dandri/MeshCore
1
0
Fork 0
mirror of https://github.com/meshcore-dev/MeshCore.git synced 2026-04-18 18:15:46 +00:00
Code Issues Packages Projects Releases Wiki Activity
Files
dev
MeshCore/variants/heltec_v4/platformio.ini
Liam Cottle 3ff8b17660 Merge pull request #1833 from olanwe/set-wifi-offline-queue-sizes 
Set OFFLINE_QUEUE_SIZE=256 for missing WiFi companion environments
2026-04-13 01:41:07 +12:00

410 lines
11 KiB
INI
Raw Permalink Blame History

[Heltec_lora32_v4]
extends = esp32_base
board = heltec_v4
build_flags =
${esp32_base.build_flags}
${sensor_base.build_flags}
-I variants/heltec_v4
-D HELTEC_LORA_V4
-D USE_SX1262
-D ESP32_CPU_FREQ=80
-D RADIO_CLASS=CustomSX1262
-D WRAPPER_CLASS=CustomSX1262Wrapper
-D P_LORA_TX_LED=35
-D P_LORA_DIO_1=14
-D P_LORA_NSS=8
-D P_LORA_RESET=12
-D P_LORA_BUSY=13
-D P_LORA_SCLK=9
-D P_LORA_MISO=11
-D P_LORA_MOSI=10
-D P_LORA_PA_POWER=7 ; // VFEM_Ctrl -LDO power enable
-D P_LORA_GC1109_PA_EN=2 ; // CSD - GC1109 chip enable (HIGH=on)
-D P_LORA_GC1109_PA_TX_EN=46 ;// CPS - GC1109 PA mode (HIGH=full PA, LOW=bypass)
-D P_LORA_KCT8103L_PA_CSD=2
-D P_LORA_KCT8103L_PA_CTX=5
-D PIN_USER_BTN=0
-D PIN_VEXT_EN=36
-D PIN_VEXT_EN_ACTIVE=HIGH
-D LORA_TX_POWER=10 ;If it is configured as 10 here, the final output will be 22 dbm.
-D MAX_LORA_TX_POWER=22 ; Max SX1262 output
-D SX126X_REGISTER_PATCH=1 ; Patch register 0x8B5 for improved RX
-D SX126X_DIO2_AS_RF_SWITCH=true ; GC1109 CTX is controlled by SX1262 DIO2
-D SX126X_DIO3_TCXO_VOLTAGE=1.8
-D SX126X_CURRENT_LIMIT=140
-D SX126X_RX_BOOSTED_GAIN=1 ; In some cases, commenting this out will improve RX
-D PIN_GPS_RX=38
-D PIN_GPS_TX=39
-D PIN_GPS_RESET=42
-D PIN_GPS_RESET_ACTIVE=LOW
-D PIN_GPS_EN=34
-D PIN_GPS_EN_ACTIVE=LOW
-D ENV_INCLUDE_GPS=1
-D PIN_ADC_CTRL=37
-D PIN_VBAT_READ=1
build_src_filter = ${esp32_base.build_src_filter}
+<../variants/heltec_v4>
+<helpers/sensors>
lib_deps =
${esp32_base.lib_deps}
${sensor_base.lib_deps}
[heltec_v4_oled]
extends = Heltec_lora32_v4
build_flags =
${Heltec_lora32_v4.build_flags}
-D HELTEC_LORA_V4_OLED
-D PIN_BOARD_SDA=17
-D PIN_BOARD_SCL=18
-D PIN_OLED_RESET=21
build_src_filter= ${Heltec_lora32_v4.build_src_filter}
lib_deps = ${Heltec_lora32_v4.lib_deps}
[heltec_v4_tft]
extends = Heltec_lora32_v4
build_flags =
${Heltec_lora32_v4.build_flags}
-D HELTEC_LORA_V4_TFT
-D PIN_BOARD_SDA=4
-D PIN_BOARD_SCL=3
-D DISPLAY_SCALE_X=2.5
-D DISPLAY_SCALE_Y=3.75
-D PIN_TFT_RST=18
-D PIN_TFT_VDD_CTL=-1
-D PIN_TFT_LEDA_CTL=21
-D PIN_TFT_LEDA_CTL_ACTIVE=HIGH
-D PIN_TFT_CS=15
-D PIN_TFT_DC=16
-D PIN_TFT_SCL=17
-D PIN_TFT_SDA=33
build_src_filter= ${Heltec_lora32_v4.build_src_filter}
lib_deps =
${Heltec_lora32_v4.lib_deps}
adafruit/Adafruit ST7735 and ST7789 Library @ ^1.11.0
[env:heltec_v4_repeater]
extends = heltec_v4_oled
build_flags =
${heltec_v4_oled.build_flags}
-D DISPLAY_CLASS=SSD1306Display
-D ADVERT_NAME='"Heltec Repeater"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${heltec_v4_oled.build_src_filter}
+<helpers/ui/SSD1306Display.cpp>
+<../examples/simple_repeater>
lib_deps =
${heltec_v4_oled.lib_deps}
${esp32_ota.lib_deps}
bakercp/CRC32 @ ^2.0.0
[env:heltec_v4_repeater_bridge_espnow]
extends = heltec_v4_oled
build_flags =
${heltec_v4_oled.build_flags}
-D DISPLAY_CLASS=SSD1306Display
-D ADVERT_NAME='"ESPNow Bridge"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
-D WITH_ESPNOW_BRIDGE=1
; -D BRIDGE_DEBUG=1
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${heltec_v4_oled.build_src_filter}
+<helpers/bridges/ESPNowBridge.cpp>
+<helpers/ui/SSD1306Display.cpp>
+<../examples/simple_repeater>
lib_deps =
${heltec_v4_oled.lib_deps}
${esp32_ota.lib_deps}
[env:heltec_v4_room_server]
extends = heltec_v4_oled
build_flags =
${heltec_v4_oled.build_flags}
-D DISPLAY_CLASS=SSD1306Display
-D ADVERT_NAME='"Heltec Room"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D ROOM_PASSWORD='"hello"'
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${heltec_v4_oled.build_src_filter}
+<helpers/ui/SSD1306Display.cpp>
+<../examples/simple_room_server>
lib_deps =
${heltec_v4_oled.lib_deps}
${esp32_ota.lib_deps}
[env:heltec_v4_terminal_chat]
extends = heltec_v4_oled
build_flags =
${heltec_v4_oled.build_flags}
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=1
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${heltec_v4_oled.build_src_filter}
+<../examples/simple_secure_chat/main.cpp>
lib_deps =
${heltec_v4_oled.lib_deps}
densaugeo/base64 @ ~1.4.0
[env:heltec_v4_companion_radio_usb]
extends = heltec_v4_oled
build_flags =
${heltec_v4_oled.build_flags}
-I examples/companion_radio/ui-new
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
-D DISPLAY_CLASS=SSD1306Display
; NOTE: DO NOT ENABLE --> -D MESH_PACKET_LOGGING=1
; NOTE: DO NOT ENABLE --> -D MESH_DEBUG=1
build_src_filter = ${heltec_v4_oled.build_src_filter}
+<helpers/ui/SSD1306Display.cpp>
+<helpers/ui/MomentaryButton.cpp>
+<../examples/companion_radio/*.cpp>
+<../examples/companion_radio/ui-new/*.cpp>
lib_deps =
${heltec_v4_oled.lib_deps}
densaugeo/base64 @ ~1.4.0
[env:heltec_v4_companion_radio_ble]
extends = heltec_v4_oled
build_flags =
${heltec_v4_oled.build_flags}
-I examples/companion_radio/ui-new
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
-D DISPLAY_CLASS=SSD1306Display
-D BLE_PIN_CODE=123456 ; dynamic, random PIN
-D AUTO_SHUTDOWN_MILLIVOLTS=3400
-D BLE_DEBUG_LOGGING=1
-D OFFLINE_QUEUE_SIZE=256
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${heltec_v4_oled.build_src_filter}
+<helpers/ui/SSD1306Display.cpp>
+<helpers/ui/MomentaryButton.cpp>
+<helpers/esp32/*.cpp>
+<../examples/companion_radio/*.cpp>
+<../examples/companion_radio/ui-new/*.cpp>
lib_deps =
${heltec_v4_oled.lib_deps}
densaugeo/base64 @ ~1.4.0
[env:heltec_v4_companion_radio_wifi]
extends = heltec_v4_oled
build_flags =
${heltec_v4_oled.build_flags}
-I examples/companion_radio/ui-new
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
-D OFFLINE_QUEUE_SIZE=256
-D DISPLAY_CLASS=SSD1306Display
-D WIFI_DEBUG_LOGGING=1
-D WIFI_SSID='"myssid"'
-D WIFI_PWD='"mypwd"'
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${heltec_v4_oled.build_src_filter}
+<helpers/ui/SSD1306Display.cpp>
+<helpers/ui/MomentaryButton.cpp>
+<helpers/esp32/*.cpp>
+<../examples/companion_radio/*.cpp>
+<../examples/companion_radio/ui-new/*.cpp>
lib_deps =
${heltec_v4_oled.lib_deps}
densaugeo/base64 @ ~1.4.0
[env:heltec_v4_sensor]
extends = heltec_v4_oled
build_flags =
${heltec_v4_oled.build_flags}
-D ADVERT_NAME='"Heltec v4 Sensor"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D ENV_PIN_SDA=3
-D ENV_PIN_SCL=4
-D DISPLAY_CLASS=SSD1306Display
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${heltec_v4_oled.build_src_filter}
+<helpers/ui/SSD1306Display.cpp>
+<../examples/simple_sensor>
lib_deps =
${heltec_v4_oled.lib_deps}
${esp32_ota.lib_deps}
[env:heltec_v4_tft_repeater]
extends = heltec_v4_tft
build_flags =
${heltec_v4_tft.build_flags}
-D DISPLAY_CLASS=ST7789LCDDisplay
-D ADVERT_NAME='"Heltec Repeater"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${heltec_v4_tft.build_src_filter}
+<helpers/ui/ST7789LCDDisplay.cpp>
+<../examples/simple_repeater>
lib_deps =
${heltec_v4_tft.lib_deps}
${esp32_ota.lib_deps}
bakercp/CRC32 @ ^2.0.0
[env:heltec_v4_tft_repeater_bridge_espnow]
extends = heltec_v4_tft
build_flags =
${heltec_v4_tft.build_flags}
-D DISPLAY_CLASS=ST7789LCDDisplay
-D ADVERT_NAME='"ESPNow Bridge"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
-D WITH_ESPNOW_BRIDGE=1
; -D BRIDGE_DEBUG=1
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${heltec_v4_tft.build_src_filter}
+<helpers/bridges/ESPNowBridge.cpp>
+<helpers/ui/ST7789LCDDisplay.cpp>
+<../examples/simple_repeater>
lib_deps =
${heltec_v4_tft.lib_deps}
${esp32_ota.lib_deps}
[env:heltec_v4_tft_room_server]
extends = heltec_v4_tft
build_flags =
${heltec_v4_tft.build_flags}
-D DISPLAY_CLASS=ST7789LCDDisplay
-D ADVERT_NAME='"Heltec Room"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D ROOM_PASSWORD='"hello"'
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${heltec_v4_tft.build_src_filter}
+<helpers/ui/ST7789LCDDisplay.cpp>
+<../examples/simple_room_server>
lib_deps =
${heltec_v4_tft.lib_deps}
${esp32_ota.lib_deps}
[env:heltec_v4_tft_terminal_chat]
extends = heltec_v4_tft
build_flags =
${heltec_v4_tft.build_flags}
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=1
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${heltec_v4_tft.build_src_filter}
+<../examples/simple_secure_chat/main.cpp>
lib_deps =
${heltec_v4_tft.lib_deps}
densaugeo/base64 @ ~1.4.0
[env:heltec_v4_tft_companion_radio_usb]
extends = heltec_v4_tft
build_flags =
${heltec_v4_tft.build_flags}
-I examples/companion_radio/ui-new
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
-D DISPLAY_CLASS=ST7789LCDDisplay
; NOTE: DO NOT ENABLE --> -D MESH_PACKET_LOGGING=1
; NOTE: DO NOT ENABLE --> -D MESH_DEBUG=1
build_src_filter = ${heltec_v4_tft.build_src_filter}
+<helpers/ui/ST7789LCDDisplay.cpp>
+<helpers/ui/MomentaryButton.cpp>
+<../examples/companion_radio/*.cpp>
+<../examples/companion_radio/ui-new/*.cpp>
lib_deps =
${heltec_v4_tft.lib_deps}
densaugeo/base64 @ ~1.4.0
[env:heltec_v4_tft_companion_radio_ble]
extends = heltec_v4_tft
build_flags =
${heltec_v4_tft.build_flags}
-I examples/companion_radio/ui-new
-D DISPLAY_CLASS=ST7789LCDDisplay
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
-D BLE_PIN_CODE=123456 ; dynamic, random PIN
-D AUTO_SHUTDOWN_MILLIVOLTS=3400
-D BLE_DEBUG_LOGGING=1
-D OFFLINE_QUEUE_SIZE=256
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${heltec_v4_tft.build_src_filter}
+<helpers/ui/ST7789LCDDisplay.cpp>
+<helpers/ui/MomentaryButton.cpp>
+<helpers/esp32/*.cpp>
+<../examples/companion_radio/*.cpp>
+<../examples/companion_radio/ui-new/*.cpp>
lib_deps =
${heltec_v4_tft.lib_deps}
densaugeo/base64 @ ~1.4.0
[env:heltec_v4_tft_companion_radio_wifi]
extends = heltec_v4_tft
build_flags =
${heltec_v4_tft.build_flags}
-I examples/companion_radio/ui-new
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
-D OFFLINE_QUEUE_SIZE=256
-D DISPLAY_CLASS=ST7789LCDDisplay
-D WIFI_DEBUG_LOGGING=1
-D WIFI_SSID='"myssid"'
-D WIFI_PWD='"mypwd"'
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${heltec_v4_tft.build_src_filter}
+<helpers/ui/ST7789LCDDisplay.cpp>
+<helpers/ui/MomentaryButton.cpp>
+<helpers/esp32/*.cpp>
+<../examples/companion_radio/*.cpp>
+<../examples/companion_radio/ui-new/*.cpp>
lib_deps =
${heltec_v4_tft.lib_deps}
densaugeo/base64 @ ~1.4.0
[env:heltec_v4_tft_sensor]
extends = heltec_v4_tft
build_flags =
${heltec_v4_tft.build_flags}
-D ADVERT_NAME='"Heltec v4 Sensor"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D ENV_PIN_SDA=3
-D ENV_PIN_SCL=4
-D DISPLAY_CLASS=ST7789LCDDisplay
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${heltec_v4_tft.build_src_filter}
+<helpers/ui/ST7789LCDDisplay.cpp>
+<../examples/simple_sensor>
lib_deps =
${heltec_v4_tft.lib_deps}
${esp32_ota.lib_deps}
Reference in New Issue View Git Blame Copy Permalink