mirror of
https://github.com/meshcore-dev/MeshCore.git
synced 2026-04-04 05:25:54 +00:00
198 lines
5.3 KiB
C
198 lines
5.3 KiB
C
/*
|
|
Copyright (c) 2014-2015 Arduino LLC. All right reserved.
|
|
Copyright (c) 2016 Sandeep Mistry All right reserved.
|
|
Copyright (c) 2018, Adafruit Industries (adafruit.com)
|
|
|
|
This library is free software; you can redistribute it and/or
|
|
modify it under the terms of the GNU Lesser General Public
|
|
License as published by the Free Software Foundation; either
|
|
version 2.1 of the License, or (at your option) any later version.
|
|
This library is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
|
See the GNU Lesser General Public License for more details.
|
|
You should have received a copy of the GNU Lesser General Public
|
|
License along with this library; if not, write to the Free Software
|
|
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
|
*/
|
|
|
|
#ifndef _VARIANT_RAK4630_
|
|
#define _VARIANT_RAK4630_
|
|
|
|
#define RAK4630
|
|
|
|
/** Master clock frequency */
|
|
#define VARIANT_MCK (64000000ul)
|
|
|
|
#define USE_LFXO // Board uses 32khz crystal for LF
|
|
// define USE_LFRC // Board uses RC for LF
|
|
|
|
/*----------------------------------------------------------------------------
|
|
* Headers
|
|
*----------------------------------------------------------------------------*/
|
|
|
|
#include "WVariant.h"
|
|
|
|
#ifdef __cplusplus
|
|
extern "C"
|
|
{
|
|
#endif // __cplusplus
|
|
|
|
/*
|
|
* WisBlock Base GPIO definitions
|
|
*/
|
|
static const uint8_t WB_IO1 = 17; // SLOT_A SLOT_B
|
|
static const uint8_t WB_IO2 = 34; // SLOT_A SLOT_B
|
|
static const uint8_t WB_IO3 = 21; // SLOT_C
|
|
static const uint8_t WB_IO4 = 4; // SLOT_C
|
|
static const uint8_t WB_IO5 = 9; // SLOT_D
|
|
static const uint8_t WB_IO6 = 10; // SLOT_D
|
|
static const uint8_t WB_SW1 = 33; // IO_SLOT
|
|
static const uint8_t WB_A0 = 5; // IO_SLOT
|
|
static const uint8_t WB_A1 = 31; // IO_SLOT
|
|
static const uint8_t WB_I2C1_SDA = 13; // SENSOR_SLOT IO_SLOT
|
|
static const uint8_t WB_I2C1_SCL = 14; // SENSOR_SLOT IO_SLOT
|
|
static const uint8_t WB_I2C2_SDA = 24; // IO_SLOT
|
|
static const uint8_t WB_I2C2_SCL = 25; // IO_SLOT
|
|
static const uint8_t WB_SPI_CS = 26; // IO_SLOT
|
|
static const uint8_t WB_SPI_CLK = 3; // IO_SLOT
|
|
static const uint8_t WB_SPI_MISO = 29; // IO_SLOT
|
|
static const uint8_t WB_SPI_MOSI = 30; // IO_SLOT
|
|
|
|
// Number of pins defined in PinDescription array
|
|
#define PINS_COUNT (48)
|
|
#define NUM_DIGITAL_PINS (48)
|
|
#define NUM_ANALOG_INPUTS (6)
|
|
#define NUM_ANALOG_OUTPUTS (0)
|
|
|
|
// LEDs
|
|
#define PIN_LED1 (35)
|
|
#define PIN_LED2 (36)
|
|
|
|
#define LED_BUILTIN PIN_LED1
|
|
#define LED_CONN PIN_LED2
|
|
|
|
#define LED_GREEN PIN_LED1
|
|
#define LED_BLUE PIN_LED2
|
|
|
|
#define LED_STATE_ON 1 // State when LED is litted
|
|
|
|
/*
|
|
* Buttons
|
|
*/
|
|
// RAK4631 has no buttons
|
|
|
|
/*
|
|
* Analog pins
|
|
*/
|
|
#define PIN_A0 (5) //(3)
|
|
#define PIN_A1 (31) //(4)
|
|
#define PIN_A2 (28)
|
|
#define PIN_A3 (29)
|
|
#define PIN_A4 (30)
|
|
#define PIN_A5 (31)
|
|
#define PIN_A6 (0xff)
|
|
#define PIN_A7 (0xff)
|
|
|
|
static const uint8_t A0 = PIN_A0;
|
|
static const uint8_t A1 = PIN_A1;
|
|
static const uint8_t A2 = PIN_A2;
|
|
static const uint8_t A3 = PIN_A3;
|
|
static const uint8_t A4 = PIN_A4;
|
|
static const uint8_t A5 = PIN_A5;
|
|
static const uint8_t A6 = PIN_A6;
|
|
static const uint8_t A7 = PIN_A7;
|
|
#define ADC_RESOLUTION 14
|
|
|
|
// Power management boot protection threshold (millivolts)
|
|
// Set to 0 to disable boot protection
|
|
#define PWRMGT_VOLTAGE_BOOTLOCK 3300 // Won't boot below this voltage (mV)
|
|
// LPCOMP wake configuration (voltage recovery from SYSTEMOFF)
|
|
// AIN3 = P0.05 = PIN_A0 / PIN_VBAT_READ
|
|
#define PWRMGT_LPCOMP_AIN 3
|
|
#define PWRMGT_LPCOMP_REFSEL 4 // 5/8 VDD (~3.13-3.44V)
|
|
|
|
// Other pins
|
|
#define PIN_AREF (2)
|
|
#define PIN_NFC1 (9)
|
|
#define PIN_NFC2 (10)
|
|
|
|
static const uint8_t AREF = PIN_AREF;
|
|
|
|
/*
|
|
* Serial interfaces
|
|
*/
|
|
// TXD1 RXD1 on Base Board
|
|
#define PIN_SERIAL1_RX (15)
|
|
#define PIN_SERIAL1_TX (16)
|
|
|
|
// TXD0 RXD0 on Base Board
|
|
#define PIN_SERIAL2_RX (19)
|
|
#define PIN_SERIAL2_TX (20)
|
|
|
|
/*
|
|
* SPI Interfaces
|
|
*/
|
|
#define SPI_INTERFACES_COUNT 1
|
|
|
|
#define PIN_SPI_MISO (29)
|
|
#define PIN_SPI_MOSI (30)
|
|
#define PIN_SPI_SCK (3)
|
|
|
|
static const uint8_t SS = 26;
|
|
static const uint8_t MOSI = PIN_SPI_MOSI;
|
|
static const uint8_t MISO = PIN_SPI_MISO;
|
|
static const uint8_t SCK = PIN_SPI_SCK;
|
|
|
|
// LoRa radio module pins for RAK4631
|
|
#define P_LORA_DIO_1 (47)
|
|
#define P_LORA_NSS (42)
|
|
#define P_LORA_RESET (-1)
|
|
#define P_LORA_BUSY (46)
|
|
#define P_LORA_SCLK (43)
|
|
#define P_LORA_MISO (45)
|
|
#define P_LORA_MOSI (44)
|
|
#define SX126X_POWER_EN (37)
|
|
|
|
#define SX126X_DIO2_AS_RF_SWITCH true
|
|
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
|
|
|
|
/*
|
|
* Wire Interfaces
|
|
*/
|
|
#define WIRE_INTERFACES_COUNT 2
|
|
|
|
#define PIN_WIRE_SDA (13)
|
|
#define PIN_WIRE_SCL (14)
|
|
|
|
#define PIN_WIRE1_SDA (24)
|
|
#define PIN_WIRE1_SCL (25)
|
|
|
|
// QSPI Pins
|
|
// QSPI occupied by GPIO's
|
|
#define PIN_QSPI_SCK 3 // 19
|
|
#define PIN_QSPI_CS 26 // 17
|
|
#define PIN_QSPI_IO0 30 // 20
|
|
#define PIN_QSPI_IO1 29 // 21
|
|
#define PIN_QSPI_IO2 28 // 22
|
|
#define PIN_QSPI_IO3 2 // 23
|
|
|
|
// On-board QSPI Flash
|
|
// No onboard flash
|
|
#define EXTERNAL_FLASH_DEVICES IS25LP080D
|
|
#define EXTERNAL_FLASH_USE_QSPI
|
|
|
|
#define PIN_GPS_1PPS 17 //GPS PPS pin
|
|
#define GPS_BAUD_RATE 9600
|
|
#define GPS_ADDRESS 0x42 //i2c address for GPS
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
/*----------------------------------------------------------------------------
|
|
* Arduino objects - C++ only
|
|
*----------------------------------------------------------------------------*/
|
|
|
|
#endif
|