mirror of
https://github.com/meshcore-dev/MeshCore.git
synced 2026-10-06 09:58:03 +00:00
TJ Downes
798ce636df
- rename the board class and files to MuziBaseBoard
- uppercase the build flags (MUZI_BASE, MUZI_BASE_SUPERIO)
- name the superIO envs muzi_base_{duo,uno}_superIO_companion_radio_ble so
build.sh picks them up
- set MAX_CONTACTS to 350 like the other variants
- move the pin setup from initVariant() into MuziBaseBoard::begin()
65 lines
1.9 KiB
C++
65 lines
1.9 KiB
C++
#include <Arduino.h>
|
|
#include <Wire.h>
|
|
|
|
#include "MuziBaseBoard.h"
|
|
|
|
#ifdef NRF52_POWER_MANAGEMENT
|
|
const PowerMgtConfig power_config = {
|
|
.lpcomp_ain_channel = PWRMGT_LPCOMP_AIN,
|
|
.lpcomp_refsel = PWRMGT_LPCOMP_REFSEL,
|
|
.voltage_bootlock = PWRMGT_VOLTAGE_BOOTLOCK
|
|
};
|
|
|
|
void MuziBaseBoard::initiateShutdown(uint8_t reason) {
|
|
// Disable LoRa module power before shutdown
|
|
if (reason == SHUTDOWN_REASON_LOW_VOLTAGE ||
|
|
reason == SHUTDOWN_REASON_BOOT_PROTECT) {
|
|
configureVoltageWake(power_config.lpcomp_ain_channel, power_config.lpcomp_refsel);
|
|
}
|
|
|
|
enterSystemOff(reason);
|
|
}
|
|
#endif // NRF52_POWER_MANAGEMENT
|
|
|
|
void MuziBaseBoard::begin() {
|
|
NRF52BoardDCDC::begin();
|
|
pinMode(PIN_VBAT_READ, INPUT);
|
|
pinMode(PIN_BATTERY_CHARGING, INPUT);
|
|
pinMode(PIN_CHARGER_FAULT, INPUT);
|
|
pinMode(LED_PIN, OUTPUT);
|
|
digitalWrite(LED_PIN, LOW);
|
|
// output latches default to HIGH, so pull these low right after enabling
|
|
pinMode(BUZZER_PIN, OUTPUT);
|
|
digitalWrite(BUZZER_PIN, LOW);
|
|
// gps power is driven by the sensor manager (mode switch). off to start.
|
|
pinMode(PIN_GPS_EN, OUTPUT);
|
|
digitalWrite(PIN_GPS_EN, LOW);
|
|
// 12V rail is only needed for the superIO display
|
|
pinMode(SCREEN_12V_ENABLE, OUTPUT);
|
|
#ifdef MUZI_BASE_SUPERIO
|
|
digitalWrite(SCREEN_12V_ENABLE, HIGH); // Enable 12V power for SH1107 display
|
|
delay(250);
|
|
#else
|
|
digitalWrite(SCREEN_12V_ENABLE, LOW);
|
|
#endif
|
|
Wire.begin();
|
|
// delay(1000); // wait for display to initialize. otherwise it doesn't come up on boot.
|
|
|
|
#ifdef PIN_USER_BTN
|
|
pinMode(PIN_USER_BTN, INPUT_PULLUP);
|
|
#endif
|
|
pinMode(PIN_BUTTON1, INPUT_PULLUP);
|
|
pinMode(PIN_BUTTON2, INPUT_PULLUP);
|
|
pinMode(PIN_BUTTON3, INPUT_PULLUP);
|
|
pinMode(PIN_BUTTON4, INPUT_PULLUP);
|
|
pinMode(PIN_BUTTON5, INPUT_PULLUP);
|
|
pinMode(PIN_BUTTON6, INPUT_PULLUP);
|
|
|
|
// #if defined(PIN_BOARD_SDA) && defined(PIN_BOARD_SCL)
|
|
// Wire.setPins(PIN_BOARD_SDA, PIN_BOARD_SCL);
|
|
// #endif
|
|
#ifdef NRF52_POWER_MANAGEMENT
|
|
checkBootVoltage(&power_config);
|
|
#endif
|
|
}
|