mirror of
https://github.com/meshcore-dev/MeshCore.git
synced 2026-03-30 14:55:46 +00:00
b024b9e1a1
The startOTAUpdate() is the same for all NRF52 boards. Use a common implementation for all boards that currently have a specific implementation. The following boards currently have an empty startOTAUpdate() for whatever reasons and therefore are not inheriting NRF52BoardOTA to keep the same state: Nano G2 Ultra, Seeed SenseCAP T1000-E, Wio WM1110. Signed-off-by: Frieder Schrempf <frieder@fris.de>
47 lines
1.2 KiB
C++
47 lines
1.2 KiB
C++
#pragma once
|
|
|
|
#include <MeshCore.h>
|
|
#include <Arduino.h>
|
|
#include <helpers/NRF52Board.h>
|
|
|
|
// built-ins
|
|
#define VBAT_MV_PER_LSB (0.73242188F) // 3.0V ADC range and 12-bit ADC resolution = 3000mV/4096
|
|
|
|
#define VBAT_DIVIDER (0.5F) // 150K + 150K voltage divider on VBAT
|
|
#define VBAT_DIVIDER_COMP (2.0F) // Compensation factor for the VBAT divider
|
|
|
|
#define PIN_VBAT_READ (4)
|
|
#define REAL_VBAT_MV_PER_LSB (VBAT_DIVIDER_COMP * VBAT_MV_PER_LSB)
|
|
|
|
class ThinkNodeM1Board : public NRF52BoardOTA {
|
|
public:
|
|
ThinkNodeM1Board() : NRF52BoardOTA("THINKNODE_M1_OTA") {}
|
|
void begin();
|
|
uint16_t getBattMilliVolts() override;
|
|
|
|
#if defined(P_LORA_TX_LED)
|
|
void onBeforeTransmit() override {
|
|
digitalWrite(P_LORA_TX_LED, HIGH); // turn TX LED on
|
|
}
|
|
void onAfterTransmit() override {
|
|
digitalWrite(P_LORA_TX_LED, LOW); // turn TX LED off
|
|
}
|
|
#endif
|
|
|
|
const char* getManufacturerName() const override {
|
|
return "Elecrow ThinkNode-M1";
|
|
}
|
|
|
|
void powerOff() override {
|
|
|
|
// turn off all leds, sd_power_system_off will not do this for us
|
|
#ifdef P_LORA_TX_LED
|
|
digitalWrite(P_LORA_TX_LED, LOW);
|
|
#endif
|
|
|
|
// power off board
|
|
sd_power_system_off();
|
|
|
|
}
|
|
};
|