MeshCore/variants/heltec_v4_r8/HeltecV4R8Board.cpp

#include "HeltecV4R8Board.h"

void HeltecV4R8Board::begin() {
  ESP32Board::begin();

  periph_power.begin();
  periph_power.claim();  // R8 VEXT also feeds the LoRa antenna boost rail.

  loRaFEMControl.init();

#ifdef PIN_TOUCH_RST
  pinMode(PIN_TOUCH_RST, OUTPUT);
  digitalWrite(PIN_TOUCH_RST, HIGH);
  delay(10);
  digitalWrite(PIN_TOUCH_RST, LOW);
  delay(100);
  digitalWrite(PIN_TOUCH_RST, HIGH);
#endif

  esp_reset_reason_t reason = esp_reset_reason();
  if (reason == ESP_RST_DEEPSLEEP) {
    long wakeup_source = esp_sleep_get_ext1_wakeup_status();
    if (wakeup_source & (1 << P_LORA_DIO_1)) {
      startup_reason = BD_STARTUP_RX_PACKET;
    }

    rtc_gpio_hold_dis((gpio_num_t)P_LORA_NSS);
    rtc_gpio_deinit((gpio_num_t)P_LORA_DIO_1);
  }
}

void HeltecV4R8Board::onBeforeTransmit(void) {
  digitalWrite(P_LORA_TX_LED, HIGH);
  loRaFEMControl.setTxModeEnable();
}

void HeltecV4R8Board::onAfterTransmit(void) {
  digitalWrite(P_LORA_TX_LED, LOW);
  loRaFEMControl.setRxModeEnable();
}

void HeltecV4R8Board::enterDeepSleep(uint32_t secs, int pin_wake_btn) {
  esp_sleep_pd_config(ESP_PD_DOMAIN_RTC_PERIPH, ESP_PD_OPTION_ON);

  rtc_gpio_set_direction((gpio_num_t)P_LORA_DIO_1, RTC_GPIO_MODE_INPUT_ONLY);
  rtc_gpio_pulldown_en((gpio_num_t)P_LORA_DIO_1);

  rtc_gpio_hold_en((gpio_num_t)P_LORA_NSS);
  loRaFEMControl.setRxModeEnableWhenMCUSleep();

  if (pin_wake_btn < 0) {
    esp_sleep_enable_ext1_wakeup((1L << P_LORA_DIO_1), ESP_EXT1_WAKEUP_ANY_HIGH);
  } else {
    esp_sleep_enable_ext1_wakeup((1L << P_LORA_DIO_1) | (1L << pin_wake_btn), ESP_EXT1_WAKEUP_ANY_HIGH);
  }

  if (secs > 0) {
    esp_sleep_enable_timer_wakeup(secs * 1000000);
  }

  esp_deep_sleep_start();
}

void HeltecV4R8Board::powerOff() {
  enterDeepSleep(0);
}

uint16_t HeltecV4R8Board::getBattMilliVolts() {
  analogReadResolution(12);

  uint32_t raw = 0;
  for (int i = 0; i < 8; i++) {
    raw += analogReadMilliVolts(PIN_VBAT_READ);
  }
  raw = raw / 8;

  return (adc_mult * raw);
}

const char* HeltecV4R8Board::getManufacturerName() const {
#ifdef HELTEC_V4_R8_TFT
  return "Heltec V4 R8 TFT";
#else
  return "Heltec V4 R8 OLED";
#endif
}