Commit Graph
384 Commits
Author SHA1 Message Date
Florent 74f1f5a156 Revert "Merge pull request #3784 from Maxwell456/feature/repeater-history"
This reverts commit f678f6ac15, reversing
changes made to b8ae75d258.
2026-11-11 07:49:41 -04:00
Valentin Metz 224658694f Fix stack-buffer overflow in CLI reply buffers
The remote-CLI reply buffers in onPeerDataRecv() (repeater, room server,
sensor) and BaseChatMesh were sized temp[166] for a 5-byte datagram
header plus 161 bytes of reply. But MyMesh::handleCommand() first
reflects a 3-byte correlation prefix (e.g. 'aa|') into the reply, after
which CommonCLI commands may write up to 160 chars + NUL into the
remaining 158 bytes -- overflowing the buffer by 2 bytes (e.g. a full
'regions' listing via exportTo(reply, 160)).

Triggering this remotely crashes the node (observed as an unresponsive
repeater after a prefixed 'regions' query); the 2 out-of-bounds bytes
are a printable region-name character and a NUL.

Size the buffers for the full worst case instead:
5 header + 3 prefix + 160 reply + 1 NUL = 169.

Verified with a host ASan harness reproducing the exact layout:
prefixed 'regions' with a 25-region listing overflowed temp[166]
(BufStream::write, RegionMap.cpp) and now passes clean with temp[169];
unprefixed (serial) path unaffected.
2026-11-11 05:30:54 +01:00
fdlamotte f678f6ac15 Merge pull request #3784 from Maxwell456/feature/repeater-history
Add min/max/avg history queries to repeaters
2026-11-10 12:42:53 -04:00
Maxwell 25c1867bbd Add min/max/avg history queries to repeaters
Move TimeSeriesData from simple_sensor into src/helpers and drive it with
monotonic uptime, so RTC changes cannot stall recording or break queries.
Keep the old RTCClock* overloads as deprecated for custom sensor sketches.

Record 24h of battery, noise floor, TX/RX airtime % and MCU temperature on
repeaters and answer the existing 0x04 min/max/avg request using the same
format as sensor nodes. No packets are sent by this feature.
REPEATER_HISTORY_SLOTS=0 removes it; default off on STM32/RP2040.

Add native tests for TimeSeriesData and document the request and channels.
2026-11-08 16:34:54 +02:00
Florent fe6a47d0c9 gps: move the gps CLI to GpsPrefs and convert all targets 2026-11-08 08:47:34 -04:00
Florent df5a768c5d gps: add GpsDriver, handle the hardware and software switches in the drivers 2026-11-08 08:47:34 -04:00
Blake LatchfordandClaude Opus 5.5 26e438904e Saturate duplicate packet stats instead of wrapping
Tested on a Heltec V4 repeater with the counter seeded at 65530.

Fixes #3255

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 21:45:10 -04:00
Scott Powell 07a833bbbe * version 1.18.0 2026-10-15 19:42:01 +11:00
Scott Powell f19733e478 * don't respond to DISCOVER requests if node has adverts turned off. (isHiddenNode()) 2026-10-04 15:02:00 +11:00
Wolfram Keil 61be70849a Add board loop hook for periodic work 2026-09-22 08:01:48 +02:00
Kevin Le c425648bfc Off LED before powering off for repeater 2026-09-19 11:26:42 +07:00
João Brázio 95214e8c40 Ensure command buffers stay NUL-terminated to prevent overflow
The serial command buffers must stay NUL-terminated within their
bounds: if they ever aren't, strlen() can return >= sizeof(command)
and the read loop would index past the buffer. Additionally, a full
buffer now becomes a completed line (end-of-line marker placed
inside the buffer, NUL terminator kept) instead of overwriting the
terminator and silently corrupting the buffer for the next pass.

Applies to the serial CLI readers of the repeater, room server,
sensor and secure chat examples, and to the CLI rescue reader of
the companion example.
2026-09-04 20:01:39 +01:00
Scott Powell 5a162ff4c6 * new DynamicConfigSerializer
* board/variant KeyValueStore now can write to 'custom' object in Json prefs
2026-08-24 17:12:56 +10:00
Scott Powell 47b0b7b3b8 * T096, and Station G3: refactoring the 'FEM' prefs to variant-specific code
* CommonCLI: 'FEM' commands removed
* introduced static no-op attachDynamicPrefs() for all boards
2026-08-24 01:50:22 +10:00
Scott Powell 2c0ace2519 * new TXT_TYPE_CLI_COMMAND (3) 2026-08-23 22:04:05 +10:00
ripplebiz e0031870f6 Merge pull request #3233 from entr0p1/fix/centralise-max-clients
Fix duplicate MAX_CLIENTS definition
2026-08-20 14:09:30 +10:00
Rastislav Vysoky 2db4b40617 repeater: set loop.detect to minimal as default for new installs 2026-08-18 14:56:58 +02:00
entr0p1 a8a6001576 Duplicate MAX_CLIENTS definition
MAX_CLIENTS is defined in both src/helpers/ClientACL.h and examples/simple_repeater/MyMesh.h. Appears it was centralised in the former header file some time ago. Both are included in some places and, depending on which order they're in, either value can win.

This change drops the duplicate entry from the repeater firmware and bumps the central limit up to 32 (per the original repeater firmware value).

Changes:
- Remove MAX_CLIENTS from repeater MyMesh.h
- Increase MAX_CLIENTS limit in ClientACL.h to 32
2026-08-17 23:01:52 +10:00
Scott Powell d929643524 * version 1.17.1 2026-08-14 22:19:19 +10:00
ripplebiz b09cb27a1f Merge pull request #3106 from ViezeVingertjes/fix/scoped-reply-routing
Fix replies dropped when flood.max.unscoped is low
2026-08-13 15:00:37 +10:00
ripplebiz a4ab7f0e59 Merge pull request #3137 from agessaman/feat/station-g3-fem-prefs
Station G3: Expose, persist, and apply FEM gain preferences
2026-08-12 16:11:23 +10:00
Scott Powell 93b2db63de * version 1.17.0 2026-08-09 15:14:46 +10:00
agessaman 23066573e5 fix(station-g3): expose FEM gain preferences 2026-08-06 15:29:14 -07:00
ripplebiz 84e3a67bd7 Merge pull request #3115 from oltaco/meshnology_w12
Add support for Meshnology W12 and LR2021 Wrapper
2026-08-05 15:04:00 +10:00
taco 9d4f93806d LR2021: auto-LDRO for side detectors 2026-08-05 14:23:32 +10:00
taco 696a82d7c2 LR2021 multi-SF support (side detectors) 2026-08-05 14:23:32 +10:00
ViezeVingertjes b155081882 Merge remote-tracking branch 'upstream/dev' into fix/scoped-reply-routing
# Conflicts:
#	examples/simple_repeater/MyMesh.cpp
2026-08-04 11:49:58 +02:00
ViezeVingertjes fad11c90f3 Fix replies dropped when flood.max.unscoped is low 2026-08-03 22:57:12 +02:00
Scott Powell 0fd11ed223 * bounds check added for anon_req reply_path_len 2026-08-04 01:00:31 +10:00
ripplebiz c86e63d2f5 Merge pull request #2982 from meshcore-dev/config-serializer
Config serializer
2026-07-27 17:58:03 +10:00
Scott Powell ee79df4c4f Merge branch 'dev' into config-serializer
# Conflicts:
#	test/mocks/Arduino.h
#	test/mocks/Stream.h
2026-07-24 15:06:48 +10:00
Scott Powell 56274db4ad * build fixes for old ESP32 boards 2026-07-22 19:52:23 +10:00
Scott Powell b8504e55c6 * refactor of Color mapping in UITasks / DisplayDrivers
* color displays now with a new light theme
2026-07-22 16:03:33 +10:00
Florent c644720ea7 uitask: screen and radio poweroff moved to board 2026-07-17 08:29:31 -04:00
fdlamotte 76c6e73fb6 Merge branch 'dev' into repeater_btn 2026-07-17 06:55:19 -04:00
Scott Powell 85285c6cbc Merge branch 'dev' into config-serializer 2026-07-16 17:22:28 +10:00
ripplebiz b55d69e57a Merge pull request #1983 from rgregg/rak-ethernet
Support for RAK ethernet module
2026-07-15 18:53:38 +10:00
Scott Powell 2af1e6d099 * first draft of new ConfigSerializer. (simple embedded JSON prefs) 2026-07-15 01:23:57 +10:00
Quency-D 4d0ba1516c Remove the watchdog feeding operation from each iteration of the loop to reduce power consumption. 2026-07-14 17:23:13 +08:00
Ryan Gregg 16b76bd35a Merge remote-tracking branch 'upstream/dev' into rak-ethernet
# Conflicts:
#	examples/companion_radio/main.cpp
2026-07-13 23:06:00 -07:00
Florent 2efb3af69b repeater: poweroff on long press 2026-07-06 08:40:56 -04:00
Quency-D 2867542cfa Merge branch 'dev' into solar-watchdog 2026-07-04 16:47:37 +08:00
Neil Alexander 0d7379520f Fix recv_pkt_region incorrect usage
The `recv_pkt_region` is set when processing a flood packet in `filterRecvFloodPacket`
but direct/non-flood packets would never pass through that function, so the pointer was
not cleared for them.

`sendFloodReply` would then later use it blindly, which meant that the response would
either inherit the region from the last flood packet, or refer to a non-initialised pointer
if no region floods had been received yet.
2026-07-02 09:28:41 +01:00
taco 1f9bb67400 return bool when setting rx boost 2026-06-26 07:44:01 +10:00
taco 5d0ff7fe6e remove guard on MyMesh::setRxBoostedGain() 2026-06-26 07:06:37 +10:00
Ryan Gregg a206f3e066 Merge remote-tracking branch 'upstream/dev' into rak-ethernet
# Conflicts:
#	docs/faq.md
#	examples/companion_radio/main.cpp
2026-06-20 14:39:03 -07:00
Wessel Nieboer 7c8e092457 Have CAD be a separate toggle (set cad on/off) 2026-06-14 15:20:58 +02:00
Wessel Nieboer 4f9a091671 Use hardware channel activity detection for checking interference 2026-06-14 15:19:18 +02:00
Quency-D 9100a58671 Merge branch 'dev' into cli-lna-command 2026-06-10 11:30:04 +08:00
Scott Powell 8c0d5c5b24 * version 1.16.0 2026-06-06 21:09:38 +10:00