ffbf73dc5c
Merge pull request #2432 from recrof/kiss-radio-everywhere
...
kiss radio: added stm32 support + envs in platformio.ini
2026-05-01 00:36:46 +12:00
5c651b35a0
Merge pull request #1954 from OverkillFPV/lora-longer-preamble
...
Lora longer preamble
2026-04-30 22:12:04 +12:00
696aae6ed1
Heltec boards have LNA disabled by default.
2026-04-29 16:20:21 +08:00
5beef490a0
add kiss radio env to most of the variants
2026-04-28 15:09:25 +02:00
66fe9ac2db
Fix FEM/LNA enbaled by default for Heltec T096, Heltec Wireless Tracker v2
...
Should only really be disabled when it causes issues.
2026-04-22 09:30:00 +02:00
958204c7f1
Merge branch 'dev' into lora-longer-preamble
2026-04-16 20:43:46 +10:00
f0ec5d2ae7
changed to set the preamble on radio settings change
2026-03-29 21:45:16 +11:00
274e00df50
Merge remote-tracking branch 'upstream/dev' into 2026/remote-lna
2026-03-16 09:37:55 +00:00
75895895f0
Add USE_SX1262 flag to multiple platformio.ini configurations
2026-03-16 09:34:12 +00:00
aad56bb334
Merge pull request #1936 from Quency-D/dev-heltec-tracker-v2
...
Update Heltec Tracker v2 to version KCT8103L.
2026-03-07 17:59:19 +13:00
7a8370fa69
Fixed a bug in the LORA_TX_POWER comment.
2026-03-06 16:04:47 +08:00
cdca79540f
Update Heltec Tracker v2 to version KCT8103L.
2026-03-06 14:19:07 +08:00
9a95e25ef2
Remove unused RX boosted gain mode functions and related preprocessor directives across multiple variants
2026-03-05 18:38:57 +00:00
8df87d5609
Merge remote-tracking branch 'upstream/dev' into 2026/remote-lna
2026-03-05 17:21:38 +00:00
67d22401b1
Pass rtc_clock to all MicroNMEALocationProvider instances
...
Enable GPS time synchronization across all variants by passing
&rtc_clock to MicroNMEALocationProvider. When GPS gets a valid
fix, the RTC clock is now updated automatically every 30 minutes.
Updated 16 variants: rak4631, lilygo_tbeam_SX1262, rak_wismesh_tag,
lilygo_tbeam_supreme_SX1262, thinknode_m3, heltec_v4, thinknode_m1,
lilygo_tbeam_SX1276, meshadventurer, nano_g2_ultra, heltec_v3,
promicro, xiao_c3, heltec_tracker_v2, keepteen_lt1, heltec_mesh_solar.
2026-03-03 15:45:07 +01:00
2bb6f636a4
Add 1ms delay after powering PA (cold-boot)
2026-02-28 19:05:31 +01:00
329e408197
Hold GC1109 PA_POWER during deep sleep for LNA RX wake
...
The GC1109 FEM needs its VFEM_Ctrl pin held HIGH during deep sleep
to keep the LNA active, enabling proper RX sensitivity for
wake-on-packet. Without this, the LNA is unpowered during sleep
and RX wake sensitivity is degraded by ~17dB.
Release RTC holds in begin() after configuring GPIO registers
(not before) to ensure glitch-free pin transitions on wake.
Trade-off: ~6.5mA additional sleep current for significantly
improved wake-on-packet range.
2026-02-28 19:05:31 +01:00
64a16d7ad2
Merge branch 'dev' into 2026/remote-lna
2026-02-27 10:32:14 +00:00
e33d93dc7f
Merge pull request #1611 from weebl2000/semtech-patch-tracker-v2
...
Enable register patch heltec tracker v2
2026-02-11 14:04:58 +11:00
71136671bd
Implement remote lna toggle cli cmd
2026-02-10 15:02:23 +00:00
23b4baa066
Enable register patch heltec tracker v2
2026-02-07 16:04:01 +01:00
d0720c63c2
Allow negative tx power
...
Like SX1262 allows -9 dBm lowest, some allow lower but that probably
isn't useful
2026-02-06 02:24:51 +01:00
a7a6bb51ce
Apply #1331 to other WiFi companions
2026-01-07 03:40:00 +01:00
04c0c40b39
set max contacts to 350 and channels to 40 for esp32c3, s3 and c6
2025-11-04 23:58:32 +01:00
70ac820594
add heltec tracker v2 board.
2025-10-11 18:01:26 +08:00
Liam Cottle