value, and if the
value is not defined, then all neighbor-related functionality is
compiled out. However, the code that replies to
REQ_TYPE_GET_NEIGHBOURS did not properly check for this #define,
and thus any target that compiles simple_repeater/MyMesh.cpp
without defining MAX_NEIGHBOURS would get an undefined variable
compilation error.
As a practical matter though, there are no targets that compile
simple_repeater/MyMesh.cpp AND do not define MAX_NEIGHBOURS,
except this build due to the first issue. As a result, the
second issue is addressed only as a matter of completeness. The
expected behavior with this change is that such a repeater would
send a valid reply indicating zero known neighbors.
2026-02-16 18:10:29 -08:00
realtag
0770618ee2
Allow repeater discovery even if repeater mode is disabled on the requesting repeater.
2026-02-17 01:39:04 +00:00
realtag
bf9c6cb50f
Increased the timeout timer to 60 seconds, up from 30 seconds.
2026-02-17 01:22:17 +00:00
realtag
87c78a98bd
discover.neighbors sends a tagged repeater discovery request and only accepts matching repeater responses
2026-02-17 01:04:14 +00:00
realtag
e8785dd9b0
discover sends a single repeater discovery request and populates the neighbor list; self is excluded
2026-02-17 00:41:24 +00:00
Scott Powell
e2571accbe
* ver 1.13.0
2026-02-15 17:24:37 +11:00
ripplebiz
a6e741e30e
Merge pull request #1672 from ChaoticLeah/feature/mute-buzzer-icon
...
Add muted icon to show when buzzer is muted
2026-02-15 15:54:33 +11:00
Scott Powell
0abac35744
* client_repeat state now in _DEVICE_INFO response
2026-02-14 16:45:41 +11:00
Scott Powell
564a19d125
* companion client repeat mode support
2026-02-14 15:50:06 +11:00
Leah
fb025fb67e
Add muted icon to show when buzzer is muted
2026-02-11 10:00:20 +01:00
liamcottle
bafa2ccd22
fix estimated timeout for multi byte path traces
2026-02-10 17:01:30 +13:00
ripplebiz
248c3107b4
Merge pull request #1605 from ViezeVingertjes/kiss-modem-spec-compliance
...
Kiss modem spec compliance
2026-02-09 16:45:20 +11:00
ripplebiz
f6fc05601c
Merge pull request #1609 from weebl2000/bridge-always-has-work
...
Bridge always has work (prevents sleep)
2026-02-08 22:42:05 +11:00
Liam Cottle
10eacc4e95
Merge pull request #1316 from weebl2000/allow-negative-tx
...
Allow negative tx
2026-02-08 12:43:10 +13:00
Wessel Nieboer
e8646f5ede
Parse as signed int
2026-02-07 16:58:06 +01:00
agessaman
776131e263
simplify kiss noise floor sampling
2026-02-07 07:42:52 -08:00
Wessel Nieboer
c4c287d01b
Bridge always has work (prevents sleep)
2026-02-07 15:39:24 +01:00
ViezeVingertjes
f6ebbd978e
Remove redundant locals in handleSetRadio
2026-02-07 14:32:11 +01:00
ViezeVingertjes
5157daf1c1
Remove individual HW_RESP_* defines, use HW_RESP() macro directly
2026-02-07 14:24:34 +01:00
ViezeVingertjes
00b44c4114
Remove redundant send/complete/finished callbacks, use Radio interface directly
2026-02-07 14:22:21 +01:00
ViezeVingertjes
5ccd99e25f
Add toggleable per-packet signal reporting
2026-02-07 10:21:36 +01:00
ViezeVingertjes
7982d1ce1f
Use high-bit convention for hardware response codes
2026-02-07 10:21:32 +01:00
ViezeVingertjes
49e7516145
Add KISS UART support
2026-02-07 08:51:52 +01:00
agessaman
f445b5acdc
fix(kiss_modem): improve RX delivery and noise floor sampling
2026-02-07 08:51:52 +01:00
ViezeVingertjes
02ddc05c30
Reorganise KISS protocol to close gaps.
2026-02-07 08:51:52 +01:00
ViezeVingertjes
f78617dbdb
Add periodic noise floor calibration and AGC reset
2026-02-07 08:51:52 +01:00
ViezeVingertjes
5dcc377b77
Rewrite KISS modem to be fully spec-compliant
2026-02-07 08:51:52 +01:00
ripplebiz
c1c9848569
Merge pull request #1596 from jbrazio/2026/t114-sensors
...
Refactor Heltec T114 sensor management
2026-02-07 14:17:15 +11:00
ripplebiz
6502067368
Merge pull request #1591 from agessaman/fix-kiss-noise-floor
...
fix(kiss): periodic noise floor calibration and AGC reset
2026-02-07 14:08:26 +11:00
Wessel Nieboer
d0720c63c2
Allow negative tx power
...
Like SX1262 allows -9 dBm lowest, some allow lower but that probably
isn't useful
2026-02-06 02:24:51 +01:00
Adam Gessaman
c0b81b9ad8
Clean up comments on kiss noise floor changes.
2026-02-05 09:46:30 -08:00
João Brázio
18473333df
Merge remote-tracking branch 'upstream/dev' into 2026/t114-sensors
2026-02-05 13:36:22 +00:00
João Brázio
5cb26b91f6
Refactor Heltec T114 sensor management
2026-02-05 13:35:04 +00:00
ripplebiz
76a46a74e9
Merge pull request #1562 from oltaco/nrf52-sleep-repeater
...
Add Low-Power Sleep for nRF52 Boards
2026-02-05 13:16:47 +11:00
ripplebiz
4b9d5462bb
Merge pull request #1532 from oltaco/esp32board.h-removewifi
...
Refactor ESP32Board.h to save ~500 bytes of DRAM
2026-02-05 13:09:04 +11:00
agessaman
0fb570338f
fix(kiss): periodic noise floor calibration and AGC reset
...
- Trigger noise floor calibration every 2s and AGC reset every 30s in main loop.
- Reorder loop to match Dispatcher: calibrate + radio.loop() before AGC reset
and recvRaw() so RSSI is never sampled right after startReceive().
- Update protocol doc with calibration intervals and typical noise floor range.
- Variant platformio.ini updates (heltec_v3, rak4631).
2026-02-03 20:58:39 -08:00
taco
598489be47
refactor ui with ring buffer and display most recent
2026-02-04 09:38:05 +11:00
ripplebiz
e03f311e51
Merge pull request #1545 from ViezeVingertjes/kiss-modem-firmware
...
Add KISS-like Modem example and protocol documentation
2026-02-03 12:33:19 +11:00
ViezeVingertjes
f0ba14ff75
Remove sync word handling from KissModem.
2026-02-02 18:05:26 +01:00
taco
a342ab8437
nrf52: allow repeater to sleep when idle
2026-02-01 14:51:27 +11:00
ViezeVingertjes
240b5ea1e3
Refactor KissModem to integrate radio and sensor management directly, removing callback dependencies.
2026-01-31 15:15:19 +01:00
ViezeVingertjes
1bcb52bab3
Add new commands and responses for RSSI, channel status, airtime, noise floor, statistics, battery, and sensors.
2026-01-31 15:05:25 +01:00
taco
8d5eaf500d
add makeBlobPath inline helper for esp32
2026-02-01 00:02:30 +11:00
taco
e6e1b810f8
add DataStore::deleteBlobByKey()
2026-02-01 00:02:29 +11:00
ViezeVingertjes
c786cfe613
Add KISS Modem firmware
2026-01-31 10:22:32 +01:00
