#include // needed for PlatformIO #include #if defined(NRF52_PLATFORM) #include #elif defined(ESP32) #include #endif #define RADIOLIB_STATIC_ONLY 1 #include #include #include #include #include #include #include #include /* ---------------------------------- CONFIGURATION ------------------------------------- */ #ifndef LORA_FREQ #define LORA_FREQ 915.0 #endif #ifndef LORA_BW #define LORA_BW 250 #endif #ifndef LORA_SF #define LORA_SF 10 #endif #ifndef LORA_CR #define LORA_CR 5 #endif #ifndef LORA_TX_POWER #define LORA_TX_POWER 20 #endif #ifndef MAX_LORA_TX_POWER #define MAX_LORA_TX_POWER LORA_TX_POWER #endif #ifndef MAX_CONTACTS #define MAX_CONTACTS 100 #endif #ifndef OFFLINE_QUEUE_SIZE #define OFFLINE_QUEUE_SIZE 16 #endif #include #define SEND_TIMEOUT_BASE_MILLIS 500 #define FLOOD_SEND_TIMEOUT_FACTOR 16.0f #define DIRECT_SEND_PERHOP_FACTOR 6.0f #define DIRECT_SEND_PERHOP_EXTRA_MILLIS 250 #define PUBLIC_GROUP_PSK "izOH6cXN6mrJ5e26oRXNcg==" #if defined(HELTEC_LORA_V3) #include #include static HeltecV3Board board; #elif defined(HELTEC_LORA_V2) #include #include static HeltecV2Board board; #elif defined(ARDUINO_XIAO_ESP32C3) #include #include #include static XiaoC3Board board; #elif defined(SEEED_XIAO_S3) || defined(LILYGO_T3S3) #include #include static ESP32Board board; #elif defined(LILYGO_TLORA) #include #include static LilyGoTLoraBoard board; #elif defined(RAK_4631) #include #include static RAK4631Board board; #elif defined(T1000_E) #include #include static T1000eBoard board; #elif defined(HELTEC_T114) #include #include static T114Board board; #elif defined(LILYGO_TECHO) #include #include static TechoBoard board; #else #error "need to provide a 'board' object" #endif #ifdef DISPLAY_CLASS #include static DISPLAY_CLASS display; #include "UITask.h" static UITask ui_task(display); #endif // Believe it or not, this std C function is busted on some platforms! static uint32_t _atoi(const char* sp) { uint32_t n = 0; while (*sp && *sp >= '0' && *sp <= '9') { n *= 10; n += (*sp++ - '0'); } return n; } /*------------ Frame Protocol --------------*/ #define FIRMWARE_VER_CODE 2 #ifndef FIRMWARE_BUILD_DATE #define FIRMWARE_BUILD_DATE "7 Mar 2025" #endif #ifndef FIRMWARE_VERSION #define FIRMWARE_VERSION "v1.2.1" #endif #define CMD_APP_START 1 #define CMD_SEND_TXT_MSG 2 #define CMD_SEND_CHANNEL_TXT_MSG 3 #define CMD_GET_CONTACTS 4 // with optional 'since' (for efficient sync) #define CMD_GET_DEVICE_TIME 5 #define CMD_SET_DEVICE_TIME 6 #define CMD_SEND_SELF_ADVERT 7 #define CMD_SET_ADVERT_NAME 8 #define CMD_ADD_UPDATE_CONTACT 9 #define CMD_SYNC_NEXT_MESSAGE 10 #define CMD_SET_RADIO_PARAMS 11 #define CMD_SET_RADIO_TX_POWER 12 #define CMD_RESET_PATH 13 #define CMD_SET_ADVERT_LATLON 14 #define CMD_REMOVE_CONTACT 15 #define CMD_SHARE_CONTACT 16 #define CMD_EXPORT_CONTACT 17 #define CMD_IMPORT_CONTACT 18 #define CMD_REBOOT 19 #define CMD_GET_BATTERY_VOLTAGE 20 #define CMD_SET_TUNING_PARAMS 21 #define CMD_DEVICE_QEURY 22 #define CMD_EXPORT_PRIVATE_KEY 23 #define CMD_IMPORT_PRIVATE_KEY 24 #define CMD_SEND_RAW_DATA 25 #define CMD_SEND_LOGIN 26 #define CMD_SEND_STATUS_REQ 27 #define CMD_HAS_CONNECTION 28 #define CMD_LOGOUT 29 // 'Disconnect' #define CMD_GET_CONTACT_BY_KEY 30 #define RESP_CODE_OK 0 #define RESP_CODE_ERR 1 #define RESP_CODE_CONTACTS_START 2 // first reply to CMD_GET_CONTACTS #define RESP_CODE_CONTACT 3 // multiple of these (after CMD_GET_CONTACTS) #define RESP_CODE_END_OF_CONTACTS 4 // last reply to CMD_GET_CONTACTS #define RESP_CODE_SELF_INFO 5 // reply to CMD_APP_START #define RESP_CODE_SENT 6 // reply to CMD_SEND_TXT_MSG #define RESP_CODE_CONTACT_MSG_RECV 7 // a reply to CMD_SYNC_NEXT_MESSAGE #define RESP_CODE_CHANNEL_MSG_RECV 8 // a reply to CMD_SYNC_NEXT_MESSAGE #define RESP_CODE_CURR_TIME 9 // a reply to CMD_GET_DEVICE_TIME #define RESP_CODE_NO_MORE_MESSAGES 10 // a reply to CMD_SYNC_NEXT_MESSAGE #define RESP_CODE_EXPORT_CONTACT 11 #define RESP_CODE_BATTERY_VOLTAGE 12 // a reply to a CMD_GET_BATTERY_VOLTAGE #define RESP_CODE_DEVICE_INFO 13 // a reply to CMD_DEVICE_QEURY #define RESP_CODE_PRIVATE_KEY 14 // a reply to CMD_EXPORT_PRIVATE_KEY #define RESP_CODE_DISABLED 15 // these are _pushed_ to client app at any time #define PUSH_CODE_ADVERT 0x80 #define PUSH_CODE_PATH_UPDATED 0x81 #define PUSH_CODE_SEND_CONFIRMED 0x82 #define PUSH_CODE_MSG_WAITING 0x83 #define PUSH_CODE_RAW_DATA 0x84 #define PUSH_CODE_LOGIN_SUCCESS 0x85 #define PUSH_CODE_LOGIN_FAIL 0x86 #define PUSH_CODE_STATUS_RESPONSE 0x87 /* -------------------------------------------------------------------------------------- */ struct NodePrefs { // persisted to file float airtime_factor; char node_name[32]; double node_lat, node_lon; float freq; uint8_t sf; uint8_t cr; uint8_t reserved1; uint8_t reserved2; float bw; uint8_t tx_power_dbm; uint8_t unused[3]; float rx_delay_base; uint32_t ble_pin; }; class MyMesh : public BaseChatMesh { FILESYSTEM* _fs; RADIO_CLASS* _phy; IdentityStore* _identity_store; NodePrefs _prefs; uint32_t expected_ack_crc; // TODO: keep table of expected ACKs uint32_t pending_login; uint32_t pending_status; mesh::GroupChannel* _public; BaseSerialInterface* _serial; unsigned long last_msg_sent; ContactsIterator _iter; uint32_t _iter_filter_since; uint32_t _most_recent_lastmod; uint32_t _active_ble_pin; bool _iter_started; uint8_t app_target_ver; uint8_t cmd_frame[MAX_FRAME_SIZE+1]; uint8_t out_frame[MAX_FRAME_SIZE+1]; struct Frame { uint8_t len; uint8_t buf[MAX_FRAME_SIZE]; }; int offline_queue_len; Frame offline_queue[OFFLINE_QUEUE_SIZE]; void loadMainIdentity(mesh::RNG& trng) { if (!_identity_store->load("_main", self_id)) { self_id = mesh::LocalIdentity(&trng); // create new random identity saveMainIdentity(self_id); } } bool saveMainIdentity(const mesh::LocalIdentity& identity) { return _identity_store->save("_main", identity); } void loadContacts() { if (_fs->exists("/contacts3")) { File file = _fs->open("/contacts3"); if (file) { bool full = false; while (!full) { ContactInfo c; uint8_t pub_key[32]; uint8_t unused; bool success = (file.read(pub_key, 32) == 32); success = success && (file.read((uint8_t *) &c.name, 32) == 32); success = success && (file.read(&c.type, 1) == 1); success = success && (file.read(&c.flags, 1) == 1); success = success && (file.read(&unused, 1) == 1); success = success && (file.read((uint8_t *) &c.sync_since, 4) == 4); // was 'reserved' success = success && (file.read((uint8_t *) &c.out_path_len, 1) == 1); success = success && (file.read((uint8_t *) &c.last_advert_timestamp, 4) == 4); success = success && (file.read(c.out_path, 64) == 64); success = success && (file.read((uint8_t *) &c.lastmod, 4) == 4); success = success && (file.read((uint8_t *) &c.gps_lat, 4) == 4); success = success && (file.read((uint8_t *) &c.gps_lon, 4) == 4); if (!success) break; // EOF c.id = mesh::Identity(pub_key); if (!addContact(c)) full = true; } file.close(); } } } void saveContacts() { #if defined(NRF52_PLATFORM) File file = _fs->open("/contacts3", FILE_O_WRITE); if (file) { file.seek(0); file.truncate(); } #else File file = _fs->open("/contacts3", "w", true); #endif if (file) { ContactsIterator iter; ContactInfo c; uint8_t unused = 0; while (iter.hasNext(this, c)) { bool success = (file.write(c.id.pub_key, 32) == 32); success = success && (file.write((uint8_t *) &c.name, 32) == 32); success = success && (file.write(&c.type, 1) == 1); success = success && (file.write(&c.flags, 1) == 1); success = success && (file.write(&unused, 1) == 1); success = success && (file.write((uint8_t *) &c.sync_since, 4) == 4); success = success && (file.write((uint8_t *) &c.out_path_len, 1) == 1); success = success && (file.write((uint8_t *) &c.last_advert_timestamp, 4) == 4); success = success && (file.write(c.out_path, 64) == 64); success = success && (file.write((uint8_t *) &c.lastmod, 4) == 4); success = success && (file.write((uint8_t *) &c.gps_lat, 4) == 4); success = success && (file.write((uint8_t *) &c.gps_lon, 4) == 4); if (!success) break; // write failed } file.close(); } } int getBlobByKey(const uint8_t key[], int key_len, uint8_t dest_buf[]) override { char path[64]; char fname[18]; if (key_len > 8) key_len = 8; // just use first 8 bytes (prefix) mesh::Utils::toHex(fname, key, key_len); sprintf(path, "/bl/%s", fname); if (_fs->exists(path)) { File f = _fs->open(path); if (f) { int len = f.read(dest_buf, 255); // currently MAX 255 byte blob len supported!! f.close(); return len; } } return 0; // not found } bool putBlobByKey(const uint8_t key[], int key_len, const uint8_t src_buf[], int len) override { char path[64]; char fname[18]; if (key_len > 8) key_len = 8; // just use first 8 bytes (prefix) mesh::Utils::toHex(fname, key, key_len); sprintf(path, "/bl/%s", fname); #if defined(NRF52_PLATFORM) File f = _fs->open(path, FILE_O_WRITE); if (f) { f.seek(0); f.truncate(); } #else File f = _fs->open(path, "w", true); #endif if (f) { int n = f.write(src_buf, len); f.close(); if (n == len) return true; // success! _fs->remove(path); // blob was only partially written! } return false; // error } void writeOKFrame() { uint8_t buf[1]; buf[0] = RESP_CODE_OK; _serial->writeFrame(buf, 1); } void writeErrFrame() { uint8_t buf[1]; buf[0] = RESP_CODE_ERR; _serial->writeFrame(buf, 1); } void writeDisabledFrame() { uint8_t buf[1]; buf[0] = RESP_CODE_DISABLED; _serial->writeFrame(buf, 1); } void writeContactRespFrame(uint8_t code, const ContactInfo& contact) { int i = 0; out_frame[i++] = code; memcpy(&out_frame[i], contact.id.pub_key, PUB_KEY_SIZE); i += PUB_KEY_SIZE; out_frame[i++] = contact.type; out_frame[i++] = contact.flags; out_frame[i++] = contact.out_path_len; memcpy(&out_frame[i], contact.out_path, MAX_PATH_SIZE); i += MAX_PATH_SIZE; StrHelper::strzcpy((char *) &out_frame[i], contact.name, 32); i += 32; memcpy(&out_frame[i], &contact.last_advert_timestamp, 4); i += 4; memcpy(&out_frame[i], &contact.gps_lat, 4); i += 4; memcpy(&out_frame[i], &contact.gps_lon, 4); i += 4; memcpy(&out_frame[i], &contact.lastmod, 4); i += 4; _serial->writeFrame(out_frame, i); } void updateContactFromFrame(ContactInfo& contact, const uint8_t* frame, int len) { int i = 0; uint8_t code = frame[i++]; // eg. CMD_ADD_UPDATE_CONTACT memcpy(contact.id.pub_key, &frame[i], PUB_KEY_SIZE); i += PUB_KEY_SIZE; contact.type = frame[i++]; contact.flags = frame[i++]; contact.out_path_len = frame[i++]; memcpy(contact.out_path, &frame[i], MAX_PATH_SIZE); i += MAX_PATH_SIZE; memcpy(contact.name, &frame[i], 32); i += 32; memcpy(&contact.last_advert_timestamp, &frame[i], 4); i += 4; if (i + 8 >= len) { // optional fields memcpy(&contact.gps_lat, &frame[i], 4); i += 4; memcpy(&contact.gps_lon, &frame[i], 4); i += 4; } } void addToOfflineQueue(const uint8_t frame[], int len) { if (offline_queue_len >= OFFLINE_QUEUE_SIZE) { MESH_DEBUG_PRINTLN("ERROR: offline_queue is full!"); } else { offline_queue[offline_queue_len].len = len; memcpy(offline_queue[offline_queue_len].buf, frame, len); offline_queue_len++; } } int getFromOfflineQueue(uint8_t frame[]) { if (offline_queue_len > 0) { // check offline queue size_t len = offline_queue[0].len; // take from top of queue memcpy(frame, offline_queue[0].buf, len); offline_queue_len--; for (int i = 0; i < offline_queue_len; i++) { // delete top item from queue offline_queue[i] = offline_queue[i + 1]; } return len; } return 0; // queue is empty } void soundBuzzer() { // TODO } protected: float getAirtimeBudgetFactor() const override { return _prefs.airtime_factor; } int calcRxDelay(float score, uint32_t air_time) const override { if (_prefs.rx_delay_base <= 0.0f) return 0; return (int) ((pow(_prefs.rx_delay_base, 0.85f - score) - 1.0) * air_time); } void onDiscoveredContact(ContactInfo& contact, bool is_new) override { if (_serial->isConnected()) { out_frame[0] = PUSH_CODE_ADVERT; memcpy(&out_frame[1], contact.id.pub_key, PUB_KEY_SIZE); _serial->writeFrame(out_frame, 1 + PUB_KEY_SIZE); } else { soundBuzzer(); } saveContacts(); } void onContactPathUpdated(const ContactInfo& contact) override { out_frame[0] = PUSH_CODE_PATH_UPDATED; memcpy(&out_frame[1], contact.id.pub_key, PUB_KEY_SIZE); _serial->writeFrame(out_frame, 1 + PUB_KEY_SIZE); // NOTE: app may not be connected saveContacts(); } bool processAck(const uint8_t *data) override { // TODO: see if matches any in a table if (memcmp(data, &expected_ack_crc, 4) == 0) { // got an ACK from recipient out_frame[0] = PUSH_CODE_SEND_CONFIRMED; memcpy(&out_frame[1], data, 4); uint32_t trip_time = _ms->getMillis() - last_msg_sent; memcpy(&out_frame[5], &trip_time, 4); _serial->writeFrame(out_frame, 9); // NOTE: the same ACK can be received multiple times! expected_ack_crc = 0; // reset our expected hash, now that we have received ACK return true; } return checkConnectionsAck(data); } void queueMessage(const ContactInfo& from, uint8_t txt_type, uint8_t path_len, uint32_t sender_timestamp, const uint8_t* extra, int extra_len, const char *text) { int i = 0; out_frame[i++] = RESP_CODE_CONTACT_MSG_RECV; memcpy(&out_frame[i], from.id.pub_key, 6); i += 6; // just 6-byte prefix out_frame[i++] = path_len; out_frame[i++] = txt_type; memcpy(&out_frame[i], &sender_timestamp, 4); i += 4; if (extra_len > 0) { memcpy(&out_frame[i], extra, extra_len); i += extra_len; } int tlen = strlen(text); // TODO: UTF-8 ?? if (i + tlen > MAX_FRAME_SIZE) { tlen = MAX_FRAME_SIZE - i; } memcpy(&out_frame[i], text, tlen); i += tlen; addToOfflineQueue(out_frame, i); if (_serial->isConnected()) { uint8_t frame[1]; frame[0] = PUSH_CODE_MSG_WAITING; // send push 'tickle' _serial->writeFrame(frame, 1); } else { soundBuzzer(); } #ifdef DISPLAY_CLASS ui_task.showMsgPreview(path_len, from.name, text); #endif } void onMessageRecv(const ContactInfo& from, uint8_t path_len, uint32_t sender_timestamp, const char *text) override { markConnectionActive(from); // in case this is from a server, and we have a connection queueMessage(from, TXT_TYPE_PLAIN, path_len, sender_timestamp, NULL, 0, text); } void onCommandDataRecv(const ContactInfo& from, uint8_t path_len, uint32_t sender_timestamp, const char *text) override { markConnectionActive(from); // in case this is from a server, and we have a connection queueMessage(from, TXT_TYPE_CLI_DATA, path_len, sender_timestamp, NULL, 0, text); } void onSignedMessageRecv(const ContactInfo& from, uint8_t path_len, uint32_t sender_timestamp, const uint8_t *sender_prefix, const char *text) override { markConnectionActive(from); saveContacts(); // from.sync_since change needs to be persisted queueMessage(from, TXT_TYPE_SIGNED_PLAIN, path_len, sender_timestamp, sender_prefix, 4, text); } void onChannelMessageRecv(const mesh::GroupChannel& channel, int in_path_len, uint32_t timestamp, const char *text) override { int i = 0; out_frame[i++] = RESP_CODE_CHANNEL_MSG_RECV; out_frame[i++] = 0; // FUTURE: channel_idx (will just be 'public' for now) out_frame[i++] = in_path_len < 0 ? 0xFF : in_path_len; out_frame[i++] = TXT_TYPE_PLAIN; memcpy(&out_frame[i], ×tamp, 4); i += 4; int tlen = strlen(text); // TODO: UTF-8 ?? if (i + tlen > MAX_FRAME_SIZE) { tlen = MAX_FRAME_SIZE - i; } memcpy(&out_frame[i], text, tlen); i += tlen; addToOfflineQueue(out_frame, i); if (_serial->isConnected()) { uint8_t frame[1]; frame[0] = PUSH_CODE_MSG_WAITING; // send push 'tickle' _serial->writeFrame(frame, 1); } else { soundBuzzer(); } #ifdef DISPLAY_CLASS ui_task.showMsgPreview(in_path_len < 0 ? 0xFF : in_path_len, "Public", text); #endif } void onContactResponse(const ContactInfo& contact, const uint8_t* data, uint8_t len) override { uint32_t sender_timestamp; memcpy(&sender_timestamp, data, 4); if (pending_login && memcmp(&pending_login, contact.id.pub_key, 4) == 0) { // check for login response // yes, is response to pending sendLogin() pending_login = 0; int i = 0; if (memcmp(&data[4], "OK", 2) == 0) { // legacy Repeater login OK response out_frame[i++] = PUSH_CODE_LOGIN_SUCCESS; out_frame[i++] = 0; // legacy: is_admin = false } else if (data[4] == RESP_SERVER_LOGIN_OK) { // new login response uint16_t keep_alive_secs = ((uint16_t)data[5]) * 16; if (keep_alive_secs > 0) { startConnection(contact, keep_alive_secs); } out_frame[i++] = PUSH_CODE_LOGIN_SUCCESS; out_frame[i++] = data[6]; // permissions (eg. is_admin) } else { out_frame[i++] = PUSH_CODE_LOGIN_FAIL; out_frame[i++] = 0; // reserved } memcpy(&out_frame[i], contact.id.pub_key, 6); i += 6; // pub_key_prefix _serial->writeFrame(out_frame, i); } else if (len > 4 && pending_status && memcmp(&pending_status, contact.id.pub_key, 4) == 0) { // check for status response // yes, is response to pending sendStatusRequest() pending_status = 0; int i = 0; out_frame[i++] = PUSH_CODE_STATUS_RESPONSE; out_frame[i++] = 0; // reserved memcpy(&out_frame[i], contact.id.pub_key, 6); i += 6; // pub_key_prefix memcpy(&out_frame[i], &data[4], len - 4); i += (len - 4); _serial->writeFrame(out_frame, i); } } void onRawDataRecv(mesh::Packet* packet) override { int i = 0; out_frame[i++] = PUSH_CODE_RAW_DATA; out_frame[i++] = (int8_t)(_radio->getLastSNR() * 4); out_frame[i++] = (int8_t)(_radio->getLastRSSI()); out_frame[i++] = 0xFF; // reserved (possibly path_len in future) memcpy(&out_frame[i], packet->payload, packet->payload_len); i += packet->payload_len; if (_serial->isConnected()) { _serial->writeFrame(out_frame, i); } else { MESH_DEBUG_PRINTLN("onRawDataRecv(), data received while app offline"); } } uint32_t calcFloodTimeoutMillisFor(uint32_t pkt_airtime_millis) const override { return SEND_TIMEOUT_BASE_MILLIS + (FLOOD_SEND_TIMEOUT_FACTOR * pkt_airtime_millis); } uint32_t calcDirectTimeoutMillisFor(uint32_t pkt_airtime_millis, uint8_t path_len) const override { return SEND_TIMEOUT_BASE_MILLIS + ( (pkt_airtime_millis*DIRECT_SEND_PERHOP_FACTOR + DIRECT_SEND_PERHOP_EXTRA_MILLIS) * (path_len + 1)); } void onSendTimeout() override { } public: MyMesh(RADIO_CLASS& phy, RadioLibWrapper& rw, mesh::RNG& rng, mesh::RTCClock& rtc, SimpleMeshTables& tables) : BaseChatMesh(rw, *new ArduinoMillis(), rng, rtc, *new StaticPoolPacketManager(16), tables), _serial(NULL), _phy(&phy) { _iter_started = false; offline_queue_len = 0; app_target_ver = 0; _identity_store = NULL; pending_login = pending_status = 0; // defaults memset(&_prefs, 0, sizeof(_prefs)); _prefs.airtime_factor = 1.0; // one half strcpy(_prefs.node_name, "NONAME"); _prefs.freq = LORA_FREQ; _prefs.sf = LORA_SF; _prefs.bw = LORA_BW; _prefs.cr = LORA_CR; _prefs.tx_power_dbm = LORA_TX_POWER; //_prefs.rx_delay_base = 10.0f; enable once new algo fixed } void begin(FILESYSTEM& fs, mesh::RNG& trng) { _fs = &fs; BaseChatMesh::begin(); #if defined(NRF52_PLATFORM) _identity_store = new IdentityStore(fs, ""); #else _identity_store = new IdentityStore(fs, "/identity"); #endif loadMainIdentity(trng); // load persisted prefs if (_fs->exists("/node_prefs")) { File file = _fs->open("/node_prefs"); if (file) { uint8_t pad[8]; file.read((uint8_t *) &_prefs.airtime_factor, sizeof(float)); // 0 file.read((uint8_t *) _prefs.node_name, sizeof(_prefs.node_name)); // 4 file.read(pad, 4); // 36 file.read((uint8_t *) &_prefs.node_lat, sizeof(_prefs.node_lat)); // 40 file.read((uint8_t *) &_prefs.node_lon, sizeof(_prefs.node_lon)); // 48 file.read((uint8_t *) &_prefs.freq, sizeof(_prefs.freq)); // 56 file.read((uint8_t *) &_prefs.sf, sizeof(_prefs.sf)); // 60 file.read((uint8_t *) &_prefs.cr, sizeof(_prefs.cr)); // 61 file.read((uint8_t *) &_prefs.reserved1, sizeof(_prefs.reserved1)); // 62 file.read((uint8_t *) &_prefs.reserved2, sizeof(_prefs.reserved2)); // 63 file.read((uint8_t *) &_prefs.bw, sizeof(_prefs.bw)); // 64 file.read((uint8_t *) &_prefs.tx_power_dbm, sizeof(_prefs.tx_power_dbm)); // 68 file.read((uint8_t *) _prefs.unused, sizeof(_prefs.unused)); // 69 file.read((uint8_t *) &_prefs.rx_delay_base, sizeof(_prefs.rx_delay_base)); // 72 file.read(pad, 4); // 76 file.read((uint8_t *) &_prefs.ble_pin, sizeof(_prefs.ble_pin)); // 80 // sanitise bad pref values _prefs.rx_delay_base = constrain(_prefs.rx_delay_base, 0, 20.0f); _prefs.airtime_factor = constrain(_prefs.airtime_factor, 0, 9.0f); _prefs.freq = constrain(_prefs.freq, 400.0f, 2500.0f); _prefs.bw = constrain(_prefs.bw, 62.5f, 500.0f); _prefs.sf = constrain(_prefs.sf, 7, 12); _prefs.cr = constrain(_prefs.cr, 5, 8); _prefs.tx_power_dbm = constrain(_prefs.tx_power_dbm, 1, MAX_LORA_TX_POWER); file.close(); } } #ifdef BLE_PIN_CODE if (_prefs.ble_pin == 0) { #ifdef DISPLAY_CLASS _active_ble_pin = trng.nextInt(100000, 999999); // random pin each session #else _active_ble_pin = BLE_PIN_CODE; // otherwise static pin #endif } else { _active_ble_pin = _prefs.ble_pin; } #else _active_ble_pin = 0; #endif // init 'blob store' support _fs->mkdir("/bl"); loadContacts(); _public = addChannel(PUBLIC_GROUP_PSK); // pre-configure Andy's public channel _phy->setFrequency(_prefs.freq); _phy->setSpreadingFactor(_prefs.sf); _phy->setBandwidth(_prefs.bw); _phy->setCodingRate(_prefs.cr); _phy->setOutputPower(_prefs.tx_power_dbm); } const char* getNodeName() { return _prefs.node_name; } uint32_t getBLEPin() { return _active_ble_pin; } void startInterface(BaseSerialInterface& serial) { _serial = &serial; serial.enable(); } void savePrefs() { #if defined(NRF52_PLATFORM) File file = _fs->open("/node_prefs", FILE_O_WRITE); if (file) { file.seek(0); file.truncate(); } #else File file = _fs->open("/node_prefs", "w", true); #endif if (file) { uint8_t pad[8]; memset(pad, 0, sizeof(pad)); file.write((uint8_t *) &_prefs.airtime_factor, sizeof(float)); // 0 file.write((uint8_t *) _prefs.node_name, sizeof(_prefs.node_name)); // 4 file.write(pad, 4); // 36 file.write((uint8_t *) &_prefs.node_lat, sizeof(_prefs.node_lat)); // 40 file.write((uint8_t *) &_prefs.node_lon, sizeof(_prefs.node_lon)); // 48 file.write((uint8_t *) &_prefs.freq, sizeof(_prefs.freq)); // 56 file.write((uint8_t *) &_prefs.sf, sizeof(_prefs.sf)); // 60 file.write((uint8_t *) &_prefs.cr, sizeof(_prefs.cr)); // 61 file.write((uint8_t *) &_prefs.reserved1, sizeof(_prefs.reserved1)); // 62 file.write((uint8_t *) &_prefs.reserved2, sizeof(_prefs.reserved2)); // 63 file.write((uint8_t *) &_prefs.bw, sizeof(_prefs.bw)); // 64 file.write((uint8_t *) &_prefs.tx_power_dbm, sizeof(_prefs.tx_power_dbm)); // 68 file.write((uint8_t *) _prefs.unused, sizeof(_prefs.unused)); // 69 file.write((uint8_t *) &_prefs.rx_delay_base, sizeof(_prefs.rx_delay_base)); // 72 file.write(pad, 4); // 76 file.write((uint8_t *) &_prefs.ble_pin, sizeof(_prefs.ble_pin)); // 80 file.close(); } } void handleCmdFrame(size_t len) { if (cmd_frame[0] == CMD_DEVICE_QEURY && len >= 2) { // sent when app establishes connection app_target_ver = cmd_frame[1]; // which version of protocol does app understand int i = 0; out_frame[i++] = RESP_CODE_DEVICE_INFO; out_frame[i++] = FIRMWARE_VER_CODE; memset(&out_frame[i], 0, 6); i += 6; // reserved memset(&out_frame[i], 0, 12); strcpy((char *) &out_frame[i], FIRMWARE_BUILD_DATE); i += 12; StrHelper::strzcpy((char *) &out_frame[i], board.getManufacturerName(), 40); i += 40; StrHelper::strzcpy((char *) &out_frame[i], FIRMWARE_VERSION, 20); i += 20; _serial->writeFrame(out_frame, i); } else if (cmd_frame[0] == CMD_APP_START && len >= 8) { // sent when app establishes connection, respond with node ID // cmd_frame[1..7] reserved future char* app_name = (char *) &cmd_frame[8]; cmd_frame[len] = 0; // make app_name null terminated MESH_DEBUG_PRINTLN("App %s connected", app_name); _iter_started = false; // stop any left-over ContactsIterator int i = 0; out_frame[i++] = RESP_CODE_SELF_INFO; out_frame[i++] = ADV_TYPE_CHAT; // what this node Advert identifies as (maybe node's pronouns too?? :-) out_frame[i++] = _prefs.tx_power_dbm; out_frame[i++] = MAX_LORA_TX_POWER; memcpy(&out_frame[i], self_id.pub_key, PUB_KEY_SIZE); i += PUB_KEY_SIZE; int32_t lat, lon, alt = 0; lat = (_prefs.node_lat * 1000000.0); lon = (_prefs.node_lon * 1000000.0); memcpy(&out_frame[i], &lat, 4); i += 4; memcpy(&out_frame[i], &lon, 4); i += 4; memcpy(&out_frame[i], &alt, 4); i += 4; uint32_t freq = _prefs.freq * 1000; memcpy(&out_frame[i], &freq, 4); i += 4; uint32_t bw = _prefs.bw*1000; memcpy(&out_frame[i], &bw, 4); i += 4; out_frame[i++] = _prefs.sf; out_frame[i++] = _prefs.cr; int tlen = strlen(_prefs.node_name); // revisit: UTF_8 ?? memcpy(&out_frame[i], _prefs.node_name, tlen); i += tlen; _serial->writeFrame(out_frame, i); } else if (cmd_frame[0] == CMD_SEND_TXT_MSG && len >= 14) { int i = 1; uint8_t txt_type = cmd_frame[i++]; uint8_t attempt = cmd_frame[i++]; uint32_t msg_timestamp; memcpy(&msg_timestamp, &cmd_frame[i], 4); i += 4; uint8_t* pub_key_prefix = &cmd_frame[i]; i += 6; ContactInfo* recipient = lookupContactByPubKey(pub_key_prefix, 6); if (recipient && attempt < 4 && (txt_type == TXT_TYPE_PLAIN || txt_type == TXT_TYPE_CLI_DATA)) { char *text = (char *) &cmd_frame[i]; int tlen = len - i; uint32_t est_timeout; text[tlen] = 0; // ensure null int result; if (txt_type == TXT_TYPE_CLI_DATA) { result = sendCommandData(*recipient, msg_timestamp, attempt, text, est_timeout); expected_ack_crc = 0; // no Ack expected } else { result = sendMessage(*recipient, msg_timestamp, attempt, text, expected_ack_crc, est_timeout); } // TODO: add expected ACK to table if (result == MSG_SEND_FAILED) { writeErrFrame(); } else { last_msg_sent = _ms->getMillis(); out_frame[0] = RESP_CODE_SENT; out_frame[1] = (result == MSG_SEND_SENT_FLOOD) ? 1 : 0; memcpy(&out_frame[2], &expected_ack_crc, 4); memcpy(&out_frame[6], &est_timeout, 4); _serial->writeFrame(out_frame, 10); } } else { writeErrFrame(); // unknown recipient, or unsuported TXT_TYPE_* } } else if (cmd_frame[0] == CMD_SEND_CHANNEL_TXT_MSG) { // send GroupChannel msg int i = 1; uint8_t txt_type = cmd_frame[i++]; // should be TXT_TYPE_PLAIN uint8_t channel_idx = cmd_frame[i++]; // reserved future uint32_t msg_timestamp; memcpy(&msg_timestamp, &cmd_frame[i], 4); i += 4; const char *text = (char *) &cmd_frame[i]; if (txt_type == TXT_TYPE_PLAIN && sendGroupMessage(msg_timestamp, *_public, _prefs.node_name, text, len - i)) { // hard-coded to 'public' channel for now writeOKFrame(); } else { writeErrFrame(); } } else if (cmd_frame[0] == CMD_GET_CONTACTS) { // get Contact list if (_iter_started) { writeErrFrame(); // iterator is currently busy } else { if (len >= 5) { // has optional 'since' param memcpy(&_iter_filter_since, &cmd_frame[1], 4); } else { _iter_filter_since = 0; } uint8_t reply[5]; reply[0] = RESP_CODE_CONTACTS_START; uint32_t count = getNumContacts(); // total, NOT filtered count memcpy(&reply[1], &count, 4); _serial->writeFrame(reply, 5); // start iterator _iter = startContactsIterator(); _iter_started = true; _most_recent_lastmod = 0; } } else if (cmd_frame[0] == CMD_SET_ADVERT_NAME && len >= 2) { int nlen = len - 1; if (nlen > sizeof(_prefs.node_name)-1) nlen = sizeof(_prefs.node_name)-1; // max len memcpy(_prefs.node_name, &cmd_frame[1], nlen); _prefs.node_name[nlen] = 0; // null terminator savePrefs(); writeOKFrame(); } else if (cmd_frame[0] == CMD_SET_ADVERT_LATLON && len >= 9) { int32_t lat, lon, alt = 0; memcpy(&lat, &cmd_frame[1], 4); memcpy(&lon, &cmd_frame[5], 4); if (len >= 13) { memcpy(&alt, &cmd_frame[9], 4); // for FUTURE support } if (lat <= 90*1E6 && lat >= -90*1E6 && lon <= 180*1E6 && lon >= -180*1E6) { _prefs.node_lat = ((double)lat) / 1000000.0; _prefs.node_lon = ((double)lon) / 1000000.0; savePrefs(); writeOKFrame(); } else { writeErrFrame(); // invalid geo coordinate } } else if (cmd_frame[0] == CMD_GET_DEVICE_TIME) { uint8_t reply[5]; reply[0] = RESP_CODE_CURR_TIME; uint32_t now = getRTCClock()->getCurrentTime(); memcpy(&reply[1], &now, 4); _serial->writeFrame(reply, 5); } else if (cmd_frame[0] == CMD_SET_DEVICE_TIME && len >= 5) { uint32_t secs; memcpy(&secs, &cmd_frame[1], 4); uint32_t curr = getRTCClock()->getCurrentTime(); if (secs >= curr) { getRTCClock()->setCurrentTime(secs); writeOKFrame(); } else { writeErrFrame(); } } else if (cmd_frame[0] == CMD_SEND_SELF_ADVERT) { auto pkt = createSelfAdvert(_prefs.node_name, _prefs.node_lat, _prefs.node_lon); if (pkt) { if (len >= 2 && cmd_frame[1] == 1) { // optional param (1 = flood, 0 = zero hop) sendFlood(pkt); } else { sendZeroHop(pkt); } writeOKFrame(); } else { writeErrFrame(); } } else if (cmd_frame[0] == CMD_RESET_PATH && len >= 1+32) { uint8_t* pub_key = &cmd_frame[1]; ContactInfo* recipient = lookupContactByPubKey(pub_key, PUB_KEY_SIZE); if (recipient) { recipient->out_path_len = -1; //recipient->lastmod = ?? shouldn't be needed, app already has this version of contact saveContacts(); writeOKFrame(); } else { writeErrFrame(); // unknown contact } } else if (cmd_frame[0] == CMD_ADD_UPDATE_CONTACT && len >= 1+32+2+1) { uint8_t* pub_key = &cmd_frame[1]; ContactInfo* recipient = lookupContactByPubKey(pub_key, PUB_KEY_SIZE); if (recipient) { updateContactFromFrame(*recipient, cmd_frame, len); //recipient->lastmod = ?? shouldn't be needed, app already has this version of contact saveContacts(); writeOKFrame(); } else { ContactInfo contact; updateContactFromFrame(contact, cmd_frame, len); contact.lastmod = getRTCClock()->getCurrentTime(); contact.sync_since = 0; if (addContact(contact)) { saveContacts(); writeOKFrame(); } else { writeErrFrame(); // table is full! } } } else if (cmd_frame[0] == CMD_REMOVE_CONTACT) { uint8_t* pub_key = &cmd_frame[1]; ContactInfo* recipient = lookupContactByPubKey(pub_key, PUB_KEY_SIZE); if (recipient && removeContact(*recipient)) { saveContacts(); writeOKFrame(); } else { writeErrFrame(); // not found, or unable to remove } } else if (cmd_frame[0] == CMD_SHARE_CONTACT) { uint8_t* pub_key = &cmd_frame[1]; ContactInfo* recipient = lookupContactByPubKey(pub_key, PUB_KEY_SIZE); if (recipient && shareContactZeroHop(*recipient)) { writeOKFrame(); } else { writeErrFrame(); // not found, or unable to send } } else if (cmd_frame[0] == CMD_GET_CONTACT_BY_KEY) { uint8_t* pub_key = &cmd_frame[1]; ContactInfo* contact = lookupContactByPubKey(pub_key, PUB_KEY_SIZE); if (contact) { writeContactRespFrame(RESP_CODE_CONTACT, *contact); } else { writeErrFrame(); // not found } } else if (cmd_frame[0] == CMD_EXPORT_CONTACT) { if (len < 1 + PUB_KEY_SIZE) { // export SELF auto pkt = createSelfAdvert(_prefs.node_name, _prefs.node_lat, _prefs.node_lon); if (pkt) { out_frame[0] = RESP_CODE_EXPORT_CONTACT; uint8_t out_len = pkt->writeTo(&out_frame[1]); releasePacket(pkt); // undo the obtainNewPacket() _serial->writeFrame(out_frame, out_len + 1); } else { writeErrFrame(); // Error } } else { uint8_t* pub_key = &cmd_frame[1]; ContactInfo* recipient = lookupContactByPubKey(pub_key, PUB_KEY_SIZE); uint8_t out_len; if (recipient && (out_len = exportContact(*recipient, &out_frame[1])) > 0) { out_frame[0] = RESP_CODE_EXPORT_CONTACT; _serial->writeFrame(out_frame, out_len + 1); } else { writeErrFrame(); // not found } } } else if (cmd_frame[0] == CMD_IMPORT_CONTACT && len > 2+32+64) { if (importContact(&cmd_frame[1], len - 1)) { writeOKFrame(); } else { writeErrFrame(); } } else if (cmd_frame[0] == CMD_SYNC_NEXT_MESSAGE) { int out_len; if ((out_len = getFromOfflineQueue(out_frame)) > 0) { _serial->writeFrame(out_frame, out_len); } else { out_frame[0] = RESP_CODE_NO_MORE_MESSAGES; _serial->writeFrame(out_frame, 1); } } else if (cmd_frame[0] == CMD_SET_RADIO_PARAMS) { int i = 1; uint32_t freq; memcpy(&freq, &cmd_frame[i], 4); i += 4; uint32_t bw; memcpy(&bw, &cmd_frame[i], 4); i += 4; uint8_t sf = cmd_frame[i++]; uint8_t cr = cmd_frame[i++]; if (freq >= 300000 && freq <= 2500000 && sf >= 7 && sf <= 12 && cr >= 5 && cr <= 8 && bw >= 7000 && bw <= 500000) { _prefs.sf = sf; _prefs.cr = cr; _prefs.freq = (float)freq / 1000.0; _prefs.bw = (float)bw / 1000.0; savePrefs(); _phy->setFrequency(_prefs.freq); _phy->setSpreadingFactor(_prefs.sf); _phy->setBandwidth(_prefs.bw); _phy->setCodingRate(_prefs.cr); MESH_DEBUG_PRINTLN("OK: CMD_SET_RADIO_PARAMS: f=%d, bw=%d, sf=%d, cr=%d", freq, bw, (uint32_t)sf, (uint32_t)cr); writeOKFrame(); } else { MESH_DEBUG_PRINTLN("Error: CMD_SET_RADIO_PARAMS: f=%d, bw=%d, sf=%d, cr=%d", freq, bw, (uint32_t)sf, (uint32_t)cr); writeErrFrame(); } } else if (cmd_frame[0] == CMD_SET_RADIO_TX_POWER) { if (cmd_frame[1] > MAX_LORA_TX_POWER) { writeErrFrame(); } else { _prefs.tx_power_dbm = cmd_frame[1]; savePrefs(); _phy->setOutputPower(_prefs.tx_power_dbm); writeOKFrame(); } } else if (cmd_frame[0] == CMD_SET_TUNING_PARAMS) { int i = 1; uint32_t rx, af; memcpy(&rx, &cmd_frame[i], 4); i += 4; memcpy(&af, &cmd_frame[i], 4); i += 4; _prefs.rx_delay_base = ((float)rx) / 1000.0f; _prefs.airtime_factor = ((float)af) / 1000.0f; savePrefs(); writeOKFrame(); } else if (cmd_frame[0] == CMD_REBOOT && memcmp(&cmd_frame[1], "reboot", 6) == 0) { board.reboot(); } else if (cmd_frame[0] == CMD_GET_BATTERY_VOLTAGE) { uint8_t reply[3]; reply[0] = RESP_CODE_BATTERY_VOLTAGE; uint16_t battery_millivolts = board.getBattMilliVolts(); memcpy(&reply[1], &battery_millivolts, 2); _serial->writeFrame(reply, 3); } else if (cmd_frame[0] == CMD_EXPORT_PRIVATE_KEY) { #if ENABLE_PRIVATE_KEY_EXPORT uint8_t reply[65]; reply[0] = RESP_CODE_PRIVATE_KEY; self_id.writeTo(&reply[1], 64); _serial->writeFrame(reply, 65); #else writeDisabledFrame(); #endif } else if (cmd_frame[0] == CMD_IMPORT_PRIVATE_KEY && len >= 65) { #if ENABLE_PRIVATE_KEY_IMPORT mesh::LocalIdentity identity; identity.readFrom(&cmd_frame[1], 64); if (saveMainIdentity(identity)) { self_id = identity; writeOKFrame(); } else { writeErrFrame(); } #else writeDisabledFrame(); #endif } else if (cmd_frame[0] == CMD_SEND_RAW_DATA && len >= 6) { int i = 1; int8_t path_len = cmd_frame[i++]; if (path_len >= 0 && i + path_len + 4 <= len) { // minimum 4 byte payload uint8_t* path = &cmd_frame[i]; i += path_len; auto pkt = createRawData(&cmd_frame[i], len - i); if (pkt) { sendDirect(pkt, path, path_len); writeOKFrame(); } else { writeErrFrame(); } } else { writeErrFrame(); // flood, not supported (yet) } } else if (cmd_frame[0] == CMD_SEND_LOGIN && len >= 1+PUB_KEY_SIZE) { uint8_t* pub_key = &cmd_frame[1]; ContactInfo* recipient = lookupContactByPubKey(pub_key, PUB_KEY_SIZE); char *password = (char *) &cmd_frame[1+PUB_KEY_SIZE]; cmd_frame[len] = 0; // ensure null terminator in password if (recipient) { uint32_t est_timeout; int result = sendLogin(*recipient, password, est_timeout); if (result == MSG_SEND_FAILED) { writeErrFrame(); } else { pending_status = 0; memcpy(&pending_login, recipient->id.pub_key, 4); // match this to onContactResponse() out_frame[0] = RESP_CODE_SENT; out_frame[1] = (result == MSG_SEND_SENT_FLOOD) ? 1 : 0; memcpy(&out_frame[2], &pending_login, 4); memcpy(&out_frame[6], &est_timeout, 4); _serial->writeFrame(out_frame, 10); } } else { writeErrFrame(); // contact not found } } else if (cmd_frame[0] == CMD_SEND_STATUS_REQ && len >= 1+PUB_KEY_SIZE) { uint8_t* pub_key = &cmd_frame[1]; ContactInfo* recipient = lookupContactByPubKey(pub_key, PUB_KEY_SIZE); if (recipient) { uint32_t est_timeout; int result = sendStatusRequest(*recipient, est_timeout); if (result == MSG_SEND_FAILED) { writeErrFrame(); } else { pending_login = 0; memcpy(&pending_status, recipient->id.pub_key, 4); // match this to onContactResponse() out_frame[0] = RESP_CODE_SENT; out_frame[1] = (result == MSG_SEND_SENT_FLOOD) ? 1 : 0; memcpy(&out_frame[2], &pending_status, 4); memcpy(&out_frame[6], &est_timeout, 4); _serial->writeFrame(out_frame, 10); } } else { writeErrFrame(); // contact not found } } else if (cmd_frame[0] == CMD_HAS_CONNECTION && len >= 1+PUB_KEY_SIZE) { uint8_t* pub_key = &cmd_frame[1]; if (hasConnectionTo(pub_key)) { writeOKFrame(); } else { writeErrFrame(); } } else if (cmd_frame[0] == CMD_LOGOUT && len >= 1+PUB_KEY_SIZE) { uint8_t* pub_key = &cmd_frame[1]; stopConnection(pub_key); writeOKFrame(); } else { writeErrFrame(); MESH_DEBUG_PRINTLN("ERROR: unknown command: %02X", cmd_frame[0]); } } void loop() { BaseChatMesh::loop(); size_t len = _serial->checkRecvFrame(cmd_frame); if (len > 0) { handleCmdFrame(len); } else if (_iter_started // check if our ContactsIterator is 'running' && !_serial->isWriteBusy() // don't spam the Serial Interface too quickly! ) { ContactInfo contact; if (_iter.hasNext(this, contact)) { if (contact.lastmod > _iter_filter_since) { // apply the 'since' filter writeContactRespFrame(RESP_CODE_CONTACT, contact); if (contact.lastmod > _most_recent_lastmod) { _most_recent_lastmod = contact.lastmod; // save for the RESP_CODE_END_OF_CONTACTS frame } } } else { // EOF out_frame[0] = RESP_CODE_END_OF_CONTACTS; memcpy(&out_frame[1], &_most_recent_lastmod, 4); // include the most recent lastmod, so app can update their 'since' _serial->writeFrame(out_frame, 5); _iter_started = false; } } else if (!_serial->isWriteBusy()) { checkConnections(); } #ifdef DISPLAY_CLASS ui_task.setHasConnection(_serial->isConnected()); ui_task.loop(); #endif } }; #ifdef ESP32 #ifdef WIFI_SSID #include SerialWifiInterface serial_interface; #ifndef TCP_PORT #define TCP_PORT 5000 #endif #elif defined(BLE_PIN_CODE) #include SerialBLEInterface serial_interface; #else #include ArduinoSerialInterface serial_interface; #endif #elif defined(NRF52_PLATFORM) #ifdef BLE_PIN_CODE #include SerialBLEInterface serial_interface; #else #include ArduinoSerialInterface serial_interface; #endif #else #error "need to define a serial interface" #endif #if defined(NRF52_PLATFORM) RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, SPI); #elif defined(LILYGO_TLORA) SPIClass spi; RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_0, P_LORA_RESET, P_LORA_DIO_1, spi); #elif defined(P_LORA_SCLK) SPIClass spi; RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, spi); #else RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY); #endif StdRNG fast_rng; SimpleMeshTables tables; MyMesh the_mesh(radio, *new WRAPPER_CLASS(radio, board), fast_rng, *new VolatileRTCClock(), tables); void halt() { while (1) ; } void setup() { Serial.begin(115200); board.begin(); #ifdef SX126X_DIO3_TCXO_VOLTAGE float tcxo = SX126X_DIO3_TCXO_VOLTAGE; #else float tcxo = 1.6f; #endif #if defined(NRF52_PLATFORM) SPI.setPins(P_LORA_MISO, P_LORA_SCLK, P_LORA_MOSI); SPI.begin(); #elif defined(P_LORA_SCLK) spi.begin(P_LORA_SCLK, P_LORA_MISO, P_LORA_MOSI); #endif int status = radio.begin(LORA_FREQ, LORA_BW, LORA_SF, LORA_CR, RADIOLIB_SX126X_SYNC_WORD_PRIVATE, LORA_TX_POWER, 8, tcxo); if (status != RADIOLIB_ERR_NONE) { Serial.print("ERROR: radio init failed: "); Serial.println(status); halt(); } radio.setCRC(0); #ifdef SX126X_CURRENT_LIMIT radio.setCurrentLimit(SX126X_CURRENT_LIMIT); #endif #ifdef SX126X_DIO2_AS_RF_SWITCH radio.setDio2AsRfSwitch(SX126X_DIO2_AS_RF_SWITCH); #endif fast_rng.begin(radio.random(0x7FFFFFFF)); RadioNoiseListener trng(radio); #if defined(NRF52_PLATFORM) InternalFS.begin(); the_mesh.begin(InternalFS, trng); #ifdef BLE_PIN_CODE char dev_name[32+10]; const char* prefix = #ifdef BLE_NAME_PREFIX BLE_NAME_PREFIX; #else "MeshCore-"; #endif sprintf(dev_name, "%s%s", prefix, the_mesh.getNodeName()); serial_interface.begin(dev_name, the_mesh.getBLEPin()); #else pinMode(WB_IO2, OUTPUT); serial_interface.begin(Serial); #endif the_mesh.startInterface(serial_interface); #elif defined(ESP32) SPIFFS.begin(true); the_mesh.begin(SPIFFS, trng); #ifdef WIFI_SSID WiFi.begin(WIFI_SSID, WIFI_PWD); serial_interface.begin(TCP_PORT); #elif defined(BLE_PIN_CODE) char dev_name[32+10]; const char* prefix = #ifdef BLE_NAME_PREFIX BLE_NAME_PREFIX; #else "MeshCore-"; #endif sprintf(dev_name, "%s%s", prefix, the_mesh.getNodeName()); serial_interface.begin(dev_name, the_mesh.getBLEPin()); #else serial_interface.begin(Serial); #endif the_mesh.startInterface(serial_interface); #else #error "need to define filesystem" #endif #ifdef DISPLAY_CLASS display.begin(); ui_task.begin(the_mesh.getNodeName(), FIRMWARE_BUILD_DATE, the_mesh.getBLEPin()); #endif } void loop() { the_mesh.loop(); }