dandri/MeshCore
1
0
Fork 0
mirror of https://github.com/meshcore-dev/MeshCore.git synced 2026-08-28 13:44:28 +00:00
Code Issues Packages Projects Releases Wiki Activity
Files
dev
MeshCore/variants/meshnology_w12/platformio.ini
T

217 lines
6.2 KiB
INI
Raw Permalink Blame History

[meshnology_w12]
extends = esp32_base
board = meshnology_w12
build_flags =
${esp32_base.build_flags}
${sensor_base.build_flags}
-I variants/meshnology_w12
-D MESHNOLOGY_W12
-D ESP32_CPU_FREQ=80
-D RADIO_CLASS=CustomLR2021
-D WRAPPER_CLASS=CustomLR2021Wrapper
-D USE_LR2021
-D NEOPIXEL_LED=46
-D NEOPIXEL_BRIGHTNESS=64
-D P_LORA_DIO_1=14
-D LR2021_IRQ_DIO=8 ; GPIO14 is connected to LR2021 DIO8
-D P_LORA_NSS=8
-D P_LORA_SCLK=9
-D P_LORA_MOSI=10
-D P_LORA_MISO=11
-D P_LORA_RESET=12
-D P_LORA_BUSY=13
-D LR2021_TCXO_VOLTAGE=0.0f ; this board has no tcxo
-D RF_SWITCH_TABLE ; used below in commented code for the RF switch table.
-D P_LORA_LF_PA_POWER=4 ; PA_EN_M - power enable for the GC1109 868/915 PA
-D P_LORA_HF_PA_POWER=3 ; PA_EN_G - power enable for RFX2402E 2.4G PA
-D PIN_USER_BTN=0
-D PIN_VEXT_EN=45
-D PIN_VEXT_EN_ACTIVE=HIGH
-D LORA_TX_POWER=4
-D MAX_LORA_TX_POWER=4 ; GC1109 datasheet says max input at TX port is +5dbm, confirmed full saturation seems to occur at around 3-4dbm
-D PIN_GPS_RX=38
-D PIN_GPS_TX=39
-D PIN_GPS_RESET=42
-D PIN_GPS_RESET_ACTIVE=LOW
-D PIN_GPS_EN=48
-D PIN_GPS_EN_ACTIVE=LOW
; -D ENV_INCLUDE_GPS=1
-D PIN_VBAT_READ=1
-D PIN_ADC_CTRL=2
-D PIN_BOARD_SDA=17
-D PIN_BOARD_SCL=18
-D PIN_RESET=47
build_src_filter = ${esp32_base.build_src_filter}
+<../variants/meshnology_w12>
+<helpers/sensors>
lib_deps =
${esp32_base.lib_deps}
${sensor_base.lib_deps}
[env:meshnology_w12_repeater]
extends = meshnology_w12
build_flags =
${meshnology_w12.build_flags}
-D DISPLAY_CLASS=SSD1306Display
-D ADVERT_NAME='"Meshnology W12 Repeater"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${meshnology_w12.build_src_filter}
+<helpers/ui/SSD1306Display.cpp>
+<../examples/simple_repeater>
lib_deps =
${meshnology_w12.lib_deps}
${esp32_ota.lib_deps}
bakercp/CRC32 @ ^2.0.0
[env:meshnology_w12_repeater_bridge_espnow]
extends = meshnology_w12
build_flags =
${meshnology_w12.build_flags}
-D DISPLAY_CLASS=SSD1306Display
-D ADVERT_NAME='"ESPNow Bridge"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
-D WITH_ESPNOW_BRIDGE=1
; -D BRIDGE_DEBUG=1
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${meshnology_w12.build_src_filter}
+<helpers/bridges/ESPNowBridge.cpp>
+<helpers/ui/SSD1306Display.cpp>
+<../examples/simple_repeater>
lib_deps =
${meshnology_w12.lib_deps}
${esp32_ota.lib_deps}
[env:meshnology_w12_room_server]
extends = meshnology_w12
build_flags =
${meshnology_w12.build_flags}
-D DISPLAY_CLASS=SSD1306Display
-D ADVERT_NAME='"Meshnology W12 Room"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D ROOM_PASSWORD='"hello"'
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${meshnology_w12.build_src_filter}
+<helpers/ui/SSD1306Display.cpp>
+<../examples/simple_room_server>
lib_deps =
${meshnology_w12.lib_deps}
${esp32_ota.lib_deps}
[env:meshnology_w12_terminal_chat]
extends = meshnology_w12
build_flags =
${meshnology_w12.build_flags}
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=1
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${meshnology_w12.build_src_filter}
+<../examples/simple_secure_chat/main.cpp>
lib_deps =
${meshnology_w12.lib_deps}
densaugeo/base64 @ ~1.4.0
[env:meshnology_w12_companion_radio_usb]
extends = meshnology_w12
build_flags =
${meshnology_w12.build_flags}
-I examples/companion_radio/ui-new
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
-D DISPLAY_CLASS=SSD1306Display
; NOTE: DO NOT ENABLE --> -D MESH_PACKET_LOGGING=1
; NOTE: DO NOT ENABLE --> -D MESH_DEBUG=1
build_src_filter = ${meshnology_w12.build_src_filter}
+<helpers/ui/SSD1306Display.cpp>
+<helpers/ui/MomentaryButton.cpp>
+<../examples/companion_radio/*.cpp>
+<../examples/companion_radio/ui-new/*.cpp>
lib_deps =
${meshnology_w12.lib_deps}
densaugeo/base64 @ ~1.4.0
[env:meshnology_w12_companion_radio_ble]
extends = meshnology_w12
build_flags =
${meshnology_w12.build_flags}
-I examples/companion_radio/ui-new
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
-D DISPLAY_CLASS=SSD1306Display
-D BLE_PIN_CODE=123456 ; dynamic, random PIN
; -D AUTO_SHUTDOWN_MILLIVOLTS=3400 ; disabled by default, otherwise reading bounce causes shutdown when there's no battery connected.
; -D BLE_DEBUG_LOGGING=1
-D OFFLINE_QUEUE_SIZE=256
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${meshnology_w12.build_src_filter}
+<helpers/ui/SSD1306Display.cpp>
+<helpers/ui/MomentaryButton.cpp>
+<helpers/esp32/*.cpp>
+<../examples/companion_radio/*.cpp>
+<../examples/companion_radio/ui-new/*.cpp>
lib_deps =
${meshnology_w12.lib_deps}
densaugeo/base64 @ ~1.4.0
[env:meshnology_w12_companion_radio_wifi]
extends = meshnology_w12
build_flags =
${meshnology_w12.build_flags}
-I examples/companion_radio/ui-new
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
-D OFFLINE_QUEUE_SIZE=256
-D DISPLAY_CLASS=SSD1306Display
; -D WIFI_DEBUG_LOGGING=1
-D WIFI_SSID='"myssid"'
-D WIFI_PWD='"mypwd"'
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${meshnology_w12.build_src_filter}
+<helpers/ui/SSD1306Display.cpp>
+<helpers/ui/MomentaryButton.cpp>
+<helpers/esp32/*.cpp>
+<../examples/companion_radio/*.cpp>
+<../examples/companion_radio/ui-new/*.cpp>
lib_deps =
${meshnology_w12.lib_deps}
densaugeo/base64 @ ~1.4.0
[env:meshnology_w12_sensor]
extends = meshnology_w12
build_flags =
${meshnology_w12.build_flags}
-D ADVERT_NAME='"Meshnology W12 Sensor"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D ENV_PIN_SDA=3
-D ENV_PIN_SCL=4
-D DISPLAY_CLASS=SSD1306Display
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${meshnology_w12.build_src_filter}
+<helpers/ui/SSD1306Display.cpp>
+<../examples/simple_sensor>
lib_deps =
${meshnology_w12.lib_deps}
${esp32_ota.lib_deps}
[env:meshnology_w12_kiss_modem]
extends = meshnology_w12
build_src_filter = ${meshnology_w12.build_src_filter}
+<../examples/kiss_modem/>
Reference in New Issue View Git Blame Copy Permalink