#include <Arduino.h>
#include "WioTrackerL1Board.h"

#include <bluefruit.h>
#include <Wire.h>

static BLEDfu bledfu;

static void connect_callback(uint16_t conn_handle) {
  (void)conn_handle;
  MESH_DEBUG_PRINTLN("BLE client connected");
}

static void disconnect_callback(uint16_t conn_handle, uint8_t reason) {
  (void)conn_handle;
  (void)reason;

  MESH_DEBUG_PRINTLN("BLE client disconnected");
}

void WioTrackerL1Board::begin() {
  // for future use, sub-classes SHOULD call this from their begin()
  startup_reason = BD_STARTUP_NORMAL;
  btn_prev_state = HIGH;

  pinMode(PIN_VBAT_READ, INPUT); // VBAT ADC input
  // Set all button pins to INPUT_PULLUP
  pinMode(PIN_BUTTON1, INPUT_PULLUP);
  pinMode(PIN_BUTTON2, INPUT_PULLUP);
  pinMode(PIN_BUTTON3, INPUT_PULLUP);
  pinMode(PIN_BUTTON4, INPUT_PULLUP);
  pinMode(PIN_BUTTON5, INPUT_PULLUP);
  pinMode(PIN_BUTTON6, INPUT_PULLUP);
  

  #if defined(PIN_WIRE_SDA) && defined(PIN_WIRE_SCL)
    Wire.setPins(PIN_WIRE_SDA, PIN_WIRE_SCL);
  #endif

  Wire.begin();

  #ifdef P_LORA_TX_LED
    pinMode(P_LORA_TX_LED, OUTPUT);
    digitalWrite(P_LORA_TX_LED, LOW);
  #endif

  delay(10);   // give sx1262 some time to power up
}

bool WioTrackerL1Board::startOTAUpdate(const char* id, char reply[]) {
  // Config the peripheral connection with maximum bandwidth
  // more SRAM required by SoftDevice
  // Note: All config***() function must be called before begin()
  Bluefruit.configPrphBandwidth(BANDWIDTH_MAX);
  Bluefruit.configPrphConn(92, BLE_GAP_EVENT_LENGTH_MIN, 16, 16);

  Bluefruit.begin(1, 0);
  // Set max power. Accepted values are: -40, -30, -20, -16, -12, -8, -4, 0, 4
  Bluefruit.setTxPower(4);
  // Set the BLE device name
  Bluefruit.setName("WioTrackerL1 OTA");

  Bluefruit.Periph.setConnectCallback(connect_callback);
  Bluefruit.Periph.setDisconnectCallback(disconnect_callback);

  // To be consistent OTA DFU should be added first if it exists
  bledfu.begin();

  // Set up and start advertising
  // Advertising packet
  Bluefruit.Advertising.addFlags(BLE_GAP_ADV_FLAGS_LE_ONLY_GENERAL_DISC_MODE);
  Bluefruit.Advertising.addTxPower();
  Bluefruit.Advertising.addName();

  /* Start Advertising
    - Enable auto advertising if disconnected
    - Interval:  fast mode = 20 ms, slow mode = 152.5 ms
    - Timeout for fast mode is 30 seconds
    - Start(timeout) with timeout = 0 will advertise forever (until connected)

    For recommended advertising interval
    https://developer.apple.com/library/content/qa/qa1931/_index.html
  */
  Bluefruit.Advertising.restartOnDisconnect(true);
  Bluefruit.Advertising.setInterval(32, 244); // in unit of 0.625 ms
  Bluefruit.Advertising.setFastTimeout(30);   // number of seconds in fast mode
  Bluefruit.Advertising.start(0);             // 0 = Don't stop advertising after n seconds

  uint8_t mac_addr[6];
  memset(mac_addr, 0, sizeof(mac_addr));
  Bluefruit.getAddr(mac_addr);
  sprintf(reply, "OK - mac: %02X:%02X:%02X:%02X:%02X:%02X", 
      mac_addr[5], mac_addr[4], mac_addr[3], mac_addr[2], mac_addr[1], mac_addr[0]);

  return true;
}