mirror of
https://github.com/meshcore-dev/MeshCore.git
synced 2026-11-22 20:29:02 +00:00
Add a dimmed heartbeat for the SenseCAP Solar (P1 Pro) white LED in the repeater firmware, implemented entirely as a SenseCapSolarBoard::loop() override so no example main.cpp needs to be touched: - 100 ms pulse every 5 s, dimmed to 10% brightness via hardware PWM (NRF_PWM0 / HwPWM0, 1 kHz, COUNTERTOP 16000, compare 1600) - during the 4.9 s off phase the PWM peripheral is stopped (ENABLE=0), the pin is released (PSEL disconnect) and GPIO 11 is held LOW, so no HFCLK is demanded between pulses - on successful application-level "start ota" the PWM is stopped and the white LED goes steady full-brightness while BLE OTA is advertised; on failed start the heartbeat keeps blinking - powerOff() stops/releases the heartbeat PWM before shutting the LED off - non-blocking millis() timing with wrap-safe unsigned arithmetic - gated by SENSECAP_SOLAR_WHITE_LED, defined only in the SenseCap_Solar_repeater PlatformIO env, so the room-server and companion firmwares sharing this board class are unaffected No changes to LoRa/repeater forwarding, the blue TX LED, charging LEDs, GPS, power management, config storage or the bootloader.
84 lines
2.7 KiB
C++
84 lines
2.7 KiB
C++
#pragma once
|
|
|
|
#include <MeshCore.h>
|
|
#include <Arduino.h>
|
|
#include <helpers/NRF52Board.h>
|
|
|
|
class SenseCapSolarBoard : public NRF52BoardDCDC {
|
|
#ifdef SENSECAP_SOLAR_WHITE_LED
|
|
// Dimmed white-LED heartbeat state (repeater builds only; enabled with
|
|
// -D SENSECAP_SOLAR_WHITE_LED in the PlatformIO env, so room-server and
|
|
// companion firmwares sharing this board class are unaffected).
|
|
bool white_led_ota_active_ = false;
|
|
bool white_led_pulse_active_ = false;
|
|
uint32_t white_led_last_pulse_at_ = 0;
|
|
|
|
void whiteLedHeartbeatOn(); // start 1 kHz PWM at 10% duty on LED_WHITE
|
|
void whiteLedHeartbeatOff(); // stop/release PWM, hold LED_WHITE LOW
|
|
void updateWhiteStatusLed(); // non-blocking 100 ms pulse every 5000 ms
|
|
#endif
|
|
|
|
protected:
|
|
#ifdef NRF52_POWER_MANAGEMENT
|
|
void initiateShutdown(uint8_t reason) override;
|
|
#endif
|
|
|
|
public:
|
|
SenseCapSolarBoard() : NRF52Board("SENSECAP_SOLAR_OTA") {}
|
|
void begin();
|
|
|
|
#ifdef SENSECAP_SOLAR_WHITE_LED
|
|
// Runs the white-LED heartbeat; invoked by the example main loops via the
|
|
// existing board.loop() call (mesh::MainBoard::loop() is a no-op by default).
|
|
void loop() override;
|
|
bool startOTAUpdate(const char *id, char reply[]) override;
|
|
#endif
|
|
|
|
#if defined(P_LORA_TX_LED)
|
|
void onBeforeTransmit() override {
|
|
digitalWrite(P_LORA_TX_LED, HIGH); // turn TX LED on
|
|
}
|
|
void onAfterTransmit() override {
|
|
digitalWrite(P_LORA_TX_LED, LOW); // turn TX LED off
|
|
}
|
|
#endif
|
|
|
|
uint16_t getBattMilliVolts() override {
|
|
digitalWrite(VBAT_ENABLE, LOW);
|
|
int adcvalue = 0;
|
|
analogReadResolution(12);
|
|
analogReference(AR_INTERNAL_3_0);
|
|
delay(10);
|
|
adcvalue = analogRead(BATTERY_PIN);
|
|
return (adcvalue * ADC_MULTIPLIER * AREF_VOLTAGE) / 4.096;
|
|
}
|
|
|
|
const char* getManufacturerName() const override {
|
|
return "Seeed SenseCap Solar";
|
|
}
|
|
|
|
void powerOff() override {
|
|
#ifdef SENSECAP_SOLAR_WHITE_LED
|
|
whiteLedHeartbeatOff(); // stop/release the heartbeat PWM before shutdown
|
|
#endif
|
|
digitalWrite(LED_WHITE, LOW);
|
|
digitalWrite(LED_BLUE, LOW);
|
|
|
|
#ifdef PIN_USER_BTN
|
|
while (digitalRead(PIN_USER_BTN) == LOW);
|
|
// Keep pull-up enabled in system-off so the wake line doesn't float low.
|
|
nrf_gpio_cfg_sense_input(digitalPinToInterrupt(g_ADigitalPinMap[PIN_USER_BTN]), NRF_GPIO_PIN_PULLUP, NRF_GPIO_PIN_SENSE_LOW);
|
|
#elif defined(PIN_BUTTON1)
|
|
while (digitalRead(PIN_BUTTON1) == LOW);
|
|
// Keep pull-up enabled in system-off so the wake line doesn't float low.
|
|
nrf_gpio_cfg_sense_input(digitalPinToInterrupt(g_ADigitalPinMap[PIN_BUTTON1]), NRF_GPIO_PIN_PULLUP, NRF_GPIO_PIN_SENSE_LOW);
|
|
#endif
|
|
|
|
#ifdef NRF52_POWER_MANAGEMENT
|
|
initiateShutdown(SHUTDOWN_REASON_USER);
|
|
#else
|
|
NRF52Board::powerOff();
|
|
#endif
|
|
}
|
|
};
|