#include #include "target.h" #include HeltecV3Board board; #if defined(P_LORA_SCLK) static SPIClass spi; RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, spi); #else RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY); #endif WRAPPER_CLASS radio_driver(radio, board); ESP32RTCClock fallback_clock; AutoDiscoverRTCClock rtc_clock(fallback_clock); // GPS_EN (GPIO35) drives N-ch MOSFET → P-ch high-side switch; GPS_RESET (GPIO36) active LOW class HeltecTrackerGpsDriver : public NmeaGpsDriver { public: HeltecTrackerGpsDriver() : NmeaGpsDriver(Serial1, PIN_GPS_TX, PIN_GPS_RX, GPS_RESET, GPS_EN, &board.periph_power) {} void reset() override { NmeaGpsDriver::reset(); // Send configuration after reset if (isActive()) { delay(250); sendNmeaSentence("$CFGSYS,h35155*68"); // TODO: remove active wait (250ms is a lot) } } }; HeltecTrackerGpsDriver gps_driver; MicroNMEALocationProvider nmea(gps_driver, &rtc_clock); HWTSensorManager sensors = HWTSensorManager(nmea); #ifdef DISPLAY_CLASS DISPLAY_CLASS display(&board.periph_power); // peripheral power pin is shared MomentaryButton user_btn(PIN_USER_BTN, 1000, true); UITask ui_task(&board, &display); #endif bool radio_init() { fallback_clock.begin(); rtc_clock.begin(Wire); #if defined(P_LORA_SCLK) return radio.std_init(&spi); #else return radio.std_init(); #endif } mesh::LocalIdentity radio_new_identity() { RadioNoiseListener rng(radio); return mesh::LocalIdentity(&rng); // create new random identity } void HWTSensorManager::start_gps() { _location->setGpsOn(true); } void HWTSensorManager::stop_gps() { _location->setGpsOn(false); } bool HWTSensorManager::begin() { // the GPS UART (pins, baud rate) is now configured by gps_driver when the GPS is started return true; } bool HWTSensorManager::querySensors(uint8_t requester_permissions, CayenneLPP& telemetry) { if (requester_permissions & TELEM_PERM_LOCATION) { // does requester have permission? telemetry.addGPS(TELEM_CHANNEL_SELF, node_lat, node_lon, node_altitude); } return true; } void HWTSensorManager::loop() { static long next_gps_update = 0; _location->loop(); if (millis() > next_gps_update) { if (_location->isGpsOn() && _location->hasValidFix()) { node_lat = ((double)_location->getLatitude())/1000000.; node_lon = ((double)_location->getLongitude())/1000000.; node_altitude = ((double)_location->getAltitude()) / 1000.0; MESH_DEBUG_PRINTLN("lat %f lon %f", node_lat, node_lon); } next_gps_update = millis() + 1000; } } int HWTSensorManager::getNumSettings() const { return 1; } // just one supported: "gps" (power switch) const char* HWTSensorManager::getSettingName(int i) const { return i == 0 ? "gps" : NULL; } const char* HWTSensorManager::getSettingValue(int i) const { if (i == 0) { return _location->isGpsOn() ? "1" : "0"; } return NULL; } bool HWTSensorManager::setSettingValue(const char* name, const char* value) { if (strcmp(name, "gps") == 0) { if (strcmp(value, "0") == 0) { stop_gps(); } else { start_gps(); } return true; } return false; // not supported }